Update an EA to generate signals based on RSI and BB, not auto trading

MQL4 Experts

Spécifications

I need to update my existing EA.

I describe existing features that were developed in EA for you to understand easily.


************** EXISTING FEATURES ***********************************************************************************************************

PART 1: CREATE SIGNAL

 

1/ I want an EA that have following input parameters:


2/ When running, the EA loking is like this:

 

If RSI is below oversold level, mark it green. If RSI is above overbought level, mark it red.

 

3/ The alert works when it meets these conditions

The idea is that it only alerts/pushes notification if RSI is above the overbought level whereas symbol’s price is at upper band of Bollinger Bands (BB); and vice versa.

 

I describe the conditions in case BUY signal will be fired, SELL signal is opposite.

BUY signal fires when:

1.     When RSI crosses oversold level, EA notices and checks BB until following conditions are met.

2.     After there was a bull(green) candle formed up completely and BB lower band CUTS THROUGH that candle OR the whole candle is below BB lower band, EA fires alert. 

3. The bull candle don't need to form right after RSI crossed level. When RSI crossed level, EA should remember and check BB continuously to find the right green candle.

  

These are some examples:


 

 

4/ It only alerts once when condistions are met. The alert only fires again if RSI goes back into oversold-overbought zone and crosses again

 

5/ The text in app’s  notification looks like: <symbol>_<timeframe>_BUY/SELL

For example: EURUSD_M5_BUY      GBPUSD_M1_SELL

 

PART 2: CHECK BREAKEVEN

I usually use hedge orders to cover losing order. I need to keep track if these orders are breakeven to close all.

For example: I buy 1 lot EURUSD order, after that I create another 2 lot EURUSD order if price decreases. I need EA tracks if the sum of these 2 orders is breakeven and notifies me via my app.

EA will sum all orders of a symbol including commission/swap to broker and anything to be sure that the sum of symbol’s orders is 0.

This alerts only initiated if there are more than 1 order of that symbol (>= 2 order)

EA will notify once time.

Text is: <symbol>_BREAKEVEN

            For example: EURUSD_BREAKEVEN

************************************************************************************************************************************************************************

 

*** REQUIRED FEATURES FOR UPDATE ***

 

PART 3: UPDATE PART 1

As described in Part 1, EA fires alert when these conditions are met

BUY signal fires when:

1.     When RSI crosses oversold level, EA notices and checks BB until following conditions are met.

2.     After there was a bull(green) candle formed up completely and BB lower band CUTS THROUGH that candle OR the whole candle is below BB lower band, EA fires alert. 

Now, I want to modify these conditions.

EA will fire alert when:

After condition number 2 was met, there is another bull candle forming up after it. 

It means that after RSI crosses oversold level, there must be 2 bull candles forming up consecutively.


PART 4: ON/OFF ALERT TYPES

Currently, there are 2 types of alerts existing in current EA.
1/ Signal BUY/SELL alert

2/ BREAKEVEN alert

I need to be able to enable/disable them seperately.

For example: when I disable Signal Alert, there will be no Signal Alert but there is still Breakeven Alert.


PART 5: AUTO PLACE ORDERS

*** THE MOST CRUCIAL PART ***

The idea is when I place 2 hedged orders, EA will create multiple waiting orders (only virtual orders in memory of EA, NOT pending or open orders) at the prices of those 2 orders to create a zone that if price go to upper/lower band, EA will place order to hedge the opposite orders.

BUY order is only created if there was a SELL order placed right before it and vice versa.


So, we need to care about 2 things of waiting orders:

1. Order’s lot

2. Order’s price

---

1.     Order’s lot

The next BUY order’s lot = (parameter Z x total number of lots of current SELL orders) – (total number of lots of current BUY orders)

The next SELL order’s lot = (parameter Z x total number of lots of current BUY orders) – (total number of lots of current SELL orders)

 

For example,

+ parameter Z is a list, not a number. Z are 3 and 2

+ 1st order is Buy 1 lot, 2nd order is SELL 2 lot. These 2 orders are base for waiting orders.

+ Then the 1st waiting order uses Z=3, it is BUY with lot = 3 x 2 – 1 = 5. 

