Freelance service at MQL5.com: Covert trading view indi Pine script to MT5/MQL5 EA.

Description

Specification

Hello i want to covert trading view indi Pine script to MT5/MQL5 EA.

Please tell me if you can do asap.

bellow is my source code:

//@version=5

indicator("V1.1.1 SQZMOM - CM_Ult và VFI", shorttitle="V1.1.1 SQZ-CM.Ult-VFI (SSG)", overlay=true)

// Điều kiện: 3 nến liên tiếp có xu hướng tăng

//cond = (close > open) and (close[1] > open[1]) and (close[2] > open[2])

// Tính toán độ dài của râu cho nến hiện tại

wick_length = high - math.max(open, close) // Râu trên nen hien tai

tail_length = math.min(open, close) - low // Râu dưới nen hien tai

body_length = math.abs(close - open) // Tính toán độ dài của thân nến hien tai

bhasWick = wick_length > 0 and tail_length > 0 // true neu co ca 2 rau

has_tail = tail_length > 0 // co rau duoi

has_wick = wick_length > 0 // co rau tren

wick_length1 = high[1] - math.max(open[1], close[1]) // Râu trên nen 1

tail_length1 = math.min(open[1], close[1]) - low[1] // Râu dưới nen 1

body_length1 = math.abs(close[1] - open[1]) // Tính toán độ dài của thân nến 1

has_tail1 = tail_length1 > 0 // co rau duoi

has_wick1 = wick_length1 > 0 // co rau tren

wick_length2 = high[2] - math.max(open[2], close[2]) // Râu trên nen 1

tail_length2 = math.min(open[2], close[2]) - low[2] // Râu dưới nen 1

body_length2 = math.abs(close[2] - open[2]) // Tính toán độ dài của thân nến 1

has_tail2 = tail_length2 > 0 // co rau duoi

has_wick2 = wick_length2 > 0 // co rau tren

condUp = (close > open) and (not has_tail) and (close[1] > open[1]) and (close[2] > open[2])

condDown = (close < open) and (not has_wick) and (close[1] < open[1]) and (close[2] < open[2])

condUpAll = (close > open) and (not has_tail) and (close[1] > open[1]) and (not has_tail1) and (close[2] > open[2]) and (not has_tail2)

condDownAll = (close < open) and (not has_wick) and (close[1] < open[1]) and (not has_wick1) and (close[2] < open[2]) and (not has_wick2)

bCheckABS = input(false, title="Kiểm tra giá trị tuyệt đối nến trước")

// tich hop de them dieu kien check theo SQZMOM

//------------BEGIN- SQZMOM-----------------------

length = input(20, title="BB Length")

mult = input(2.0,title="BB MultFactor")

lengthKC=input(20, title="KC Length")

multKC = input(1.5, title="KC MultFactor")

useTrueRange = input(true, title="Use TrueRange (KC)")

// Calculate BB

source = close

basis = ta.sma(source, length)

dev = multKC * ta.stdev(source, length)

upperBB = basis + dev

lowerBB = basis - dev

// Calculate KC

ma = ta.sma(source, lengthKC)

myRange = useTrueRange ? ta.tr : (high - low)

rangema = ta.sma(myRange , lengthKC)

upperKC = ma + rangema * multKC

lowerKC = ma - rangema * multKC

sqzOn = (lowerBB > lowerKC) and (upperBB < upperKC)

sqzOff = (lowerBB < lowerKC) and (upperBB > upperKC)

noSqz = (sqzOn == false) and (sqzOff == false)

val = ta.linreg(source - math.avg(math.avg(ta.highest(high, lengthKC), ta.lowest(low, lengthKC)),ta.sma(close,lengthKC)), lengthKC,0)

//bcolor = iff( val > 0, iff( val > nz(val[1]), color.lime, color.green), iff( val < nz(val[1]), color.red, color.maroon))

bcolor = ( val > 0 ? ( val > nz(val[1])? color.lime: color.green): ( val < nz(val[1])? color.red : color.maroon))

scolor = noSqz ? color.blue : sqzOn ? color.black : color.gray

// nến hiện tại không râu

condUpSQZ = (val > 0)

condDownSQZ = (val < 0)

bCandleUp = (body_length > body_length1) and (close > open) and (close[1] > open[1])

bCandleDown = (body_length > body_length1) and (close < open) and (close[1] < open[1])

