MQL5.comでのフリーランスサービス: Covert trading view indi Pine script to MT5/MQL5 EA.

説明

指定

Hello i want to covert trading view indi Pine script to MT5/MQL5 EA.

Please tell me if you can do asap.

bellow is my source code:

//@version=5

indicator("V1.1.1 SQZMOM - CM_Ult và VFI", shorttitle="V1.1.1 SQZ-CM.Ult-VFI (SSG)", overlay=true)

// Điều kiện: 3 nến liên tiếp có xu hướng tăng

//cond = (close > open) and (close[1] > open[1]) and (close[2] > open[2])

// Tính toán độ dài của râu cho nến hiện tại

wick_length = high - math.max(open, close) // Râu trên nen hien tai

tail_length = math.min(open, close) - low // Râu dưới nen hien tai

body_length = math.abs(close - open) // Tính toán độ dài của thân nến hien tai

bhasWick = wick_length > 0 and tail_length > 0 // true neu co ca 2 rau

has_tail = tail_length > 0 // co rau duoi

has_wick = wick_length > 0 // co rau tren

wick_length1 = high[1] - math.max(open[1], close[1]) // Râu trên nen 1

tail_length1 = math.min(open[1], close[1]) - low[1] // Râu dưới nen 1

body_length1 = math.abs(close[1] - open[1]) // Tính toán độ dài của thân nến 1

has_tail1 = tail_length1 > 0 // co rau duoi

has_wick1 = wick_length1 > 0 // co rau tren

wick_length2 = high[2] - math.max(open[2], close[2]) // Râu trên nen 1

tail_length2 = math.min(open[2], close[2]) - low[2] // Râu dưới nen 1

body_length2 = math.abs(close[2] - open[2]) // Tính toán độ dài của thân nến 1

has_tail2 = tail_length2 > 0 // co rau duoi

has_wick2 = wick_length2 > 0 // co rau tren

condUp = (close > open) and (not has_tail) and (close[1] > open[1]) and (close[2] > open[2])

condDown = (close < open) and (not has_wick) and (close[1] < open[1]) and (close[2] < open[2])

condUpAll = (close > open) and (not has_tail) and (close[1] > open[1]) and (not has_tail1) and (close[2] > open[2]) and (not has_tail2)

condDownAll = (close < open) and (not has_wick) and (close[1] < open[1]) and (not has_wick1) and (close[2] < open[2]) and (not has_wick2)

bCheckABS = input(false, title="Kiểm tra giá trị tuyệt đối nến trước")

// tich hop de them dieu kien check theo SQZMOM

//------------BEGIN- SQZMOM-----------------------

length = input(20, title="BB Length")

mult = input(2.0,title="BB MultFactor")

lengthKC=input(20, title="KC Length")

multKC = input(1.5, title="KC MultFactor")

useTrueRange = input(true, title="Use TrueRange (KC)")

// Calculate BB

source = close

basis = ta.sma(source, length)

dev = multKC * ta.stdev(source, length)

upperBB = basis + dev

lowerBB = basis - dev

// Calculate KC

ma = ta.sma(source, lengthKC)

myRange = useTrueRange ? ta.tr : (high - low)

rangema = ta.sma(myRange , lengthKC)

upperKC = ma + rangema * multKC

lowerKC = ma - rangema * multKC

sqzOn = (lowerBB > lowerKC) and (upperBB < upperKC)

sqzOff = (lowerBB < lowerKC) and (upperBB > upperKC)

noSqz = (sqzOn == false) and (sqzOff == false)

val = ta.linreg(source - math.avg(math.avg(ta.highest(high, lengthKC), ta.lowest(low, lengthKC)),ta.sma(close,lengthKC)), lengthKC,0)

//bcolor = iff( val > 0, iff( val > nz(val[1]), color.lime, color.green), iff( val < nz(val[1]), color.red, color.maroon))

bcolor = ( val > 0 ? ( val > nz(val[1])? color.lime: color.green): ( val < nz(val[1])? color.red : color.maroon))

scolor = noSqz ? color.blue : sqzOn ? color.black : color.gray

// nến hiện tại không râu

condUpSQZ = (val > 0)

condDownSQZ = (val < 0)

bCandleUp = (body_length > body_length1) and (close > open) and (close[1] > open[1])

bCandleDown = (body_length > body_length1) and (close < open) and (close[1] < open[1])

