KopirMT4 Copy trades for MT4
- 实用工具
- Alexandr Gavrilin
- 版本: 5.52
- 更新: 16 六月 2023
- 激活: 5
KopirMT4 Copy trades for MT4
评论 20
Marcin Miniatorski
2021.07.21 14:42
#
all working well, 2 masters, 1 slave, copying fast :)
roberto giovannini
2021.07.12 14:08
#
it works perfectly.
very helpful developer
thank you
推荐产品
The new version of the trading panel, which now has the ability to separately close Buy and Sell orders, display targets for all orders on the chart, as well as the ability to use the panel to trade with brokers working on the FIFO rule. Also, the new version adds option buttons for separate management of open orders.
It has a convenient visualized interface and intuitive control without a lot of additional tabs to which traders have to be distracted and switch their attention. Thanks to this
KopierMaschine - локальный копировщик сделок между различными счетами MetaTrader 4 и MetaTrader 5 в любом направлении расположенных на одном компьютере с интуитивно понятным интерфейсом.
Направления копирования: MT4 --> MT5 MT4 --> MT4 MT5 --> MT5 MT5 --> MT4 для копирования между терминалами MetaTrader 4 и MetaTrader 5 необходимо приобрести версию продукта KopierMaschine для MetaTrader 5 Особенности
Программа работает в двух режимах Master и Slave На один подчиненный счет можно копирова
This copier was originally developed for the professional order management of a team of traders and therefore, first of all, a risk manager was built into it.
For simple operation, you need to configure the following settings:
For the master!
1. Select the program type ''Program mode'' - master 2. Enter a new name for the ''Folder name'' folder, in which the EA will record information on working with orders. The name must be the same for both master and slave!!! 3. In the ''Feedback from
The Best One Scalping Trade Panel functional manual trade panel with risk reward, auto SL by candle ( original solution), lot size calculation, one-click trading, scale in and out of trades (partial close),
Works with all symbols not just currency pairs, perfect works on DAX, NASDAQ, GOLD, ...... I earn every day during live stream on ZakopiecFX - join Me
Risk by lot Risk by percent SL by points SL by Candle, Renko, RangeBar ( original solution)
TP by point TP by Risk/Reward Auto Trailing b
This panel is a part of the SupDem-Pro trading system and is used to search for the best opportunities for any available instruments. Which can be selected manually in the Market Watch (open it with CTRL + M). Using this trading panel in combination with ShvedSupDem-Pro_Zone allows to analyze multiple currency pairs with a single click. The panel allows to load any instruments from the Market Watch, from 6 major currency pairs up to all instruments (480).
The indicator parameters Button Width
用於自動訂單和風險管理的實用程序。讓您從利潤中獲得最大收益並限制您的損失。由執業交易員為交易員創建。該實用程序易於使用，適用於交易者手動打開的任何市場訂單或在顧問的幫助下。可以按幻數過濾交易。該實用程序可以同時處理任意數量的訂單。
具有以下功能：
1. 設置止損和止盈水平；
2. 通過追踪止損位平倉；
3. 設定盈虧平衡水平。
該實用程序可以：
1. 分別處理每個訂單（為每個訂單單獨設置級別）
2. 處理一籃子單向訂單（所有訂單的水平設置相同，買入和賣出分開）
3. 處理一籃子多向訂單（所有訂單的級別都設置為通用的，BUY 和 SELL 一起）
選項：
STOPLOSS - 如果不使用 =-1，則以點為單位止損； TAKEPROFIT - 以點為單位獲利，不與 -1 一起使用；
TRAILING_STOP - 價格變動的點數，如果不使用 =-1； TRAILING_STEP - 每一步利潤將增加的點數；
BREAKEVEN_STOP - 將訂單轉移到盈虧平衡點的點數，如果不使用 =-1； BREAKEVEN_ST
This utility is designed to help you with your Manual Trading. It allows different ways of closing trades. It can display total number of BUY and SELL orders individually and also their individual profits. It can enter trades without stopl loss and take profits. However upon selecting UseStopLossTakeProfit from the settings it can use best possible stop loss and take profits based on the market conditions. Upon selecting the CloseOppositeTrades from the settings it can close opposite trades. Fo
The trade copier is designed for a fast and accurate copying of orders between the MetaTrader 4 terminals. The trade copier copies trades from the Master account to the Slave account by writing information to the total file, which is located in the common directory of the MetaTrader 4 terminals. This allows the trade copier to either customize various schemes for receiving and transmitting trade signals by changing the file name. Reading and writing the copier file is performed by timer. The tra
这是一个预测蜡烛收盘价的指标。 该指标主要用于 D1 图表。 该指标适用于传统外汇交易和二元期权交易。 该指标可以用作独立的交易系统，也可以作为您现有交易系统的补充。 该指标分析当前蜡烛，计算蜡烛本身内部的某些强度因素，以及前一根蜡烛的参数。 因此，该指标预测市场走势的进一步方向和当前蜡烛的收盘价。 由于这种方法，该指标既适用于短期盘中交易，也适用于中长期交易。 该指标允许您设置指标在分析市场情况期间将产生的潜在信号的数量。 在指标设置中有一个特殊的参数。 此外，该指标可以通过图表上的消息、电子邮件以及推送通知的形式通知新信号。感谢您的关注！交易愉快！ 购买后一定要写信给我！ 我会给你我的交易指标的建议！ 还可以获得奖金！
Noize Absorption Index - is the manual trading system that measures the difference of pressure between bears forces and bulls forces. Green line - is a noize free index that showing curent situation. Zero value of index shows totally choppy/flat market.Values above zero level shows how powerfull bullish wave is and values below zero measures bearish forces.Up arrow appears on bearish market when it's ready to reverse, dn arrow appears on weak bullish market, as a result of reverse expectation. S
该指标建立当前报价，可以与历史报价进行比较，并在此基础上进行价格走势预测。指示器有一个文本字段，用于快速导航到所需日期。
选项：
符号 - 选择指标将显示的符号；
SymbolPeriod - 选择指标从中获取数据的时段；
IndicatorColor - 指示器颜色；
HorisontalShift - 由指标绘制的报价移动指定的柱数；
Inverse - true 反转引号，false - 原始视图；
ChartVerticalShiftStep - 图表垂直移动（键盘上的向上/向下箭头）；
接下来是文本字段的设置，您可以在其中输入日期，您可以通过按“回车”立即跳转到该日期。 接下来是文本字段的设置，您可以在其中输入日期，您可以通过按“回车”立即跳转到该日期。
Overview Money management is an all-important aspect of trading that many traders often overlook. It is very possible that even with a winning strategy, bad money management can often result in huge loses. Verdure Forex Calculators aims to help traders minimize risk and exposure in the Forex market. Verdure Forex Calculators implements 4 calculators in one single indicator. It is the first of it's kind on MT4 platform. Calculators implemented are: Lot (Trade or Contract Size) Calculator. Margin
Calculate your account's consistency rule in one click! Works for all HFT Prop Firms: - Nova Funding - Infinity Forex Funds - KortanaFx - Next Step Funded - Quantec And many more! --------------------------------------------------- Settings: profitConsistencyPercentage = Max profit limit per order (%) according to your prop firm. lowerRangePercentage - Lowest range for lot size (%) according to your prop firm. upperRangePercentage - Upper range for lot size (%) according to your prop firm.
--
Write notes directly on the chart and use your observations when trading The option to synchronize reminders between S ymbols allows you to remember important information about the current market state Thus , this utility will help you avoid a situation where important information that you noticed earlier was missed when trading . My #1 Utility : includes 65+ features | Contact me if you have any questio
High-speed trades duplicator, specially designed for copying trades with adjusted lot size and direction at same account. It can be aslo useful for subscribers of SIGNALS service. If you are a subscriber of trading signals then you can see that trading lot size could be different from signal provider to subscriber. Provider can use too big or too small lot size that can be inappropriate for your deposite amount (too risky). Another feature of this copier is a trading direction reverse. It can b
GGP Trade Copier EA is an automatic trading bot that can help traders automatically replicate the trading strategies and operations from one trading terminal to others by experiencing exceptionally fast trade copying system. Its easy-to-use setup allows you to copy trades between multiple MetaTrader terminals on the same Windows computer or Windows VPS with lightning-fast copying speeds of under 0.5 seconds. The software supports multiple trading varieties, including Forex, commodities, stocks,
Panel "panel_kjutaMultiTerminal" for trading. Opens, modifies, closes and deletes trading and pending orders from the chart using virtual lines, buttons and the active information terminal. Automatically opens an order by indicator levels. Hints in Russian, English or disabled. It has a number of functions for trailing virtual Take Profit lines and limit orders. Displays information on the active information terminal. Hides and includes virtual lines S/L , T / P, buttons "<>","M","X", as well a
TWO PAIRS SQUARE HEDGE METER INDICATOR Try this brilliant 2 pairs square indicator It draws a square wave of the relation between your two inputs symbols when square wave indicates -1 then it is very great opportunity to SELL pair1 and BUY Pair2 when square wave indicates +1 then it is very great opportunity to BUY pair1 and SELL Pair2 the inputs are : 2 pairs of symbols then index value : i use 20 for M30 charts ( you can try other values : 40/50 for M15 , : 30 for M30 , : 10 for H1 ,
TakePropips TradePad Pro 包括一个强大的交易管理器、货币强度计、账户报告工具、风险管理工具等等！ 它是您将遇到的最先进的外汇交易经理和交易助手之一！对于想要更有效地管理贸易交易的交易者来说，它是完美的解决方案。 您可以在我们的博文中下载用户手册： User Manual
您可以在 Strategy Tester 上测试此交易系统（启用可视模式）。如果您喜欢在实时图表上进行测试，也可以给我发消息以获取 7 天试用版。
视频教程也可在说明下方获得更多详细信息。
如果您有任何疑问或需要帮助，请随时与我联系，我很乐意提供帮助。
TradePad Pro 适用于所有外汇对、金属、商品、指数和加密货币。 主要特点 订单管理 - 公开市场或挂单，轻松调整止盈、止损和手数大小。 获利计算 - 手动点数、ATR 乘数和风险回报率。 止损计算- 手动点， ATR 乘数和供应/需求。 批量计算 - 手动点， 每笔交易的风险百分比和风险金额。 账户保护 - 回撤保护允许您设置账户回撤的最大限额以避免进一步损失。利润保护为您的账户设置最大利润限额以避免过度交易。 编辑订
Description: Please tick "Show object descriptions" in chart properties to enable hrays views
That utility converts a trendline into a horizontal ray known as tool for drawing supply and demand zones. Simply create a trendline on a chart and once selected, it will get converted. Ray remains horizontal while dragging.
