One-way paint for the new car in Lithuania - MQL4 and MetaTrader 4

olegplus 2010.02.02 11:56 #201

Vinin >>:

Лучше убери. Смесь ломанного и еще неизвестно чего. Жуткая вещь получается. Хотя можешь в читабельный вид перевести.

The Expert Advisor only works in Buy.

Please make it work in Sell as well with pending orders.

The essence of work: at a distance of 50 pps from the current price set the Buy Stop and Buy Limit with TP 100

two orders at intervals of 50 pps from below and 2 orders from above.

The Expert Advisor works in such a way that there should always be at least 2 pending orders in both directions.

Thanks in advance :)

#property copyright "Slobodyan Oleg"
#property link      "http://www.metaquotes.net"

extern int Orders = 2;
extern double Lots = 0.01;
extern double StepLevel = 50.0;
extern int StopLoss = 3000;
extern int Profit = 100;
double gd_104 = 0.0;

int CheckBS() {
   double l_ord_open_price_12;
   double ld_20 = 0;
   int l_count_8 = 0;
   int l_ord_total_0 = OrdersTotal();
   for (int l_pos_4 = 0; l_pos_4 < l_ord_total_0; l_pos_4++) {
      if (OrderSelect( l_pos_4, SELECT_BY_POS, MODE_TRADES) == TRUE) {
         if (OrderSymbol() == Symbol() && OrderType() == OP_BUY || OrderType() == OP_BUYSTOP && OrderMagicNumber() == 1) {
            if (OrderOpenPrice() - Ask > ld_20 && OrderOpenPrice() - Ask > 0.0) {
               ld_20 = OrderOpenPrice() - Ask;
               l_ord_open_price_12 = OrderOpenPrice();
               l_count_8++;
            }
         }
      }
   }
   if ( l_count_8 == 0) {
      l_ord_open_price_12 = NormalizeDouble(Bid - StepLevel * Point, Digits);
      OrderSend(Symbol(), OP_SELLSTOP, Lots, l_ord_open_price_12, 3, l_ord_open_price_12 - StopLoss * Point - 2.0 * gd_104, l_ord_open_price_12 + Profit * Point + gd_104, "", 1, 0, Navy);
   }
   if ( l_count_8 < Orders && l_count_8 != 0) {
      l_ord_open_price_12 = NormalizeDouble( l_ord_open_price_12 + StepLevel * Point, Digits);
      OrderSend(Symbol(), OP_SELLSTOP, Lots, l_ord_open_price_12, 3, l_ord_open_price_12 - StopLoss * Point - 2.0 * gd_104, l_ord_open_price_12 + Profit * Point + gd_104, "", 1, 0, Navy);
   }
   return (1);
}

int CheckBL() {
   double l_ord_open_price_12;
   double ld_20 = 0;
   int l_count_8 = 0;
   int l_ord_total_0 = OrdersTotal();
   for (int l_pos_4 = 0; l_pos_4 < l_ord_total_0; l_pos_4++) {
      if (OrderSelect( l_pos_4, SELECT_BY_POS, MODE_TRADES) == TRUE) {
         if (OrderSymbol() == Symbol() && OrderType() == OP_SELL || OrderType() == OP_SELLLIMIT && OrderMagicNumber() == 2) {
            if (Bid - OrderOpenPrice() > ld_20 && Bid - OrderOpenPrice() > 0.0) {
               ld_20 = Bid - OrderOpenPrice();
               l_ord_open_price_12 = OrderOpenPrice();
               l_count_8++;
            }
         }
      }
   }
   if ( l_count_8 == 0) {
      l_ord_open_price_12 = NormalizeDouble(Ask - StepLevel * Point, Digits);
      OrderSend(Symbol(), OP_BUYLIMIT, Lots, l_ord_open_price_12, 3, l_ord_open_price_12 - StopLoss * Point - 2.0 * gd_104, l_ord_open_price_12 + Profit * Point + gd_104, "", 2, 0, Navy);
   }
   if ( l_count_8 < Orders && l_count_8 != 0) {
      l_ord_open_price_12 = NormalizeDouble( l_ord_open_price_12 - StepLevel * Point, Digits);
      OrderSend(Symbol(), OP_BUYLIMIT, Lots, l_ord_open_price_12, 3, l_ord_open_price_12 - StopLoss * Point - 2.0 * gd_104, l_ord_open_price_12 + Profit * Point + gd_104, "", 2, 0, Navy);
   }
   return (1);
}