+ The 2nd waiting order uses Z=2, it is SELL with lot = (2 x (1+5)) – 2 = 10.

 

2.     Order’s price

All waiting BUY orders have the same price as available BUY order

All waiting SELL orders have the same price as available SELL order

---

 

The parameters for EA: list of parameter Z, separated by comma.

Waiting orders’ lot are calculated consecutively

 

For example: Z = 2,3,1.5,1.5,3,3

1st waiting order uses Z=2

2nd waiting order uses Z=3

3rd waiting order uses Z=1.5

********************************************************************************************************************

*** EA WILL WORK LIKE THIS ***

  • The condition for EA to start creating waiting order

The trigger of EA's waiting order creation is there is the 2nd order of a symbol which is opposite to the 1st one (hedged). 

That 2nd order can be placed by myself or from a pending order.

 

In case I placed 1st order as BUY

Then 2nd order I place BUY also. There is NO trigger.

Then 3rd order I place SELL order or SELL pending order is activated. EA starts creation.

 

Then EA sets up all waiting orders (NOT pending orders, just virtual orders in EA's memory) following above rules.

After setting up, EA should show table like this on screen

Symbol

Buy/Sell

Lot

Price

Action

EURUSD

Buy

1

1.2504

Delete | Edit | Move up/down

EURUSD

Sell

2

1.2564

Delete | Edit | Move up/down

GBPUSD

Sell

2

1.4455

Delete | Edit | Move up/down

GBPUSD

Buy

1.5

1.4646

Delete | Edit | Move up/down

 

All waiting orders will be listed in this table AT THE SAME TIME.

In Action column:

    + Delete: delete that order

    + Edit: edit symbol, lot, price and buy/sell
    + Move up/down: to adjust the order (arragement) of that waiting order. For example: make 5th order go up to become 3rd order

 

Orders of the same symbol are listed adjacently to each order.

The order (arrangement) of waiting orders of a symbol is important and according to list Z, in which waiting orders are created. 

---

I also need a function to add waiting order manually

---

 

After those waiting orders were set, the EA will work like this (independently for each symbol)

+ The waiting order which was created first is placed as pending order.

+ If the 1st one was activated, the 2nd order is placed as pending order

+ And so on


  ·        Each time a pending order is activated, EA erases all SL/TP of open orders of that symbol.

         ·        There is always ONE pending order for each symbol 

         ·        ALWAYS create pending order, DO NOT build the way that EA will automatically place position at the price of waiting orders.

         ·        If there is no open order of that symbol anymore (I closed them), EA should delete all waiting and pending orders of that symbol

For clearer explanation, I demonstrate an example. 

Please review carefully.

-------

I trade EURUSD.

1st trade, I place 0.1 lot BUY at price 1.2500

Then I place a pending order 0.2 lot SELL 1.2400

When price hits 1.2400, the pending SELL order is activated and it's the 2nd order in our EA's logic.

At the moment 2nd order is activated, EA starts creating waiting orders.

Parameter Z list is 2,3,1.5,1 (for example)

These are waiting orders:

  • 1st waiting order uses Z=2. It's BUY STOP. At price 1.2500. Lot = 2 x 0.2 - 0.1 = 0.3
  • 2nd waiting order uses Z=3. It's SELL STOP. At price 1.2400. Lot = 3 x (0.1+0.3) - 0.2 = 1
  • 3rd waiting order uses Z=1.5. It's BUY STOP. At price 1.2500. Lot = 1.5 x (0.2+1) - (0.1+0.3) = 1.4
  • 4th waiting order uses Z=1. It's SELL STOP. At price 1.2400. Lot = 1 x (0.1+0.3+1.4) - (0.2+1) = 0.6

All of these waiting order are created in memory of EA, and SHOWED on waiting order table. ALL OF THEM have to be on table for modification and tracking.

These waiting orders are in the order (arrangement) which are created. And becoming pending order with that order.

In case EA creates waiting orders for many symbols, orders of same symbol should be next to each other.

After creation, the 1st waiting order becomes pending order. This happens right away after creation of all waiting orders because the previous pending order (2nd order at the beginning) was activated.

When price hits price 1.2500, that pending order is activated. And 2nd SELL STOP becomes pending order.