Quick ray plot: press "R" key to create horizontal ray. It will be snapped to the nearest OHLC value
Further versions will be improved. For feature request please post new c
Gold Bricks FX USES THE TREND WAVE INDICATOR AND IT CAN IDENTIFY THE BEGINNING AND THE END OF A NEW WAVE TREND MOVEMENT.
AS AN OSCILLATOR, THE INDICATOR IDENTIFIES THE OVERBOUGHT AND OVERSOLD ZONES.
IT WORKS GREAT TO CATCH THE SHORT TERM PRICE REVERSALS AND USES A MARTINGALE STRATEGY TO CLOSE ALL TRADES IN PROFIT.
USE DEFAULT SETTINGS ON H1 OR HIGHER TIME FRAME ON ANY PAIR FOR MORE ACCURATE TRADES
WHY THIS EA :
Smart entries calculated by 4 great strategies The EA can be run on even a
AW Workpad 是专为手动和半自动交易而设计的多功能交易控制面板。它允许您管理挂单、市场头寸，提供范围广泛的统计数据，以及一组经典指标的多周期分析。 该实用程序由五个选项卡表示： POSITIONS, PENDING, CLOSE, INDICATORS, INFO。每个选项卡都有自己的一组功能，用于处理订单或有关当前市场情况的信息。 MT5版本-> 这里 / 解决问题 -> 这里 特点或优点： 该实用程序适用于所有时间范围和任何符号（货币、指数、石油、金属、股票）。 每个面板的所有元素都有额外的标签，可以看到它只是悬停在任何元素上。 AW Workpad 交易面板具有灵活的设置和直观的面板界面。 您最需要的所有功能都在一个产品中。 交易面板选项卡： . 头寸 - 此选项卡允许您处理和维护市场订单。 打开买入和卖出订单，以及更改这些订单的数量。 为整个订单网络设置和更改止损和获利值。 更改图表上各个头寸的止损和获利值。 一键锁仓，为订单设置盈亏平衡。 尾随调整和改变尾随步骤，反转所有订单。 关闭买入或卖出订单或关闭所有订单。 有关余额、净值、自由资金、提款、点差等的
Was: $249 Now: $99 Market Profile defines a number of day types that can help the trader to determine market behaviour. A key feature is the Value Area, representing the range of price action where 70% of trading took place. Understanding the Value Area can give traders valuable insight into market direction and establish the higher odds trade. It is an excellent addition to any system you may be using. Blahtech Limited presents their Market Profile indicator for the MetaTrader community. Ins
Overview Custom Logic for Trading is a sophisticated automated trading script designed to execute trades based on custom indicator signals, with robust position management features such as trailing stops, break-even settings, and filters. This script allows traders to implement their strategies with high precision and flexibility, enhancing their trading efficiency and profitability. Input Parameters Indicator Settings indicator_name : Name of the custom indicator to be used for generating signa
Panel Trading Reading Custom Indicator for Auto and Manual Trading have Button BUY and SELL , it also has Close All Button and spread to make you easy when trading Manual , for Auto mean Panel Can Reading Custom Indicator what you have , panel also has martyangle with Take profit and Daily target in USD , very usefull , and Best Panel , the indicator must be has arrow buy and sell
MetaTrader 4 的交易复制器。 它从任何账户复制外汇交易、头寸、订单。 它是最好的贸易复印机之一 MT4 - MT4，MT5 - MT4 为了 复制 MT4 版本（或 MT4 - MT5 MT5 - MT5 为了 复制MT5 版本）。 MT5版本
详细描述 +DEMO +PDF 如何购买
如何安装
如何获取日志文件 如何测试和优化 Expforex 的所有产品 复印机 版本 MetaTrader 5 终端 ( МТ5 - МТ5, МТ4 - МТ5 )- Copylot 客户端 MT5 独特的复制算法将所有交易从主账户准确复制到您的客户账户。
该产品还以其高运行速度而著称，并且具有强大的错误处理能力。
一组强大的功能。
该程序可以在多个终端绑定上运行。
使用它作为您在一个账户上交易的多个账户的交易 的同步器 ， - COPYLOT 会将您的交易复制到其他终端。
从已关闭的账户中复制 Invest 密码；
部分关闭仅从 mt4 到 mt4
Инструмент для торговли скальпингом с использованием профиля рынка. Позволяет торговать по рынку, а так же оттачивать навыки торговли в тестере стратегий. При минимальном интерфейсе имеет высокую функциональность и пользу для торговли от уровня Point Of Control (POC). Как торговать с помощью советника - утилиты Market profile scalper, смотрите видео. Настройки - - - - - - Market profile - - - - - - Color rectangle range 1 - цвет прямоугольника 1 диапазона свечей Color rectangle range 2 - цвет пр
The Pipsurfer Trade Manager Is A high level software that will automatically analysis each trading asset and calculate its optimal take profit and stop loss levels for Each trade it is managing. Complete with an easy to use management panel that allows you to manage your risk parameters for each individual trade that you place on each pair. You will have access to trailing stops, break even, partial take profits and account risk percentage features as well
使用 BERG Daily FIBO Pro 释放您的交易潜力 BERG Daily FIBO Pro 是专为 MetaTrader 4 (MT4) 平台设计的强大且可定制的斐波那契回撤指标。无论您是经验丰富的交易者，还是刚刚起步，这个指标都是您识别关键支撑位和阻力位、提升市场分析并优化交易策略的理想工具。 为什么选择 BERG Daily FIBO Pro？ 斐波那契分析的精确性： 借助基于前一天高点和低点自动计算的斐波那契回撤水平，在市场上获得优势。 BERG Daily FIBO Pro 绘制了各个水平（0%、23.6%、38.2%、50%、61.8%、78.6%、100%），帮助您轻松识别潜在的市场转折点。 智能报警系统： 使用可定制的警报系统，确保您不会错过任何机会，当价格触及任何斐波那契水平时，系统将通知您。您可以选择视觉弹出警报或声音信号，随时掌握您的交易动态。 完全可定制的视觉效果： 根据您的交易风格调整指标的外观。调整颜色、线条样式、标签文字、字体大小和位置，创建既信息丰富又赏心悦目的图表。 动态更新：
Now, you have your own AUTO-CLOSE program ! Once your account target or drawdown hits, all open orders will be closed automatically. ========================================== INPUTS: Account target: Put the exact account target. Once the equity hits it or went above that, all orders closed. Please add buffer to consider slippage. Use fixed value or dynamic value: Choose whether you will need a fixed value or dynamic value for drawdown. DYNAMIC SETTINGS: Equity-based or Balance-based drawdown:
该产品的买家也购买
它有助于计算每笔交易的风险，容易安装新的订单，具有部分关闭功能的订单管理， 7 种类型的追踪止损和其他有用的功能。
注意，该应用程序在策略测试器中不起作用。 Manual, Description, Download demo
