Signals: Changed the algorithm for calculation of the copied deal's volume in case a Signal Source and a Subscriber have different leverages:
Current algorithm: A deal volume is changed in direct ratio to the correlation of a Signal Source's leverage with a Subscriber's one. It means that if a Signal Source having a leverage of 1:100 opens a deal of 1 lot, a Subscriber having a leverage of 1:500 will open a deal of 5 lots in case of 100% copying and a deposit matching by size and currency. A subscriber having a leverage of 1:10 will open a deal of 0.1 lots in similar conditions.
New algorithm: If subscriber's leverage exceeds the one of the Signal Source, it does not affect a volume of a copied deal. Otherwise, the deal volume is changed in direct ratio to the correlation of a Signal Source's leverage with a Subscriber's one.
It means that if a Signal Source having a leverage of 1:100 opens a deal of 1 lot, a Subscriber having a leverage of 1:500 will open a deal of 1 lot in case of 100% copying and a deposit matching by size and currency. A subscriber having a leverage of 1:10 will open a deal of 0.1 lots in similar conditions.
シグナル配信登録者の出来高/ロットサイズ計算について質問されたので、フォローすることにします。
Signals: Changed the algorithm for calculation of the copied deal's volume in case a Signal Source and a Subscriber have different leverages:
Current algorithm: A deal volume is changed in direct ratio to the correlation of a Signal Source's leverage with a Subscriber's one. It means that if a Signal Source having a leverage of 1:100 opens a deal of 1 lot, a Subscriber having a leverage of 1:500 will open a deal of 5 lots in case of 100% copying and a deposit matching by size and currency. A subscriber having a leverage of 1:10 will open a deal of 0.1 lots in similar conditions.
New algorithm: If subscriber's leverage exceeds the one of the Signal Source, it does not affect a volume of a copied deal. Otherwise, the deal volume is changed in direct ratio to the correlation of a Signal Source's leverage with a Subscriber's one.
It means that if a Signal Source having a leverage of 1:100 opens a deal of 1 lot, a Subscriber having a leverage of 1:500 will open a deal of 1 lot in case of 100% copying and a deposit matching by size and currency. A subscriber having a leverage of 1:10 will open a deal of 0.1 lots in similar conditions.
また、メタトレーダーの最新ビルドでは、ロットサイズ/ボリュームに関連するいくつかの変更が 行われています。
現在のアルゴリズム: 取引量は、シグナル発信元と受信者のレバレッジの相関に直接比例して変更されます。つまり、レバレッジ1:100のシグナルソースが1ロットの取引を開始する場合、レバレッジ1:500の加入者は、100%のコピーとサイズおよび通貨が一致する預金の場合、5ロットの取引を開始します。1:10 のレバレッジを持つ加入者は、同様の条件で 0.1 ロットの取引を開始します。
新しいアルゴリズム: 加入者のレバレッジがシグナルソースのレバレッジを超える場合、コピーされた取引の数量に影響を与えません。それ以外の場合、取引量はシグナルソースのレバレッジと加入者のレバレッジの相関関係に直接比例して変更されます。
つまり、レバレッジ1:100のシグナルソースが1ロットの取引を開く場合、レバレッジ1:500の加入者は、100%のコピーとサイズと通貨で一致する預金の場合に1ロットの取引を開くことになります。レバレッジが1:10の加入者は、同様の条件で0.1ロットの取引を開始することになります。
そして、購読者が購読時にどのロットサイズになるかを理解するためのメインページ - この1https://www.metatrader5.com/en/terminal/help/signals/signal_subscriber(「コピー取引操作、数量計算」の言葉から始まる)。ロシア語で同じhttps://www.metatrader5.com/ru/terminal/help/signals/signal_subscriber(誰かが英語よりもロシア語を好む場合、例えば)。
参考までに。
これはonewithzachyによって 作られた非常に良いポストです。この投稿はこちら(MT5データ、ギャップデータ、MT5インスタンスを1つインストールするだけで、ブローカーのサーバーを見つけて口座を開設する方法について書かれています)です。
这篇文章是开始寻找鳄鱼
なぜMT5には先物や株価指数、CFDがないのですか?
画像でご確認ください。
しかし、それはとにかくブローカーに依存します。
備忘録として良い指標をいくつか。
とスプレッドについてangevoyageurによって 開始されたいくつかの良いスレッド ここでフローティングスプレッドまたは固定スプレッド? ちょうど読むと週末の間に何かを議論するために...
念のため。
メタトレーダー5のはじめかた
さて......MT5に関する重要な記事はこれです(私見です、すみません)。
メタトレーダー5 - あなたが想像できる以上の もの!
この記事のタイトルを見てはいけない - と思われる - タイトルはプロモーションの一つです。
私はコンテンツの話をしている - コンテンツは本当に素晴らしいですし、この記事内の良いリンクがたくさんある。
だから、基本的に-私はこの1つから始めました。
後で、私は何が好きで、何が嫌いで、何が理解できないかについて説明することができます。
例えば、チャート上でマウスを使ってSL/TPを移動させるという機能はとても気に入っています。
私はほぼ毎日取引をしているので、これは私が好きなものです:ストップロス/テイクプロフィットは、チャート上のラインとしてマウスで移動させることができます。
プログラミングについて - 私は個人的にicustomで立ち往生していた...あなたはMT4のためにそれを知っている - それは本当に問題かもしれません:指標は3他の指標に基づいていた場合、そのうちの一つは、他の2に基づいているので...。
この記事も思い出してください
Metatrader 5の始め方
良い質問と良い返事ですね。
詳しくはStrategy Tester VisualizationとIndicatorsを ご覧ください。
トレーダーのための備忘録として最後の1つ
MetaTrader 5 クライアントターミナルのビルドの変更点一覧
MetaTrader 5 クライアントターミナル ビルド 773
ワンクリック取引パネルの表示/非表示は、左上のアイコンまたはコンテキストメニューコマンドを使用します。このアップデートは、LiveUpdateシステムを通じて入手できます。