// end dieu kien than nen

// ---------kiem tra them dieu kien vơi chi so CM -Ult

ource = close

useCurrentRes = input(true, title="Use Current Chart Resolution?")

resCustom = input("60", title="Use Different Timeframe? Uncheck Box Above")

//resCustom = input(title="Use Different Timeframe? Uncheck Box Above", type=resolution, defval="60")

smd = input(true, title="Show MacD & Signal Line? Also Turn Off Dots Below")

sd = input(true, title="Show Dots When MacD Crosses Signal Line?")

sh = input(true, title="Show Histogram?")

macd_colorChange = input(true,title="Change MacD Line Color-Signal Line Cross?")

hist_colorChange = input(true,title="MacD Histogram 4 Colors?")

// Determine the current chart's resolution

currentResolution = timeframe.period

// Use the custom resolution if specified, or use the current chart's resolution

selectedResolution = na(resCustom) ? currentResolution : resCustom

res = useCurrentRes ? timeframe.period : resCustom

fastLength = input.int(12, minval=1)

slowLength=input.int(26,minval=1)

signalLength=input.int(9,minval=1)

fastMA = ta.ema(source, fastLength)

slowMA = ta.ema(source, slowLength)

macd = fastMA - slowMA

signal = ta.sma(macd, signalLength)

hist = macd - signal

outMacD = request.security(syminfo.tickerid, res, macd)

outSignal = request.security(syminfo.tickerid, res, signal)

outHist = request.security(syminfo.tickerid, res, hist)

histA_IsUp = outHist > outHist[1] and outHist > 0

histA_IsDown = outHist < outHist[1] and outHist > 0

histB_IsDown = outHist < outHist[1] and outHist <= 0

histB_IsUp = outHist > outHist[1] and outHist <= 0

//MacD Color Definitions

macd_IsAbove = outMacD >= outSignal

macd_IsBelow = outMacD < outSignal

// bổ sung thêm điều kiện tuyệt đối

bspan = true

if bCheckABS

bspan := (outMacD != outSignal) and (math.abs(outMacD -outSignal) > math.abs(outMacD[1] -outSignal[1]))

macd_IsAbove := macd_IsAbove and bspan

macd_IsBelow := macd_IsBelow and bspan

// end điều kiện

condUpSQZ_CM_Ult = condUpSQZ and macd_IsAbove

condDownSQZ_CM_Ult = condDownSQZ and macd_IsBelow

//---

// ---- --begin tich hop them dieu kien kiem tra VFI

lengthVFI = input(130, title="VFI length")

coef = input(0.2)

vcoef = input(2.5, title="Max. vol. cutoff")

signalLengthVFI=input(5)

smoothVFI=input(false)

ma(x,y) => smoothVFI ? ta.sma(x,y) : x

typical=hlc3

inter = math.log( typical ) - math.log( typical[1] )

vinter = ta.stdev(inter, 30 )

cutoff = coef * vinter * close

vave = ta.sma( volume, lengthVFI )[1]

vmax = vave * vcoef

vc = (volume < vmax ? volume :vmax) //min( volume, vmax )

mf = typical - typical[1]

vcp = ( mf > cutoff ? vc : ( mf < -cutoff ? -vc :0))

vfi = ma(math.sum( vcp , lengthVFI )/vave, 3)

vfima=ta.ema( vfi, signalLengthVFI )

d=vfi-vfima

// them dieu kien tuyet doi để dự đoán xu hướng 2 đường đang tách nhau ra xa

spanvfi = true

if bCheckABS

spanvfi := (vfi != vfima) and (math.abs(d) > math.abs(vfi[1] -vfima[1]))

// end dieu kien tuyet doi

condDown_VFI = (d < 0) and spanvfi

condUp_VFI = (d >=0) and spanvfi

// -------------------end kiem tra VFI

// ket hop cac điều kiện

condUpSQZ_CM_VFI = condUpSQZ_CM_Ult and condUp_VFI and bCandleUp

condDownSQZ_CM_VFI = condDownSQZ_CM_Ult and condDown_VFI and bCandleDown

//Dừng lệnh BUY hoặc SELL

bstop = (((close > open) and (close[1] > open[1]) and (has_tail)) or ((close < open) and (close[1] < open[1]) and (has_wick))) //or body_length < 0.333 * body_length1