线条功能 - 在图表上显示开仓线、止损线、止盈线。 有了这个功能，就可以很容易地设置一个新的订单，并在开仓前看到它的附加特性。 风险管理 - 风险计算功能在考虑到设定的风险和止损单的大小的情况下，计算新订单的成交量。它允许你设置任何大小的止损，同时观察设定的风险。 批量计算按钮 - 启用 / 禁用风险计算。 在 " 风险 " 一栏中设置必要的风险值，从 0 到 100 的百分比或存款的货币。 在 " 设置 " 选项卡上选择风险计算的变量： $ 货币， % 余额， % 资产， % 自由保证金， % 自定义， %AB 前一天， %AB 前一周， %AB 前一个月。 R/TP 和 R/SL - 设置止盈和止损的关系。 这允许你设置相对于损失的利润大小。 例如， 1 : 1 - 这决定了 TP = SL 的大小。 2 : 1 - 这意味着 TP 是
Custom Alerts 是一款多功能的多市场监控工具，可识别所有八种主要货币（美元、加元、英镑、欧元、瑞士法郎、日元、澳元和新西兰元）、黄金 (XAU)、基于这些货币的所有 28 种外汇和黄金货币对以及 US30、UK100、WTI、比特币等多达七种指数中的有前景的设置。该工具可完全自定义。该工具从我们的 FX Power、FX Volume 和 IX Power 指标中收集数据，并在发生重大事件时通知您。
开始使用前，您必须在终端上安装好使用过的指标，以便从多市场扫描仪提供的所有选项中获益。
有关功能和各种警报选项的更多详情，请参阅 -> 自定义警报常见问题 Custom Alerts 是一款多功能的多市场监控工具，可识别所有八种主要货币（美元、加元、英镑、欧元、瑞士法郎、日元、澳元和新西兰元）、黄金 (XAU)、基于这些货币的所有 28 种外汇和黄金货币对以及
您认为在价格可以瞬间变化的市场中，下单应该尽可能简单吗？ 在 Metatrader 中，每次您要开单时，您都必须打开一个窗口，您可以在其中输入开盘价、止损和止盈以及交易规模。 在金融市场交易中，资本管理对于维持您的初始存款并使其倍增至关重要。 因此，当您想下订单时，您可能想知道应该开多大的交易？ 在这单笔交易中，您应该承担多少百分比的存款？ 您可以从这笔交易中获利多少，利润风险比是多少？ 在您设置交易规模之前，您需要进行必要的计算，以获得交易规模应该是多少的问题的答案。 想象一下，您有一个工具可以自动完成所有这些工作。 您打开图表，进行市场分析并用水平线标记入场点、防御点（止损）和目标（止盈），最后您定义风险水平，例如 作为可用资本的百分比，您可以在此交易中承担，此时程序提供： 定义风险和止损规模的可接受交易规模 以点数、点数和账户货币计的止损和获利值 风险回报率 现在剩下的就是点击面板上的相应按钮来打开交易。 如果您是黄牛，需要在不设置防御或目标的情况下快速打开和关闭交易，那么您可以在交易管理器面板中轻松掌握一切，您可以在其中定义固定订单参数并通过单击“购买”或 “卖出”按钮。 关闭
疲于复杂的订单下达和手动计算？Trade Dashboard 是您的解决方案。凭借其用户友好的界面，订单下达变得轻而易举，只需点击一下，您就可以开设交易、设置止损和止盈水平、管理交易手数，并计算风险回报比，让您只需专注于您的策略。告别手动计算，使用 Trade Dashboard 简化您的交易体验。
立即下载演示版本 。 您可以在这里找到仪表盘功能和特性的详细信息 。 加入 Telegram 频道 。 购买后请给我发消息以获取支持。如果您需要添加更多功能，可以在产品的评论区留下您的想法，我愿意听取任何建议，希望您能在使用我的产品时获得最佳体验 。 这是 MT5 版本。
风险管理：使用 Trade Dashboard，可以将您的风险设置为账户余额或权益的百分比，或将风险设置为总金额。在图表上直观地定义您的止损，让工具准确计算每个货币对的适当手数。该工具还可以根据您期望的风险回报比自动设置止盈水平。它甚至可以在手数计算中涵盖佣金和点差费用。此外，您的止损和止盈可以转变为虚拟水平，隐藏于经纪商。通过 Trade Dashboard 的高级风险管理功能，掌控风险，保护您的资本。
交易面板是一个多功能的交易助手。 该应用程序包含 50 多个手动交易功能，并允许您自动执行大多数交易操作。 购买之前，您可以在模拟帐户上测试演示版本。 演示 此处 。 完整说明 此处 。 贸易。 让您一键执行基本交易操作： 开立挂单和开仓。 打开订单网格。 平仓挂单和持仓。 仓位反转（平仓买入并开仓卖出，或平仓卖出并开仓买入）。 锁定仓位（通过开立相反仓位使卖出和买入仓位的交易量相等）。 对所有仓位进行部分平仓。 将所有头寸的止盈和/或止损设置为同一水平。 将所有仓位的止损设置为盈亏平衡水平。 开仓订单和仓位时，您可以： 根据既定风险自动计算订单量。 一键打开多个订单。 将计算出的交易量分配给多个订单。 使用面板创建的线条和标记在图表上可视化未来订单的交易水平位置。 开仓时，设置最大点差限制。 使用止盈规模与止损规模的自动比率。 使用虚拟止损和止盈。 将当前点差添加到止损和止盈。 使用 ATR 指标计算止盈和止损。 设置待处理订单的到期日期。 使用挂单跟踪（挂单自动移动到价格后面指定的距离）。 平仓订单和平仓时，您可以： 一键按订单或仓位类型关闭。 只需点击一下，即可仅平仓盈利或无利可
交易管理器可帮助您快速进入和退出交易，同时自动计算风险。 包括帮助您防止过度交易、报复性交易和情绪化交易的功能。 交易可以自动管理，账户绩效指标可以在图表中可视化。 这些功能使该面板成为所有手动交易者的理想选择，并有助于增强 MetaTrader 4 平台。多语言支持。 MT5版本 | 用户指南+演示 交易经理在策略测试器中不起作用。 如需演示，请参阅用户指南 风险管理 根据%或$自动调整风险 可选择使用固定手数或根据交易量和点自动计算手数 使用 RR、点数或价格设置盈亏平衡止损 追踪止损设置 最大每日损失百分比，在达到目标时自动平仓所有交易。 保护账户免遭过多提款并阻止您过度交易 最大每日损失（以美元为单位）在达到目标时自动关闭所有交易。 保护账户免遭过多提款并阻止您过度交易 一键实现所有交易的盈亏平衡 自动计算从手机/电话发送的交易的风险 OCO 在设置中可用
交易和头寸管理 通过设置每月、每周、每天、每小时或每分钟的最大交易次数，停止过度交易和报复性交易。 高级挂单管理。 调整何时关闭挂单的规则 追踪挂单 支持市价订单和挂单 每日最大利润目标（以美元为单位）以确保头寸并停
The product will copy all telegram signal to MT4 ( which you are member ) , also it can work as remote copier. Easy to set up, copy order instant, can work with almost signal formats, image signal, s upport to translate other language to English Work with all type of channel or group, even channel have "Restrict Saving Content", work with multi channel, multi MT5 Work as remote copier: with signal have ticket number, it will copy exactly via ticket number. Support to backtest signal. How to
Unlimited Trade Copier Pro is a tool to copy trade remotely to multiple MT4, MT5 and cTrader accounts at different computers/locations over internet. This is an ideal solution for you if you are a signal provider and want to copy your trades to other receivers globally on your own rules. One provider can copy trades to multiple receivers and one receiver can get trade from multiple providers as well. The provider can even set the subscription expiry for each receiver, so that receiver will not b
下载演示版本 说明 - https://www.mql5.com/ru/blogs/post/758419 处于测试模式 （在测试器中）面板功能 未激活 。我们仅提供了面板本身的视觉显示。
一款能够根据给定的止损水平即时计算头寸规模或风险的工具对于专业交易员和新手交易员来说都至关重要。TRADE PRO 交易实用程序提供快速准确的计算，帮助您在时间敏感且波动的市场中做出决策。 主要功能： 原创。简单。有效。 原始、方便地打开主交易面板：将鼠标移到图表右侧，然后单击适当的方向即可下达未来订单。 快速安装市价单 使用 TRADE PRO 设置您的余额或资本的风险百分比，或指定具体的风险金额。在图表上直观地定义止损水平，让该工具自动计算每种货币对的最佳头寸规模。该工具还可以根据指定的风险/回报率自动设置利润目标（止盈）。 下达多个限价订单以分担总风险 （网格模式）。 无论您进行多笔买入或卖出交易还是遵循网格策略，交易面板都提供了下达多笔限价订单的功能，让您可以将主要风险分散到各个部分，并可进行调整。 在现有的市价单上添加额外的限价单。 为了您的方便，如果您已经有
Grid Manual是一个交易面板，用于处理订单网格。 该实用程序是通用的，具有灵活的设置和直观的界面。 它不仅可以在亏损方向上设置订单网格，还可以在盈利方向上设置订单网格。 交易者不需要创建和维护订单网格，实用程序会这样做。 打开一个订单就足够了，Grid manual会自动为它创建一个订单网格，并伴随它直到非常关闭。 完整说明和演示版 此處 。 该实用程序的主要特性和功能： 伴隨以任何方式打開的訂單，包括從移動終端打開的訂單。 適用於兩種類型的網格：“限制”和“停止”。 使用兩種方法計算網格間距：固定和動態（基於 ATR 指標）。 允許您更改未結訂單網格的設置。 顯示圖表上每個網格的盈虧平衡水平。 顯示每個網格的利潤率。 允許您一鍵關閉網格中的盈利訂單。 讓您一鍵關閉每個訂單網格。 允許您對訂單網格應用追踪止損功能。 允許您在訂單網格上應用將訂單網格的止損轉移到盈虧平衡水平的功能。 相對於訂單網格的盈虧平衡水平自動重新排列止盈（僅在限價網格模式下，距離取決於所選的計算類型：“保守”或“激進”）。 最多可管理 20 個訂單網格，每個網格最多可包含 100 個訂單。
Summer 40% discount ($149 -> $88) Everything for chart Technical Analysis indicator mt4 in one tool Draw your supply demand zone with rectangle and support resistance with trendline and get alerts to mobile phone or email alert - Risk reward indicator Video tutorials, manuals, DEMO download here . Find contacts on my profile .