// end dieu kien than nen

// ---------kiem tra them dieu kien vơi chi so CM -Ult

ource = close

useCurrentRes = input(true, title="Use Current Chart Resolution?")

resCustom = input("60", title="Use Different Timeframe? Uncheck Box Above")

//resCustom = input(title="Use Different Timeframe? Uncheck Box Above", type=resolution, defval="60")

smd = input(true, title="Show MacD & Signal Line? Also Turn Off Dots Below")

sd = input(true, title="Show Dots When MacD Crosses Signal Line?")

sh = input(true, title="Show Histogram?")

macd_colorChange = input(true,title="Change MacD Line Color-Signal Line Cross?")

hist_colorChange = input(true,title="MacD Histogram 4 Colors?")

// Determine the current chart's resolution

currentResolution = timeframe.period

// Use the custom resolution if specified, or use the current chart's resolution

selectedResolution = na(resCustom) ? currentResolution : resCustom

res = useCurrentRes ? timeframe.period : resCustom

fastLength = input.int(12, minval=1)

slowLength=input.int(26,minval=1)

signalLength=input.int(9,minval=1)

fastMA = ta.ema(source, fastLength)

slowMA = ta.ema(source, slowLength)

macd = fastMA - slowMA

signal = ta.sma(macd, signalLength)

hist = macd - signal

outMacD = request.security(syminfo.tickerid, res, macd)

outSignal = request.security(syminfo.tickerid, res, signal)

outHist = request.security(syminfo.tickerid, res, hist)

histA_IsUp = outHist > outHist[1] and outHist > 0

histA_IsDown = outHist < outHist[1] and outHist > 0

histB_IsDown = outHist < outHist[1] and outHist <= 0

histB_IsUp = outHist > outHist[1] and outHist <= 0

//MacD Color Definitions

macd_IsAbove = outMacD >= outSignal

macd_IsBelow = outMacD < outSignal

// bổ sung thêm điều kiện tuyệt đối

bspan = true

if bCheckABS

bspan := (outMacD != outSignal) and (math.abs(outMacD -outSignal) > math.abs(outMacD[1] -outSignal[1]))

macd_IsAbove := macd_IsAbove and bspan

macd_IsBelow := macd_IsBelow and bspan

// end điều kiện

condUpSQZ_CM_Ult = condUpSQZ and macd_IsAbove

condDownSQZ_CM_Ult = condDownSQZ and macd_IsBelow

//---

// ---- --begin tich hop them dieu kien kiem tra VFI

lengthVFI = input(130, title="VFI length")

coef = input(0.2)

vcoef = input(2.5, title="Max. vol. cutoff")

signalLengthVFI=input(5)

smoothVFI=input(false)

ma(x,y) => smoothVFI ? ta.sma(x,y) : x

typical=hlc3

inter = math.log( typical ) - math.log( typical[1] )

vinter = ta.stdev(inter, 30 )

cutoff = coef * vinter * close

vave = ta.sma( volume, lengthVFI )[1]

vmax = vave * vcoef

vc = (volume < vmax ? volume :vmax) //min( volume, vmax )

mf = typical - typical[1]

vcp = ( mf > cutoff ? vc : ( mf < -cutoff ? -vc :0))

vfi = ma(math.sum( vcp , lengthVFI )/vave, 3)

vfima=ta.ema( vfi, signalLengthVFI )

d=vfi-vfima

// them dieu kien tuyet doi để dự đoán xu hướng 2 đường đang tách nhau ra xa

spanvfi = true

if bCheckABS

spanvfi := (vfi != vfima) and (math.abs(d) > math.abs(vfi[1] -vfima[1]))

// end dieu kien tuyet doi

condDown_VFI = (d < 0) and spanvfi

condUp_VFI = (d >=0) and spanvfi

// -------------------end kiem tra VFI

// ket hop cac điều kiện

condUpSQZ_CM_VFI = condUpSQZ_CM_Ult and condUp_VFI and bCandleUp

condDownSQZ_CM_VFI = condDownSQZ_CM_Ult and condDown_VFI and bCandleDown

//Dừng lệnh BUY hoặc SELL

bstop = (((close > open) and (close[1] > open[1]) and (has_tail)) or ((close < open) and (close[1] < open[1]) and (has_wick))) //or body_length < 0.333 * body_length1

