Creation of EA based on several indicators

Trabajo finalizado

Plazo de ejecución 2 horas
Comentario del Ejecutor
Great Customer. Explains Everything Very Clearly. Looking Forward to code for him Again.
Comentario del Cliente
Developer was nice and patient even when I've decided to trim down my requirements specifications. EA was completed in way less than the specified time period. Overall, I'm happy with the results!

Tarea técnica


I’m looking for a developer to help me in creating an Expert Advisor to automate trading in forex. 


Possible indicators required based on strategy:

Moving average

MACD

Break of high/low


Overall Strategy for EA

For Buys setup:

  1. Price must be trading and closing above 200EMA.
  2. MACD line crosses above Signal line, while both are below 0. 
  3. When the above 2 conditions occur, the immediate candle that closes is the signal to place a buy stop around 1-2 pips above the high.
  4. If the next candle breaks the high by 1-2 pips, buy stop will be activated. 
  5. If the next candle fails to break the high by 1-2 pips before it closes, the buy stop should be cancelled. 


For Sells setup:

  1. Basically the opposite of Buys setup


I would also like to include some variations of TP/SL and perhaps some other variations to optimize this EA.

For example,

  1. Placing SL @ 1ATR below the signal candle and having TP @ 1.5-2 RR ratio.
  2. Trailing SL 
  3. Maximum spread to open trade
  4. Auto money management
  5. One chart setup


Other optimizations can be made along the way.



Han respondido

1
Desarrollador 1
Evaluación
(878)
Proyectos
1391
67%
Arbitraje
117
32% / 42%
Caducado
215
15%
Libre
2
Desarrollador 2
Evaluación
(2077)
Proyectos
2636
61%
Arbitraje
113
45% / 26%
Caducado
418
16%
Trabaja
3
Desarrollador 3
Evaluación
(322)
Proyectos
350
52%
Arbitraje
5
80% / 20%
Caducado
1
0%
Trabaja
4
Desarrollador 4
Evaluación
(15)
Proyectos
16
19%
Arbitraje
2
0% / 50%
Caducado
1
6%
Libre
5
Desarrollador 5
Evaluación
(126)
Proyectos
160
36%
Arbitraje
4
25% / 50%
Caducado
13
8%
Libre
6
Desarrollador 6
Evaluación
(169)
Proyectos
204
30%
Arbitraje
25
40% / 44%
Caducado
12
6%
Libre
7
Desarrollador 7
Evaluación
(40)
Proyectos
76
39%
Arbitraje
0
Caducado
0
Libre
8
Desarrollador 8
Evaluación
(333)
Proyectos
352
71%
Arbitraje
4
100% / 0%
Caducado
1
0%
Trabaja
9
Desarrollador 9
Evaluación
(63)
Proyectos
84
26%
Arbitraje
23
22% / 48%
Caducado
23
27%
Libre
10
Desarrollador 10
Evaluación
(119)
Proyectos
169
38%
Arbitraje
9
78% / 22%
Caducado
15
9%
Libre
11
Desarrollador 11
Evaluación
(264)
Proyectos
538
50%
Arbitraje
55
40% / 36%
Caducado
224
42%
Trabaja
12
Desarrollador 12
Evaluación
(196)
Proyectos
318
35%
Arbitraje
64
13% / 56%
Caducado
82
26%
Libre
13
Desarrollador 13
Evaluación
Proyectos
0
0%
Arbitraje
0
Caducado
0
Libre
14
Desarrollador 14
Evaluación
(2422)
Proyectos
3042
66%
Arbitraje
77
48% / 14%
Caducado
340
11%
Trabaja
15
Desarrollador 15
Evaluación
(41)
Proyectos
88
14%
Arbitraje
30
30% / 53%
Caducado
36
41%
Trabaja
16
Desarrollador 16
Evaluación
(34)
Proyectos
60
23%
Arbitraje
11
73% / 9%
Caducado
3
5%
Libre
17
Desarrollador 17
Evaluación
(87)
Proyectos
114
26%
Arbitraje
7
29% / 57%
Caducado
5
4%
Libre
Solicitudes similares
I am seeking a highly skilled and experienced developer to assist with an important project. I need a development of an automated trading bot for NinjaTrader, utilizing a 4 SMA (Simple Moving Average) crossing strategy, with additional custom diversions for trade entries. The bot needs to be based on a strategy involving the crossing of four different SMAs. The exact periods for these SMAs and the conditions for
So i have copier EA. The idea is the EA will triggered through manual OP by user via mobile or whatever platform. Let's say 0.01 lot to trigger it. After the EA takes master's position, the EA will be standby mode. If the master take more OP, the EA still not take the master's position (OP) until the user input manually once again via mobile for another 0.01 lot. Since this is a MT4 EA, Whenever user want to close
preciso de um robô com duas médias móveis, uma exponencial high e uma exponencial low. preciso também ter a opção de utilizar e todos os tempos gráficos e alterar os parâmetros das médias. entrada de compra será feita quando um candle de alta romper e fechar a cima da média high e fechará a posição quando um candle de baixa romper e fechar a baixo da média low. a venda será feita quando o candle de baixa romper e
Description - An expert advisor(s), placing sell trades in EUR/USD, based on the close price of the previous two candles, as shown in the figure below. The trades would be made in the 5 minute, 1 hour, and 1 day timeframes. In the 5 minute and 1 hour timeframes the market orders would be placed at the start of a new candle, at specific times EST. The order would be cancelled at the close of that candle, i.e after 5
Greetings, As the title suggests, I am trying to convert an indicator that calls itself via an iCustom call like this. iMAArray_Buffer[loop_1] = iCustom ( NULL , Selected_TF, MQLInfoString ( MQL_PROGRAM_NAME ), "calculate" , RPeriod, MType, MPeriod, 1 , shift); Full code will not be provided, only the position that needs fixing. I cannot get this working in MQL5 but the original code runs smoothly in MQL4. Please
Hi, I have an indicator from my friend, I want to copy it to my own Traidingview or MT5 can you do that for me. Here is the link
Hi, I have an indicator from my friend, I want to copy it to my own Traidingview or MT5 can you do that for me. Here is the link
Greetings great developer, I am in search of a highly skilled developer to assist with an exciting project. I need to convert two open-source TradingView indicators to NinjaTrader 8 and implement a usage restriction based on computer IDs. If you have experience with NinjaTrader 8 coding please let me know. I’d be happy to discuss the details further
Greetings great developer, I am in search of a highly skilled MQL5 developer to assist with an exciting project. I need to convert two open-source TradingView indicators to NinjaTrader 8 and implement a usage restriction based on computer IDs. If you have experience with NinjaTrader 8 coding please let me know. I’d be happy to discuss the details further
Hi, I need a robot, which wil get instructions to trade in 3 symbols at the same time based on few parameters and calculations. Example: There is 1 symbol called Gold-Near and the rate for it is 1000-1002 If i specify that when the rate reaches 1050, it should sell 1 lot Upon execution it will have to sell 1 lot of cme gold, buy 3 lots of mcx gold and buy currently (lots will be based on calculation). All the

Información sobre el proyecto

Presupuesto
30 - 100 USD
Para el ejecutor
27 - 90 USD