1. Extended rectangles and trendlines Object will be extended to the right edge of the chart when price will draw new candles on chart. This is rectangle extend
Summer 50% discount ($199 -> $99) Advanced trading tool: One click smart orders that execute under your conditions Developed by trader for trading community: position size calculator (lot size), open position after price action, strategy builder, set and forget trading, mobile notifications...
Risk Management - Risk percentage position size calculator, gain percentage, target risk reward ratio, spread and commissions are included in calculations 7 Advanced order types - Set and forget tra
Drawdown Limiter EA You are in the right place if you were searching for Drawdown control, Drawdown limiter, Balance protection, Equity Protection or Daily Drawdown Limit related to Prop Firm, FTMO, or Funded account trading, or if you want to protect your trading account. Have you suffered from controlling your drawdown when trading funded accounts? This EA is meant for you. Prop firms usually set a rule called “Trader Daily Drawdown”, and if it is not respected, you are disqualified. I am an
将信号从您所属的任何渠道（包括私人和受限渠道）直接复制到您的 MT4。 该工具在设计时充分考虑了用户的需求，同时提供了管理和监控交易所需的许多功能。 该产品采用易于使用且具有视觉吸引力的图形界面。 自定义您的设置并在几分钟内开始使用该产品！
用户指南 + 演示 | MT5版本 | 不和谐版本 如果您想尝试演示，请参阅用户指南。 Telegram To MT4 接收器在策略测试器中不起作用！
Telegram 至 MT4 功能 一次复制多个通道的信号 从私人和受限频道复制信号 不需要机器人令牌或聊天 ID（如果出于某种原因需要，您仍然可以使用这些） 使用风险百分比或固定手数进行交易 排除特定符号 选择复制所有信号或自定义要复制的信号 配置单词和短语以识别所有信号（默认值应适用于 99% 的信号提供商） 配置时间和日期设置以仅在需要时复制信号 设置一次打开的最大交易量 交易和头寸管理 使用信号或自动设置的管理 通过设置每月、每周、每天、每小时或每分钟的最大交易次数，停止过度交易和报复性交易。 支持市价订单和挂单 每日最大利润目标（以美元为单位）以确保头寸并停止
GRID TRADING - Layer Master tool kit is the ultimate, easy to use trading toolkit makes it simple to layer grids of Orders over any entry level. This toolkit will make it simple and fast to Open / Enter and Manage your grid trades on MT4. Every function is simple - but clicking and dragging the order zone - you define an area you want your orders, then you can quickly drag the SL and TP levels to where you want them. Hit one button and your orders are sent!!!
Features: It is capable to send h
货币对相关性和背离的指标 - 同一价格图表上的所有货币对。显示在终端中打开的所有对。
MT5版本
好处 使用多币种交易策略的交易者可以在同一价格图表上直观地观察所选货币对的价格走势，以便比较它们的走势参数。这是叠加图表指标的高级和扩展版本
它是多币种交易相当有效的助手——“配对交易”和“投资组合交易”，有助于提前确定即将到来的走势。
该技术归结为两种策略，第一种策略旨在在重要新闻发布后或交易大厅开放时发现货币对之间的差异。此类工作的逻辑极其简单，假设市场“风暴”平息后，工具价格之间的delta将再次开始收敛，同时建议关注强支撑和阻力位，以避免在强劲阻力下直接买入，并在底部卖出。
识别支撑/阻力位的错误突破。
可能性 翻转图表上的任何一对 以虚拟购买或销售几对的形式揭示历史模式 计算所选路段上的距离，价格以点数过去了多少 直观地确定货币走势的强度 为每个货币对选择不同的显示颜色 显示样式：条形、蜡烛、线条 时间框架同步和所有图表的滚动 在一个主图表上交易任何货币对的能力 与“ CorrelatePairs ”指标一起使用方便
注意力 在一张图
FREE SIGNAL CHANEL: https://t.me/redfox_daily_forex_signals Time saving and fast execution
Whether you’re traveling or sleeping, always know that Telegram To Mt4 performs the trades for you. In other words, Our Telegram MT4 Signal Trader will analyze the trading signals you receive on your selected Telegram channels and execute them to your Telegram to MT4 account. Reduce The Risk
Telegram To Mt4 defines the whole experience of copying signals from Telegram signal copier to mt4 p
一键交易的交易面板。处理头寸和订单！通过图表或键盘进行交易
交易小组进行人工交易。您可以从图表（图表窗口）或键盘进行交易。打开和关闭，反向和锁定。处理职位和订单！ МetaТrader4中主要订单的交易控制面板：买入，卖出，买入，买入，卖出，卖出限制，收盘，删除，修改，追踪止损，止损，止损。 MT5版本
详细描述 +DEMO +PDF 如何购买
如何安装
如何获取日志文件 如何测试和优化 Expforex 的所有产品 从符号窗口交易并从键盘交易！ 您正在为MetaTrader 4终端提供一个独特的插件 - 虚拟控制面板VirtualTradePad。 Description on English 注意！如果您想学习如何交易 策略测试器 ，请查看我们的免费 TesterPad 实用程序 VirtualTradePad在“ MQL5语言最佳图形面板 ”竞赛中 获得二等奖 。 工作标签 职位标签 -使用职位：
开/关买入和卖出， 冲销所有头寸， 锁定一个共同的立场， 更改止损/获利， 设定一般的止损/获利的位置， 启用追踪止损， 实现盈亏
The added video will show you the full functionality, effectiveness, and simplicity of this trade manager. Drag and Drop Trade Manager. Draw your entry and have the tool calculate the rest. Advanced targeting and close portions of a trade directly available in tool (manage trades while you sleep). Market order or limit order on either side with factored spread. Just draw the entry, the tool does the rest. Hotkey setup to make it simple. Draw where you want to enter, and the stop loss, the tool c
For more info join to http://discord.io/reitakfx where you can get info how to set, how to trade or for your questions -------------------------------- If you want this panel and all my other products for FREE , create account here http://bit.ly/reitakfxroboforex and then write me and I will send you all my actual and future product for FREE + VIP on my DISCORD --------------------------------------
Set in panel what margin will use to trade. When you ready to trade, just click to buy or se
Trade Copier Global: The name speaks for itself. This copier allows you to copy orders between MT4 terminals even if they are not installed on the same computer.
Features Copying trades between MT4 terminals around the world with a short delay. Automatically recognizes symbol prefixes. Can connect many Slaves to the same Master. Supports pending and market orders. Supports partial order close (with limitations, see below) Can send messages and notifications to the Slaves from the Master Severa
價格行為工具包 EA 主要為剝頭皮而設計，但可用於所有時間框架，以根據您的止損水平正確計算手數大小來快速進入市場，它允許您快速進入交易（即時或在蠟燭高點和低點掛起訂單），然後隨著市場的變化調整止損並獲利了結。
如需使用的所有功能、設置和最佳實踐策略的完整列表，請單擊此處： https://www.mql5.com/en/blogs/post/748072
基於風險的進入 快速下單按鈕可根據您賬戶的風險百分比讓您進入頭寸。它會根據您選擇的風險和止損距離自動計算您的手數。因此，您需要確保您的經紀商允許您使用 0.01 手大小，如果您被迫使用 0.10 或 1.00 手增量，它將不起作用。
快速交易執行按鈕 它在您的圖表上放置了快速交易執行按鈕，這些按鈕會立即自動打開、關閉或調整交易。除了正常的進場按鈕外，您還有一個快速關閉按鈕來退出所有頭寸，將您的止損移動到盈虧平衡（或您的平均盈虧平衡，如果您有多個交易未平倉），將買入和賣出止損設置在當前或最後一根蠟燭高點之上並且能夠僅平倉您最有利可圖的頭寸，這樣您就可以在多筆交易開始為您工作時從您擴大的頭寸中獲得部分利潤。 止損模式按鈕可讓
跟单->友好的交互界面,丰富的易用功能,追求速度跟单方案. EASY :加载即用(需选择信号源或接收端),自动读取信号源,面板勾选即可, FAST: 快速复制订单,秒跟订单,0.3秒反应 Multiple:1.支持多个信号同时发送,多账户同时选择多个账户复制 2. 多平台支持,MT4 和MT5互通. ( 需同时购买安装MT4和MT5 ) 在此你可以找到市面上没有的功能 . .支持 减仓 ,支持手动 订单绑定 信号订单 上....提供各种 过滤以及指定个性化设置( 给每个信号源或者品种分别制定个性化跟单方案 ) ... [语言支持 中文,英文 ] 增加大手数分单功能 (应用场景,需要跟单较大手数,手数超出平台上限,也可以自己设置的上限,一般应用前者,分单会造成不必要的跟单性能开销,当达到平台单笔手数上限可以分单进行) 增加反向同步平仓功能: 功能启动后 接收端平仓,发送端反向同步平仓. 增加多种跟单内核, ①传统的强映射强绑定方式 ②可以支持设置MAGIC为0 模拟人工开单 ③可以支持默认一种MA
Comprehensive on chart trade panel with the unique ability to be controllable from mobile as well. Plus has a library of downloadable configuration, e.g. exit rules, extra panel buttons, pending order setup and more. Please see our product video. Works with all symbols not just currency pairs. Features On chart panel plus controllable from free app for Windows, iPhone and Android Built-in script engine with library of downloadable configuration, e.g. add 'Close All Trades in Profit' button, exit
智能交易副驾驶： 这是一个智能交易助手，可以帮助您日常的交易管理。智能交易副驾驶配备了用户友好的交易面板，具有现代化的设计并采用了尖端技术。
智能交易副驾驶具有多种功能：
1. 风险管理支持：根据指定的风险百分比和止损自动计算适当的手数，帮助交易者有效管理风险。 2. 风险收益比预览：在开仓前显示潜在的利润和亏损，帮助交易者做出更好的决策。 3. 自动手数计算：根据止损和期望的风险自动调整手数，确保一致的风险管理。 4. 全面的订单管理：允许交易者轻松开立、修改和关闭各种类型的订单，包括市价单和挂单。 5. 保本和平仓跟踪止损：包括一键保本和平仓跟踪止损功能，以锁定利润并减少亏损。 6. 隐藏止损/止盈：允许交易者隐藏止损和止盈水平，防止被经纪商“止损猎杀”。 7. 佣金和点差计算：在开仓前提供佣金和点差信息，帮助交易者了解交易成本。 8. 最大点差过滤：当点差过高时，防止开仓，保护交易者免受不利的市场条件影响。 9. 可定制的风险设置：交易者可以选择按余额的百分比或自定义余额承担风险，提供灵活的风险管理方式。 10. 交易备注：允许为交易添加备注，以便更好地跟踪和组织交易记
The product will copy all Discord signal to MT4 ( which you are member ) , also it can work as remote copier. Easy to set up. Work with almost signal formats, support to translate other language to English Work with multi channel, multi MT4. Work with Image signal. Copy order instant, auto detect symbol. Work as remote copier: with signal have ticket number, it will copy exactly via ticket number.