// end test

plotshape(condUpSQZ_CM_VFI, style=shape.triangleup, title="BUY WITH SQZMOM vs CM_Ult vs VFI", location=location.bottom , color=color.purple,size=size.tiny)

alertcondition(condUpSQZ_CM_VFI, title="BUY WITH SSG SQZMOM And CM_Ult vs VFI", message="Xu hướng tăng & SQZMOM & CM_Ult vs VFI")

plotshape(condDownSQZ_CM_VFI, style=shape.triangledown, title="SELL WITH SQZMOM vs CM_Ult vs VFI", location=location.bottom, color=color.purple, size=size.tiny)

alertcondition(condDownSQZ_CM_VFI, title="SELL WITH SQZMOM And CM_Ult vs VFI", message="Xu hướng giảm & SQZMOM & CM_Ult vs VFI")

plotshape(bstop, style=shape.xcross, title="STOP ALL 2.0", location=location.abovebar, color=color.red, size=size.tiny)

Responded

Rating

(73)

Projects

56%

Arbitration

Overdue

Free

Rating

(2)

Projects

Arbitration

0% / 100%

Overdue

Free

Rating

(126)

Projects

160

36%

Arbitration

25% / 50%

Overdue

Free

Similar orders

I am looking to develop an automated trading bot based on a strategy involving the crossing of four Simple Moving Averages (SMA). The bot should be capable of entering trades based on this strategy. Additionally, I would like to incorporate some custom diversions tailored for NinjaTrader

Seeking an experienced MQL5 developer to create a sophisticated Expert Advisor focused on harmonic pattern trading . The EA will be designed to identify and trade based on popular harmonic patterns in the forex market. Entry and Exit Logic: Develop smart entry and exit rules based on pattern completions and price action confirmations. Risk Management: Incorporate adjustable risk-per-trade settings and position sizing

preciso de um robô com duas médias móveis, uma exponencial high e uma exponencial low. preciso também ter a opção de utilizar e todos os tempos gráficos e alterar os parâmetros das médias. entrada de compra será feita quando um candle de alta romper e fechar a cima da média high e fechará a posição quando um candle de baixa romper e fechar a baixo da média low. a venda será feita quando o candle de baixa romper e

Description - An expert advisor(s), placing sell trades in EUR/USD, based on the close price of the previous two candles, as shown in the figure below. The trades would be made in the 5 minute, 1 hour, and 1 day timeframes. In the 5 minute and 1 hour timeframes the market orders would be placed at the start of a new candle, at specific times EST. The order would be cancelled at the close of that candle, i.e after 5

Hi, I have an indicator from my friend, I want to copy it to my own Traidingview or MT5 can you do that for me. Here is the link

Develop a simple trading robot from rainbow oscillator Additional features Include timeframe specification in rainbow oscillator trailing features moving average filter TP (true/false) SL (true/false) Fixed lot Risk percentage Percentage profit lock

Hi, I have an indicator from my friend, I want to copy it to my own Traidingview or MT5 can you do that for me. Here is the link

I need a dashboard that shows my various accounts that shows balance, equity, number of trades open, drawdown and some more information. I want to use it to monitor my accounts in one screen or chart. If there is anyone who can do it please show me the screenshot of your sample

Hi, I need a robot, which wil get instructions to trade in 3 symbols at the same time based on few parameters and calculations. Example: There is 1 symbol called Gold-Near and the rate for it is 1000-1002 If i specify that when the rate reaches 1050, it should sell 1 lot Upon execution it will have to sell 1 lot of cme gold, buy 3 lots of mcx gold and buy currently (lots will be based on calculation). All the

We need bot that trades when medium and low impact news hits It will release pending order both directions few min prior to news impact And will have certain risk management strategy attached Example If Monday and Tuesday news successful clears profits It will reduce risk for next news events until new week starts each week message on tg: Dstatewealthtrading NOTE: 4 YAERS OF EXPERIENCE UPWORD, YOU MUST BE A

Project information

Budget

30 - 100 USD

For the developer

27 - 90 USD

Specification quality
Result check quality
Availability and communication skills