int CheckBS_min() {
   double l_ord_open_price_12;
   double ld_20 = Ask;
   int l_count_8 = 0;
   int l_ord_total_0 = OrdersTotal();
   for (int l_pos_4 = 0; l_pos_4 < l_ord_total_0; l_pos_4++) {
      if (OrderSelect( l_pos_4, SELECT_BY_POS, MODE_TRADES) == TRUE) {
         if (OrderSymbol() == Symbol() && OrderType() == OP_BUY || OrderType() == OP_BUYSTOP && OrderMagicNumber() == 1) {
            if (OrderOpenPrice() - Ask < ld_20 && OrderOpenPrice() - Ask > 0.0) {
               ld_20 = OrderOpenPrice() - Ask;
               l_ord_open_price_12 = OrderOpenPrice();
               l_count_8++;
            }
         }
      }
   }
   if ( l_count_8 == 0) {
      l_ord_open_price_12 = NormalizeDouble(Ask + StepLevel * Point, Digits);
      OrderSend(Symbol(), OP_BUYSTOP, Lots, l_ord_open_price_12, 3, l_ord_open_price_12 - StopLoss * Point - 2.0 * gd_104, l_ord_open_price_12 + Profit * Point + gd_104, "", 1, 0, Navy);
   }
   if ( l_ord_open_price_12 - Ask >= 2.0 * StepLevel * Point && l_count_8 != 0) {
      l_ord_open_price_12 = NormalizeDouble( l_ord_open_price_12 - StepLevel * Point, Digits);
      OrderSend(Symbol(), OP_BUYSTOP, Lots, l_ord_open_price_12, 3, l_ord_open_price_12 - StopLoss * Point - 2.0 * gd_104, l_ord_open_price_12 + Profit * Point + gd_104, "", 1, 0, Navy);
   }
   return (1);
}

int CheckBL_min() {
   double l_ord_open_price_12;
   double ld_20 = Ask;
   int l_count_8 = 0;
   int l_ord_total_0 = OrdersTotal();
   for (int l_pos_4 = 0; l_pos_4 < l_ord_total_0; l_pos_4++) {
      if (OrderSelect( l_pos_4, SELECT_BY_POS, MODE_TRADES) == TRUE) {
         if (OrderSymbol() == Symbol() && OrderType() == OP_BUY || OrderType() == OP_BUYLIMIT && OrderMagicNumber() == 2) {
            if (Ask - OrderOpenPrice() < ld_20 && Ask - OrderOpenPrice() >= 0.0) {
               ld_20 = Ask - OrderOpenPrice();
               l_ord_open_price_12 = OrderOpenPrice();
               l_count_8++;
            }
         }

[Archive!] I will write Can't execute pending orders Questions from Beginners MQL5

olegplus 2010.02.02 11:57 #202

}
   }
   if ( l_count_8 == 0) {
      l_ord_open_price_12 = NormalizeDouble(Ask - StepLevel * Point, Digits);
      OrderSend(Symbol(), OP_BUYLIMIT, Lots, l_ord_open_price_12, 3, l_ord_open_price_12 - StopLoss * Point - 2.0 * gd_104, l_ord_open_price_12 + Profit * Point + gd_104, "", 2, 0, Navy);
   }
   if (Ask - l_ord_open_price_12 >= 2.0 * StepLevel * Point - 2.0 * (Ask - Bid) && l_count_8 != 0) {
      l_ord_open_price_12 = NormalizeDouble( l_ord_open_price_12 + StepLevel * Point, Digits);
      OrderSend(Symbol(), OP_BUYLIMIT, Lots, l_ord_open_price_12, 3, l_ord_open_price_12 - StopLoss * Point - 2.0 * gd_104, l_ord_open_price_12 + Profit * Point + gd_104, "", 2, 0, Navy);
   }
   return (1);
}

int init() {
   return (0);
}

int deinit() {
   return (0);
}

int start() {
   gd_104 = 0;
   CheckBS();
   CheckBL();
   CheckBS_min();
   CheckBL_min();
   return (0);
}

Files:

yolka_1.mq4 6 kb

Victor Nikolaev 2010.02.02 12:02 #203

Vinin писал(а) >>

Check it out. Looks like it's working fine.

Fixed one mistake.

Files:

maxmmovingxaveragec02_1.mq4 4 kb

[Deleted] 2010.02.02 15:27 #204

Vinin >>:

Ошибочку одну исправил

Thank you Victor, I will be in touch if necessary

Gintaras

Vilnius.

[Deleted] 2010.02.02 16:30 #205

Vinin >>:

Ошибочку одну исправил

Victor, when you have time, please do the same for the other car.

Sincerely.

Victor Nikolaev 2010.02.02 16:38 #206

dadi писал(а) >>

Victor, when you have time, please do the same for the other car.

Respectfully.

I'll try, but that's what for.

[Deleted] 2010.02.02 17:06 #207

Vinin >>:

Попробую, только вот зачем

When you need to orient yourself, one-way paints will save you a lot of unnecessary fuss.

Files:

wpsjwondefullostopaline.mq4 1 kb

[Deleted] 2010.02.02 17:09 #208

I see some unnecessary letters added to the names, but maybe it's for the best...

Victor Nikolaev 2010.02.02 17:32 #209

dadi писал(а) >>

I work by hand, I put this one on top and it gives a good entrance and exit without being 'crossed'. When you need to orient yourself quickly, one-directional colours save unnecessary fuss.

Then maybe the dots are not needed at all.

Victor Nikolaev 2010.02.02 17:44 #210

dadi писал(а) >>

If you want to work by hand, put it on top and get a good entrance and exit without "on the cross".

Files:

maxmmovingxaveragec03.mq4 3 kb

[Archive!] Writing an advisor for free - page 21