How to setup and guide: Let read all details about setup and download Discord To MetaTrade
介绍FX28 Trader Dashboard – 您的终极交易管理工具 通过FX28 Trader Dashboard，解锁您交易体验的全部潜力，这是一款全面而直观的交易管理工具，旨在将您的外汇交易提升到新的水平。无论您是经验丰富的交易员还是刚刚开始您的金融之旅，这个强大的工具旨在简化您的交易活动并提高您的决策过程。 主要特点： 用户友好界面： FX28 Trader Dashboard拥有用户友好的界面，适应各个层次的交易员。通过几次点击轻松导航各种功能和工具，确保您只需轻松几下就完全掌控了交易。 实时市场数据： 利用实时市场数据源，始终保持领先地位，为您提供有关货币对、趋势和市场波动的最新信息。做出明智的决策，充满信心地执行交易。 高级交易分析： 通过高级分析深入了解您的交易绩效。跟踪交易历史，分析趋势，并识别模式，以优化您的策略和改善您的结果。 风险管理工具： 用我们强大的风险管理工具保护您的投资。轻松设置止损和获利订单，自定义仓位大小，并轻松实施风险收益比，确保自律和受控的交易方法。 多时间框架分析： FX28 Trader Dashboard允许您同时分析不同时间框架的市
This EA Utility allows you to manage (with advanced filtering) unlimited open orders (manual or EA) with 16 trailing stop methods: fixed, percent, ATR Exit, Chandelier Exit, Moving Average, Candle High Low Exit, Bollinger Bands, Parabolic, Envelope, Fractal, Ichimoku Kijun-Sen, Alligator, Exit After X Minutes or Bars, RSI and Stochastic. The trailing stop can be either real or virtual, and you can exit fully or with a partial close percent on touch or bar close.
Moreover, you can add (overr
The most advanced news filter and drawdown limiter on MQL market NEW: Take a Break can be backtested against your account history! Check the " What's new " tab for details. Take a Break has evolved from a once simple news filter to a full-fledged account protection tool. It pauses any other EA during potentially unfavorable market conditions and will continue trading when the noise is over. Typical use cases: Stop trading during news/high volatility (+ close my trades before). Stop trading when
BBMA Oma Ally Signals Scanner (BBMA Oma Ally Analyzer Dashboard EA) This is a multi-pair and multi scanner dashboard to find the key signal of BBMA Oma Ally Strategy BBMA consists of the use of 2 indicators: Moving Averages Bollinger Bands BBMA consists of many types of entries:
Reentry Extreme Rejection EMA50 GAP (EMA50 to Upper/Lower BB) MHV Full Setup (CSE>TPW>MHV>Direction>Reentry) There are many multi timeframe signals based on this strategy. RRE (Reentry - Reentry - Extreme) REE (Reentry
作者的更多信息
The adviser has been withdrawn from sale / Советник снят с продажи KopirMT5 (CopierMT5) - transaction copier for the MetaTrader 5 terminal, copies (synchronizes, duplicates) transactions from hedge accounts (copier, copy dealers).
Supports copying: MT5 <-> MT5, MT4 -> MT5 Hedge, MT5 Hedge -> MT4 Does not support copying MT5 Hedging < - > MT5 Netting, MT4 < - > MT5 Netting
Why exactly our product? The copier has a high speed and is not dependent on ticks. Copy speed - less than 0.5 sec
筛选:
Nelson Campillay Quevedo
2024.09.25 04:04
#
用户没有留下任何评级信息
2024.09.26 13:28
#
Конечно нужно 2 советника, для каждого из терминалов разной платформы свой советник.
[删除]
2023.03.16 15:12
#
用户没有留下任何评级信息
Eny Sulystyawati
2022.01.22 15:40
#
How to copy mt4 Master this symbol XAUUSD.pro to mt4 Slave symbol XAUUSD.. How to Setting??? Plz help
Ridha Hasani
2022.01.19 06:56
#
good but only 1 problem: EA copier cannot copy the position with symble XAUUSD (in master Mt4) to slave Mt4 with symble Goldmicro, I haven't got any alert in slave mt4, I got: 2022.01.18 15:54:57.238 KopirMT4 Copy trades for MT4 GOLDmicro,H1: Load data orders. Update tick time: 6886880859. Count data: 6 also I have suggestion : we need duplication option after closing the positon in loss in slave mt4 for next position
Ruslan Mustakhimov
2022.01.03 18:07
#
用户没有留下任何评级信息
2022.01.03 19:10
#
Ко мне лично обратитесь, не надо для этого писать в отзывах. Все контакты в профиле продавца.
Marcin Miniatorski
2021.07.21 14:42
#
all working well, 2 masters, 1 slave, copying fast :)
roberto giovannini
2021.07.12 14:08
#
it works perfectly.
very helpful developer
thank you
2021.07.12 14:37
#
my contacts in profile.
Mattia Bernardi
2021.07.06 13:07
#
Hi, I have a problem with Kopir, it does not copy all the trades the "master" opened, it opens only half
2021.07.06 15:46
#
В моем профиле есть ссылка с типовыми проблемами по копиру и их решением, ознакомьтесь пожалуйста. Так же я почти всегда на связи, но лучше мне писать в мессенджеры. Все контакты в профиле указаны.
Abdulaziz Ahmed Mubarak Omar Almenhali
2021.06.24 05:06
#
Great product... works perfectly
Weng Kei Tong
2021.06.10 20:22
#
Hi, i have bought this EA since Nov,2020, but now i can not even update? WhY?
pierangelo
2021.06.07 10:26
#
Non funziona per me, non apre le posizioni sul Client nonostante le impostazioni siano corrette. Help me please.
2021.06.07 11:04
#
мои контакты указаны в профиле, если я на сайте не отвечаю, то пишите в телеграм.
Markus Feldinger
2021.04.29 22:45
#
Excellent, works perfectly. Absolutely worth the money.
Edwin Kurniawan
2021.04.15 03:11
#
Excellet. Auto balance calculation also works well
This utility works well, it is worth paying for it. It would be nice to add a TP/SL money option.
03.31.21: I describe it in the comments tab
2021.03.26 09:40
#
describe your proposal in more detail and with an example for better understanding.
Zamsari Ghani
2021.02.18 15:46
#
5 Star Really Good product, Good support, always updates the latest version with good future added.
Wolfgang Rockert
2021.02.18 12:39
#
Kopir works good, i use it with many signals. Also great help from support! I recommend this copier..
viktor1128
2021.02.10 18:45
#
Скачал демо версию копира неделю тестил очень понравился сегодня купил очень доволен спасибо Александру
版本 5.52
2023.06.16
- исправлено смещение ТР и СЛ
版本 5.49
2023.04.14
- накопительное обновление
版本 5.48
2023.03.16
- накопительное обновление
版本 5.38
2021.02.05
- исправление проверок по комментарию
版本 5.36
2020.12.01
- исправлено копирование лимитных и отложенных ордеров между МТ4 и МТ5
- накопительное исправление ошибок связанные с копированием сделок.
- исправление работы таймаута
- совместимость с обновлением 5.36 KopirМТ5
- накопительное исправление ошибок связанные с копированием сделок.
- исправление работы таймаута
- совместимость с обновлением 5.36 KopirМТ5
版本 5.35
2020.11.30
- накопительное исправление ошибок связанные с копированием сделок.