When SELL STOP pending order is activated at price 1.2400, 3rd waiting order becomes pending order and so on.

*** NOTICE: waiting order has to become pending order first, then it's activated at market's price. NOT THAT EA turns waiting order to open order when market hits waiting order's price

 


Répondu

1
Développeur 1
Évaluation
(94)
Projets
148
59%
Arbitrage
16
38% / 13%
En retard
25
17%
Gratuit
2
Développeur 2
Évaluation
(219)
Projets
370
42%
Arbitrage
145
17% / 41%
En retard
124
34%
Gratuit
3
Développeur 3
Évaluation
(204)
Projets
304
39%
Arbitrage
34
32% / 29%
En retard
82
27%
Travail
4
Développeur 4
Évaluation
(195)
Projets
395
28%
Arbitrage
155
20% / 52%
En retard
112
28%
Gratuit
Commandes similaires
I need a developer who can take my open source unirenko bars for NT8 and tweak the settings to my specs and rename them to what I want. All I want to change is to code in a divisor and user defined settings renamed and order relisted. For example .. . Let's say you enter 5 for Tick Trend. I want my bars to be coded with a 3X divisor, so you would actually enter 15 (BUT you will still get a 5 setting for the
Hello everyone....i need an EA for automatic trading in a 15 min timeframe. It should First identify a trend: On a dynamic support and resistance level, there must be at least two higher lows and two higher highs for a positive trend, and conversely, at least two lower highs and two lower lows for a negative trend. If the trend is positive, at the end of the retracement, i.e., after two consecutive bullish candles
hello i have some questions about renko. aswell have som ideas for a renko expert who create renko bricks. i need somebody who know the renko wroking and behavior aswell has much experinces with it. i have renko builder as mql4 file but i need some etxra options... lets talk about
Hello, I am looking to develop an EA that recognizes Engulfing patterns on multiple time frames, take Bias and signal from Higher time frames and Entry from Lower time frame. I would also like to add features like stop loss, opposite trade in case of stop loss and arrow signal at the point of entry
1. Overview The bot is designed to execute a dual grid trading strategy with both buy and sell orders placed at predefined grid intervals. It is non-directional , meaning it does not follow any signals or trends. The bot operates continuously, opening new orders as soon as a TAKEPROFIT or STOPLOSS is triggered. It is optimized for synthetic indices but can be adapted to other assets. 2. Core Features Dual Grid
I need a forex Robot that will trade based on the order block and candle stick pattern, the robot should scalp and swing. It should open trades on Order block and continue to open more trades as per candle stick in order of time frames. The robot should buy and sell. If the Market is buying the robot should open buy trades only, if the Market is selling, sells only and each trades open if the last candle stick was
Hi! Do you have a highly profitable Expert Advisor (EA) forex trading robot that’s compatible with both MT4 and MT5? If so, I’d love to see any supporting details about the EA’s performance. This includes backtesting results—either screenshots or videos—as well as a demo version to test the algorithm’s accuracy so as to make a purchase. Additionally, a brief explanation of the trading strategy used to develop the EA
Hi Everyone, I am looking to hire a developer to create an Expert Advisor (EA) for MetaTrader 5, utilizing two custom indicators: HalfTrend and Squeeze Momentum . The EA should be designed based on specific trading conditions which I will detail below, and it should also include comprehensive optimization and backtesting. Project Details: Indicators to be Used: HalfTrend Indicator : Should generate buy/sell
I have a complex indicator which is made by another coder before , but if i open a chart and run the indicator, then after some times i open new chart the same as before and run indicator on new chart again, the the recent signals on new chart is diffrent from the chart which was opened before!!! if anyone can solve it message me
Hi, Thanks for looking at the requirement. This job is like adding few rules and CSV export to signals generated in an indicator. please look at the specs and let me know if u have any queries. Thanks :) 1. Filters Candles Based on Open: True/False Buy candles arrows should have the open above the EMA Sell Candles arrows should have the open below the EMA 2. Limit Placement Criteria: True/False When an

Informations sur le projet

Budget
40 - 80 USD
Pour le développeur
36 - 72 USD
Délais
de 3 à 7 jour(s)