- добавлены новые опции для переоткрытия сделок:
Reopen maximum - максимальное количество переоткрытий (без учета первой позиции).
- исправлен механизм переоткрытия, теперь для переоткрытия автоматически работает режим scalper mode для входа только по заданной цене или лучше. При переоткрытии после первого ордера игнорируется timeout.
- добавлена новая опция для ограничения копирования отложенных ордеров:
timeout (min) for pending orders - тайм аут для копирования отложенных ордеров, 0 - без ограничений
если включено переоткрытие, то данная опция работает для первого ордера, а потом она игнорируется.
- добавлены новые опции для переоткрытия сделок:
Reopen maximum - максимальное количество переоткрытий (без учета первой позиции).
- исправлен механизм переоткрытия, теперь для переоткрытия автоматически работает режим scalper mode для входа только по заданной цене или лучше. При переоткрытии после первого ордера игнорируется timeout.
- добавлена новая опция для ограничения копирования отложенных ордеров:
timeout (min) for pending orders - тайм аут для копирования отложенных ордеров, 0 - без ограничений
если включено переоткрытие, то данная опция работает для первого ордера, а потом она игнорируется.
版本 5.34
2020.10.16
- исправление копирования BUYSTOP,SELLSTOP
版本 5.33
2020.09.22
- исправление ошибки торговли на счетах GLD
版本 5.32
2020.07.06
- добавлена поддержка счетов с большим количеством цифр, исправлен переноса стоплосс. Исправлена ошибка включения Copy new off при загрузке из ранее сохранённых настроек.
版本 5.31
2020.06.19
- обновлен под новую версию терминала
- добавлен режим остановки копирования новых сделок Copy mode = Copy new off отключает копирование новых ордеров. Старые продолжает контролировать
- добавлен режим остановки копирования новых сделок Copy mode = Copy new off отключает копирование новых ордеров. Старые продолжает контролировать
版本 5.30
2020.05.22
- добавлены функции ограничения минимального и максимального объема. MinLot, MaxLot
版本 5.29
2020.05.11
- исправлен сбой при копировании
版本 5.28
2020.05.10
- исправлено обновление данных
- исправлена работа механизма входа с указанного количества ордеров на сервере, для возможности копирования сделок с усреднениями
- удалена функция Duplication
- удалена функция остановки копирования по количеству сделок на сервере
- удалена функция остановки копирования по количеству на клиенте
- исправлена работа механизма входа с указанного количества ордеров на сервере, для возможности копирования сделок с усреднениями
- удалена функция Duplication
- удалена функция остановки копирования по количеству сделок на сервере
- удалена функция остановки копирования по количеству на клиенте
版本 5.27
2020.05.07
- добавлена поддержка копирования индексов например Volatility 75 Index и подобные названия
- добавлена поддержка копирования и частичного закрытия ордеров с объемов до 3 знаков после запятой
- доработано переоткрытие ордеров, если тейк профит стоит уже неправильно, что может инициировать закрытие сделки сразу, такие сделки копироваться не будут.
- добавлена поддержка копирования и частичного закрытия ордеров с объемов до 3 знаков после запятой
- доработано переоткрытие ордеров, если тейк профит стоит уже неправильно, что может инициировать закрытие сделки сразу, такие сделки копироваться не будут.
版本 5.25
2020.03.15
- исправление определения окончания торговой сессии
版本 5.24
2020.02.10
- добавлена функция задержки открытия сделок относительно предыдущих. Требуется для некоторых брокеров. По умолчанию функция отключена.
版本 5.23
2020.01.15
- исправлено копирование отложенных ордеров для инструментов из кросс таблицы
版本 5.22
2020.01.14
- исправлено копирование XAUUSD
版本 5.21
2020.01.10
- исправлена отмена ТР\СЛ
版本 5.20
2020.01.09
- исправлено перемещение отложенных и лимитных заявок
- исправлен приоритет для кросс таблицы, чтобы можно было применять правила EURUSD=GBPUSD и т.п.
- исправлен приоритет для кросс таблицы, чтобы можно было применять правила EURUSD=GBPUSD и т.п.
版本 5.10
2019.12.16
- исправление расчетов при активированной опции 'Use currency' , которое приводило к неверному расчету лота.
版本 5.0
2019.12.12
Attention! This version is updated only after closing all positions!
- added support for copying MT4 < - > MT5
- reworked the logic of the autolot, now you can include the ratio of balances, shoulders, currencies, by default, the lot multiplier mode is enabled.
- added support for copying MT4 < - > MT5
- reworked the logic of the autolot, now you can include the ratio of balances, shoulders, currencies, by default, the lot multiplier mode is enabled.
版本 4.78
2019.12.02
- правка работы в пятницу , если время ПК отличается от времени брокера.
版本 4.77
2019.11.11
- ребрендинг, обновлена иконка
版本 4.76
2019.11.05
- redesigned the mechanism of opening orders with the specified parameter Points
- fixed the logic of tracking drawdown on the account to stop copying
- fixed the logic of tracking drawdown on the account to stop copying
版本 4.75
2019.09.03
исправление работы с сделками от сигналов
版本 4.74
2019.08.31
Накопительное обновление
版本 4.73
2019.07.19
- исправление ошибки копирования инструментов, содержащих в названии восклицательный знак !
版本 4.72
2019.07.08
- исправление возможной ошибки при переоткрытии
- добавлено игнорирование Timeout, если включено переоткрытие Reopen position
- при первом открытии берет тр и сл исходные если включен режим User can modify orders
- исправление выставления своих тр и сл.
- исправление обновления данных при закрытии на стороне клиента
- добавлен классический трейлинг стоп (trailing stop) и безубыток (bu)
- добавлено игнорирование Timeout, если включено переоткрытие Reopen position
- при первом открытии берет тр и сл исходные если включен режим User can modify orders
- исправление выставления своих тр и сл.
- исправление обновления данных при закрытии на стороне клиента
- добавлен классический трейлинг стоп (trailing stop) и безубыток (bu)
版本 4.71
2019.05.27
снижение нагрузки на процессор
版本 4.70
2019.05.26
снижение нагрузки в выходные дни
版本 4.68
2019.04.30
- исправлена работа с торговыми сессиями, которое приводило к остановке копирования
版本 4.67
2019.04.26
- исправлена отключение торговли на сервере с инвесторским паролем
- возвращена настройка частоты опроса по таймеру, по умолчанию 100 мс
- возвращена настройка частоты опроса по таймеру, по умолчанию 100 мс
版本 4.66
2019.04.18
- обновление для снижения нагрузки при отсутствии сделок
版本 4.65
2019.04.16
- обновление сообщений в журнале Эксперты
版本 4.64
2019.04.15
- исправлена ошибка проверки торговой сессии из-за чего копировщик не копировал сделки
版本 4.63
2019.04.02
- исправление сброса тикета ордера при нехватки маржи на открытие, которое приводило к дублированию сделки.
- обновлены отладочные сообщения
- обновлены отладочные сообщения
版本 4.61
2018.11.23
- исправлено округление лота
版本 4.60
2018.11.20
поправлены комментарии
版本 4.59
2018.11.19
- запрет копирования открытых ордеров с комментарием to #
- исправления обнаруженных проблем
- исправления обнаруженных проблем
版本 4.58
2018.11.02
- отключено дополнительное получение котировок, которое может вызывать задержки при открытии и закрытии.
版本 4.57
2018.09.24
- исправлена ошибка с повторным открытием сделки
版本 4.56
2018.08.14
- убраны из настроек не актуальные параметры
- удалены метки на графике о текущем режиме так как они дулируют сообщение в правом верхнем углу
- добавлен параметр Cross Table , формат ServerSymbol1=ClientSymbol1 можно указать несколько через запятую. Это дополнение к внешнему файлу кросс таблиц kopirmt4_cross.ini
- переименован параметр Dublicator в Duplication
- исправлен механизм таймера, введен резервный механизм на случай сбоя.
- параметр timeout задан по умолчанию 5 минут
- обновлен механизм работы с ордерами, чтобы ускорить с ними работу.
- бесплатная версия будет работать только по AUDUSD так как данная версия предназначена в первую очередь для знакомства с функционалом.
- добавлен трайлинг стоп по % профиту как суммарно по всем копируемым сделкам так и раздельно по каждому из копируемых счетов.
- исправлено закрытие всех сделок по просадке в валюте и %
- несколько мелких улучшений и исправление замеченных ошибок.
- удалены метки на графике о текущем режиме так как они дулируют сообщение в правом верхнем углу
- добавлен параметр Cross Table , формат ServerSymbol1=ClientSymbol1 можно указать несколько через запятую. Это дополнение к внешнему файлу кросс таблиц kopirmt4_cross.ini
- переименован параметр Dublicator в Duplication
- исправлен механизм таймера, введен резервный механизм на случай сбоя.
- параметр timeout задан по умолчанию 5 минут
- обновлен механизм работы с ордерами, чтобы ускорить с ними работу.
- бесплатная версия будет работать только по AUDUSD так как данная версия предназначена в первую очередь для знакомства с функционалом.
- добавлен трайлинг стоп по % профиту как суммарно по всем копируемым сделкам так и раздельно по каждому из копируемых счетов.
- исправлено закрытие всех сделок по просадке в валюте и %
- несколько мелких улучшений и исправление замеченных ошибок.
版本 4.51
2017.09.06
- improved occasional partial closing causing a trade to be closed entirely for no reason
版本 4.50
2017.08.28
- added the options to increase\decrease TP and SL
- added the options to enable copying TP and SL separately
- added the options to enable copying TP and SL separately
版本 4.49
2017.08.16
- minor fixes for copying of pending orders
- fixed copying with consideration of the EURRUB quotes on ruble accounts
- fixed copying with consideration of the EURRUB quotes on ruble accounts
版本 4.48
2017.08.02
- fixed an error with canceling pending and limit order when filtering by comment
版本 4.47
2017.07.24
- added the duplicator mode
- disabled checking the margin for opening limit and pending orders
- disabled checking the margin for opening limit and pending orders
版本 4.45
2017.05.02
- fixed copying of pending orders
- Added the "Use leverage accounts" option, which allows ignoring the leverage ratio when the 'Auto lot = true' mode is enabled
- Added the "Use leverage accounts" option, which allows ignoring the leverage ratio when the 'Auto lot = true' mode is enabled
版本 4.44
2017.04.26
- fixed the lot size rounding
版本 4.43
2017.04.19
- fixed the operation of the lot multiplier for a currency when Auto lot is enabled
- stop copying at the current drawdown, formula is ((Equity/Balance)-1)*100. If the drawdown is lower than or equal to specified, copying is disabled, it is possible to send notifications and force close the positions.
- stop copying at the current drawdown, formula is ((Equity/Balance)-1)*100. If the drawdown is lower than or equal to specified, copying is disabled, it is possible to send notifications and force close the positions.
版本 4.42
2017.03.14
Optimization
版本 4.40
2017.03.01
- Removed the possibility to manage the copier from other Expert Advisors (obsolete feature)
- Removed the possibility to manage another EA AutoTrade Manager (obsolete feature)
- Fixed display of operation mode taking into account current EA state
- Finalized the stop copying mechanism in case equity or margin levels drop; copying shall be resumed once the level is restored.
- Added new mode to stop copying when the margin level (%) drops
- Added sending of notifications by email or push when the margin/equity level drops, noe more than 1 message in 10 minutes
- Redesigned account currency conversion mode during copying, conversion is disabled by default.
- Improved auto comment, added ticket number
- "use currency auto koef" parameter renamed to "use currency accounts"
- New parameters: "alert mail use", "alert push use", "stopout margin level %"
- Added display of the number of positions opened on the server
- In the free version, only copying of EURUSD is available, other pairs are available in paid versions.
- Otstup parameter renamed to Points
- Removed the possibility to manage another EA AutoTrade Manager (obsolete feature)
- Fixed display of operation mode taking into account current EA state
- Finalized the stop copying mechanism in case equity or margin levels drop; copying shall be resumed once the level is restored.
- Added new mode to stop copying when the margin level (%) drops
- Added sending of notifications by email or push when the margin/equity level drops, noe more than 1 message in 10 minutes
- Redesigned account currency conversion mode during copying, conversion is disabled by default.
- Improved auto comment, added ticket number
- "use currency auto koef" parameter renamed to "use currency accounts"
- New parameters: "alert mail use", "alert push use", "stopout margin level %"
- Added display of the number of positions opened on the server
- In the free version, only copying of EURUSD is available, other pairs are available in paid versions.
- Otstup parameter renamed to Points
版本 4.32
2016.12.13
- Word 'reverse' is removed from comments
- Fixed conversion with regard to the account currency. Currently supported account types include USD,EUR,RUB
- Fixed copying of XAUUSD
- Fixed conversion with regard to the account currency. Currently supported account types include USD,EUR,RUB
- Fixed copying of XAUUSD
版本 4.31
2016.10.14
- fixed working with symbols table
- fixed the error with determining the minimum lot
- improved the analysis of partially closed trades
- fixed the error with determining the minimum lot
- improved the analysis of partially closed trades
版本 4.30
2016.04.12
Optimization
版本 4.21
2016.04.07
- fixed the detection of the minimal lot for futures and stocks
版本 4.20
2015.12.01
- Working with prefixes improved
- Scalping mode and indent mode revised, the logics of the entry point limit updated
- Added settings for configuring server requesting frequency
- A new mode allows to activate the server request by a timer or by arrival of ticks to reduce load
- Scalping mode and indent mode revised, the logics of the entry point limit updated
- Added settings for configuring server requesting frequency
- A new mode allows to activate the server request by a timer or by arrival of ticks to reduce load
版本 4.14
2015.11.17
- Fixed shutdown in cases when the specified number of orders on the server and the client is reached
- New functions count_client_orders_stop and count_client_all_orders_use to control the number of orders on the client. Once the specified number of open orders is reached, no more new orders will be copied.
- New functions count_client_orders_stop and count_client_all_orders_use to control the number of orders on the client. Once the specified number of open orders is reached, no more new orders will be copied.
版本 4.13
2015.11.13
- A new function has been added allowing to disable SL and TP modifications when they are modified on the server
版本 4.12
2015.11.12
- fixed order comments
- improved sorting out by comments and magic numbers:
filter magic list
supports ability to specify all magic numbers beginning from specified numbers using * (for example, *1234)
Thus, all orders having the magic number beginning from 1234 will be copied
filter comment list
supports ability to strictly match a comment using ! (for example, !EA_Ilan).
Thus, all orders having a specified comment are copied
- improved sorting out by comments and magic numbers:
filter magic list
supports ability to specify all magic numbers beginning from specified numbers using * (for example, *1234)
Thus, all orders having the magic number beginning from 1234 will be copied
filter comment list
supports ability to strictly match a comment using ! (for example, !EA_Ilan).
Thus, all orders having a specified comment are copied
版本 4.11
2015.11.06
- Timer restart refined
- Saturday and Sunday added to the time manager
- Custom comments fixed
- Saturday and Sunday added to the time manager
- Custom comments fixed
版本 4.10
2015.10.26
Attention: prior to updating the application, wait until all trades are closed in all clients!!! The version is not compatible with the previous ones.
- Improved support of binary options (type UP / DOWN is only supported)
- Improved entry mode by the number of spreads. If spread is zero, the copier automatically switches to entry accuracy in points.
- Changed value of parameter filter slippage = 5.0 for compatibility with previous versions
- Improved support of binary options (type UP / DOWN is only supported)
- Improved entry mode by the number of spreads. If spread is zero, the copier automatically switches to entry accuracy in points.
- Changed value of parameter filter slippage = 5.0 for compatibility with previous versions
版本 4.0
2015.10.15
- Refined closure with the mode 'close price use' active
- Changed order tracking logics for the following new functions (ATTENTION: prior to update the application, let the Copier close all positions, otherwise they will be lost!)
- Added an option for starting and stopping copying by the number of open instruments
- Fixed an error with minimal lot when copying CFD and Forex instruments
- Changed logics of symbol match tables, the table is of a higher priority. The exact match of instruments (full names like in the terminal) should be specified in the table
- New option no_move_stoploss_and_takeprofit that disables shift for stop loss and take profit if position was entered with a deviation. The function is on by default.
- The default value of the use_currency_koef is set to true
- New option slippage_is_count_spread, when set to true activates mode of accuracy based on the number of spreads and the entry accuracy depends on the spread. The function is on by default.
- The following parameters have been renamed:
list accounts for copy, delimiter (,) = server accounts
default lot = fix lot
filter slippage open price = filter slippage
- Changed order tracking logics for the following new functions (ATTENTION: prior to update the application, let the Copier close all positions, otherwise they will be lost!)
- Added an option for starting and stopping copying by the number of open instruments
- Fixed an error with minimal lot when copying CFD and Forex instruments
- Changed logics of symbol match tables, the table is of a higher priority. The exact match of instruments (full names like in the terminal) should be specified in the table
- New option no_move_stoploss_and_takeprofit that disables shift for stop loss and take profit if position was entered with a deviation. The function is on by default.
- The default value of the use_currency_koef is set to true
- New option slippage_is_count_spread, when set to true activates mode of accuracy based on the number of spreads and the entry accuracy depends on the spread. The function is on by default.
- The following parameters have been renamed:
list accounts for copy, delimiter (,) = server accounts
default lot = fix lot
filter slippage open price = filter slippage
版本 3.43
2015.04.21
- corrected reading data by a client (the issue was detected on systems with SSD and HSSD hybrid disks)
- enabled copying take profit and stop loss by default
- enabled copying take profit and stop loss by default
版本 3.42
2015.04.17
- Fixed placing pending and limit orders at certain settings
- Changed lot calculation equation: the description in https://www.mql5.com/en/articles/618#example is used in Autolot mode
- Added support for accounts in different currencies: the terminal should receive quotes in EURUSD and USDRUB. EUR, USD and RUB accounts are supported.
- Ratio calculation can be disabled by setting 'currency auto koef' to 'false'. The mode is disabled by default! This is an experimental function.
- Changed lot calculation equation: the description in https://www.mql5.com/en/articles/618#example is used in Autolot mode
- Added support for accounts in different currencies: the terminal should receive quotes in EURUSD and USDRUB. EUR, USD and RUB accounts are supported.
- Ratio calculation can be disabled by setting 'currency auto koef' to 'false'. The mode is disabled by default! This is an experimental function.
版本 3.41
2015.04.15
- Returned update timeout (sec) parameter for forced update
- Fixed some errors
- Fixed some errors
版本 3.40
2015.04.07
- Improved time synchronization between the server and the client
- Added timeout indication by a fractional number if the deal lifetime is less than 1 minute
- Added automated disabling of stop loss/take profit modification on the client's side if custom stop loss or take profit is enabled and set to zero
- Revised server order tracking algorithm, update timeout (sec) option is no longer required, so it was deleted. Delay parameter is eliminated. It is no longer required.
- Added external control support by means of copying the instrument from EAs and indicators (detailed information will be available in instructions)
- Included support of different currencies; automated correction of a lot will be in the next updates
- Removed deletion of pending order if it triggered before the client's one, which led to omission of entry by pending orders
- timeout parameter default value is 0 again; operational mode selection parameter was renamed in "mode" (default value of this parameter is Server)
Attention: this update is incompatible with previous versions. Close all open positions on clients or wait for their closing before updating!!!
- Added timeout indication by a fractional number if the deal lifetime is less than 1 minute
- Added automated disabling of stop loss/take profit modification on the client's side if custom stop loss or take profit is enabled and set to zero
- Revised server order tracking algorithm, update timeout (sec) option is no longer required, so it was deleted. Delay parameter is eliminated. It is no longer required.
- Added external control support by means of copying the instrument from EAs and indicators (detailed information will be available in instructions)
- Included support of different currencies; automated correction of a lot will be in the next updates
- Removed deletion of pending order if it triggered before the client's one, which led to omission of entry by pending orders
- timeout parameter default value is 0 again; operational mode selection parameter was renamed in "mode" (default value of this parameter is Server)
Attention: this update is incompatible with previous versions. Close all open positions on clients or wait for their closing before updating!!!
版本 3.33
2015.03.25
Fixed copying of comments.
版本 3.32
2015.03.19
3.32
- improved logics of order tracking
- ability to forcedly update добавлена server data, parameter update timeout (sec), the value is set in seconds (the setting is for the server only)
- automatic detection of symbols with prefixes and CFD
- copying of take profit and stop loss of pending orders the way it is done for market orders; the copier does not copy them by default.
Copying is enabled by setting parameters user takeprofit use=false, user stoploss use=false
- automatic comments, adds the number of the account from which trading is copied
- fixes in the operation of exception filters
- improved logics of order tracking
- ability to forcedly update добавлена server data, parameter update timeout (sec), the value is set in seconds (the setting is for the server only)
- automatic detection of symbols with prefixes and CFD
- copying of take profit and stop loss of pending orders the way it is done for market orders; the copier does not copy them by default.
Copying is enabled by setting parameters user takeprofit use=false, user stoploss use=false
- automatic comments, adds the number of the account from which trading is copied
- fixes in the operation of exception filters
版本 3.31
2015.03.10
- Fixed order re-opening when timeout=0
版本 3.30
2015.03.04
- Improved copying of the trades opened in parts on ECN accounts.
- 'timeout' parameter is equal to 5 by default (not 0). The parameter now also affects pending orders as well!
- Improved opening limit and stop orders, especially when working with scalpers and news Expert Advisors.
- Copying stops and take levels is disabled by default in order to speed up the work when copying a great amount of orders.
Pending orders do not receive take and stop levels right after they are placed. Instead, the levels are set right after the order is triggered (if the appropriate options are activated).
By default, take and stop levels are virtual.
- Revised changing a stop loss and take profit in order to improve working with scalper trading robots.
- 'timeout' parameter is equal to 5 by default (not 0). The parameter now also affects pending orders as well!
- Improved opening limit and stop orders, especially when working with scalpers and news Expert Advisors.
- Copying stops and take levels is disabled by default in order to speed up the work when copying a great amount of orders.
Pending orders do not receive take and stop levels right after they are placed. Instead, the levels are set right after the order is triggered (if the appropriate options are activated).
By default, take and stop levels are virtual.
- Revised changing a stop loss and take profit in order to improve working with scalper trading robots.
版本 3.29
2015.02.18
3.29
- added the parameter for setting the history upload depth for clients. It reduces the load during intraday trading.
history count (days) = 1..N; the parameter uses the number of previous days as its value;
- added Time manager settings allowing users to set the time period when coyping trades is allowed. The time is set for each day of week. The time format allows you to set trading periods, for example, 0-10, 13-17 or 22:10-08:00, 15:00-18:59;
- added support for joint operation with AutoTradeManager utility.
- added the parameter for setting the history upload depth for clients. It reduces the load during intraday trading.
history count (days) = 1..N; the parameter uses the number of previous days as its value;
- added Time manager settings allowing users to set the time period when coyping trades is allowed. The time is set for each day of week. The time format allows you to set trading periods, for example, 0-10, 13-17 or 22:10-08:00, 15:00-18:59;
- added support for joint operation with AutoTradeManager utility.
版本 3.28
2015.02.16
- Fixed working with 'otstup' parameter.
- Fixed data download when changing the settings, while open trades are present.
- Added the new option: close price use = false/true. If enabled (true), a trade is closed only if the price is not worse than the close price at the source. 'otstup' parameter is considered.
Attention: save the settings to file before the update!
- Fixed data download when changing the settings, while open trades are present.
- Added the new option: close price use = false/true. If enabled (true), a trade is closed only if the price is not worse than the close price at the source. 'otstup' parameter is considered.
Attention: save the settings to file before the update!
版本 3.27
2015.01.30
- Fixed joint operation of a server and a client on a single account (fixed position opening duplications).
- Fixed take profit, stop loss and Open price modification.
- Fixed the default option 'pause for set takeprofit (min) = 0'.
- Changed scalper mode logic. Now, positive 'otstup' is the minimum number of points the server price should move from the Open one before it is allowed to open a trade. If 'otstup' value is negative, the server price should move in the negative direction for the specified distance from the Open price before it is allowed to open a trade.
- Provided smart stop loss and take profit calculation mode: convergence between the server's and client's position prices is considered.
- Improved sleep mode to reduce the processor load.
- Improved the mode of downloading accounts from different servers.
- Fixed take profit, stop loss and Open price modification.
- Fixed the default option 'pause for set takeprofit (min) = 0'.
- Changed scalper mode logic. Now, positive 'otstup' is the minimum number of points the server price should move from the Open one before it is allowed to open a trade. If 'otstup' value is negative, the server price should move in the negative direction for the specified distance from the Open price before it is allowed to open a trade.
- Provided smart stop loss and take profit calculation mode: convergence between the server's and client's position prices is considered.
- Improved sleep mode to reduce the processor load.
- Improved the mode of downloading accounts from different servers.
版本 3.26
2015.01.22
3.26
- added ability to copy only the specified direction
copy mode = Long & Short, Long Only, Short Only
- added ability to set custom take profit or stop loss (can be specified separately)
user takeprofit use = false, true
user stoploss use = false, true
- added re-opening trades if a trade has been closed on a client's side
reopen position = false, true
- added ability to set take profit for a trade with delay in minutes
pause for set takeprofit (min) = 0..60
- added ability to copy only the specified direction
copy mode = Long & Short, Long Only, Short Only
- added ability to set custom take profit or stop loss (can be specified separately)
user takeprofit use = false, true
user stoploss use = false, true
- added re-opening trades if a trade has been closed on a client's side
reopen position = false, true
- added ability to set take profit for a trade with delay in minutes
pause for set takeprofit (min) = 0..60
版本 3.25
2015.01.15
- A risk manager has been added to stop copying at a preset level of drawdown on the server or client account.
- New functions for filtering trades based on the magic number, comment or symbol.
- New functions for filtering trades based on the magic number, comment or symbol.
版本 3.24
2014.12.22
- minor bug fixes in the table of symbols
- improved data update from server accounts
- improved data update from server accounts
版本 3.22
2014.11.19
Update 17.11.2014
- Updated the mechanism of saving order details and order receipt by clients, load on CPU is reduced to a minimum. Now the copier enters a standby mode when nothing is changed for the orders.
- Added an editable table of tickets (symbol names), if they differ.
Example:
FTSE=#Z
NKD=#NX
DAX=#GX
WT=#EN
XAUUSD=GOLD
XAGUSD=SILVER
For the futures NO NEED to specify month and the last digit of the year (e.g. Z4 (December 2014), the copier will find them automatically)
- Updated the mechanism of saving order details and order receipt by clients, load on CPU is reduced to a minimum. Now the copier enters a standby mode when nothing is changed for the orders.
- Added an editable table of tickets (symbol names), if they differ.
Example:
FTSE=#Z
NKD=#NX
DAX=#GX
WT=#EN
XAUUSD=GOLD
XAGUSD=SILVER
For the futures NO NEED to specify month and the last digit of the year (e.g. Z4 (December 2014), the copier will find them automatically)
版本 3.21
2014.10.30
Now it considers the leverage of the client and server for automatic calculation of the volume.
版本 3.20
2014.10.24
- Fixed partial closing issue
- Added exclusion function to work in filters with "-" operator. For example, -EURUSD gives command not to copy the EURUSD trades.
- Added exclusion function to work in filters with "-" operator. For example, -EURUSD gives command not to copy the EURUSD trades.
I am very satisfied and rented KopirMT4 for 1 year. Thanks to the author for the nice work.