// end test

plotshape(condUpSQZ_CM_VFI, style=shape.triangleup, title="BUY WITH SQZMOM vs CM_Ult vs VFI", location=location.bottom , color=color.purple,size=size.tiny)

alertcondition(condUpSQZ_CM_VFI, title="BUY WITH SSG SQZMOM And CM_Ult vs VFI", message="Xu hướng tăng & SQZMOM & CM_Ult vs VFI")

plotshape(condDownSQZ_CM_VFI, style=shape.triangledown, title="SELL WITH SQZMOM vs CM_Ult vs VFI", location=location.bottom, color=color.purple, size=size.tiny)

alertcondition(condDownSQZ_CM_VFI, title="SELL WITH SQZMOM And CM_Ult vs VFI", message="Xu hướng giảm & SQZMOM & CM_Ult vs VFI")

plotshape(bstop, style=shape.xcross, title="STOP ALL 2.0", location=location.abovebar, color=color.red, size=size.tiny)

応答済み

評価

(96)

プロジェクト

107

57%

仲裁

期限切れ

暇

評価

(2)

プロジェクト

仲裁

0% / 100%

期限切れ

暇

評価

(131)

プロジェクト

173

39%

仲裁

25% / 50%

期限切れ

仕事中

類似した注文

I am looking for a professional and experienced developer to assist me with a project involving the conversion of a MetaTrader 4 (MT4) indicator to TradingView (TV) format. If you have the necessary skills and are interested in collaborating, please reach out with your portfolio and any relevant experience. I’m eager to discuss this project in more detail

It is using EMA/SMA for triggers of long or short (green long/red short) and the line above or below is the stop loss, profit triggers would need to figure out or allow it until next trigger. Already in thinkscript And add parameters

I have been using Tradingview for a few years and have now found an MT5 strategy (scalper for forex markets) that I would like to have converted into a Pine code. The strategy should be able to output the corresponding signals on Tradingview and also be usable in the Strategy Tester for backtesting. I am enclosing the relevant MT5 code, although I do not know whether it is error-free. Please note the following

A “grid” display style like the attached image. User can choose up to 3 EMA’s to monitor on up to 6 Time Frames. If the EMA slope is greater than 0 = Green If the EMA slope is less than 0 = Red If the EMA slope is 0 = Black The grid should be customizable on it’s size, colors, and placement on the chart. Each EMA should update per tick. A label at the top of the grid should read “SLOPES” Indicator 2: A “grid” display

Requirement: 1. Convert Pivot source code .mq4 to Sierra Chart mq4 source code is provided .mq4 as attached .mq4 2. upon conversion to add a button code on Sierra chart .cpp to allow display/hide the pivot line in Sierra Chart ---- *no need alert, make it light without any alert, just a button to display/hide pivot line will do :) to continue, pivot font text also no need I"ve mark with red cross to remove see

I have 2 (indicators) I coded and I use on Tradingview I just need converted to use on Ninjatrader i will be looking for great developer to bid for it and for more details

I've use most of code from this script, add some more filter, and added different kind of moving avg instead of rsi input .. please check the source code .. . 70-80% is similar to it. Please check can you convert And are you familiar with backtest.py library? Oky. This library has ML approach to get the optimized backtest parameters right ? included for this but let me know what you think? can you install backtest.py

i am looking for somebody how can convert my pine script code into an MT5 EA. Are you able to do it? Find the pine script code attached. Kindly send a message if you can do this and let me know the time frame and budget. Thanks

Hello developers, I would like to hire someone can convert the Radar Signal indicator: https://www.youtube.com/watch?v=5DmKcy7rb-U&nbsp ; to it's TradingView equivalent. Radar signal indicator is the combination of 7 classic MT4 indicators. They include ADX, RSI , CCI , OsMA, ATR, WPR. The indicator shows the values of these indicators in blue and red. Red color indicates a bearish market condition and the blue shows

Greetings to all developers that see this post, I have a task, I would like to work with an expert. I have an indicator that is written in the Pine script (TradingView) language; I would like it converted to MQL5, which will then lead to the creation of a trading bot based on the circumstances. I'll give you access to the indicator file

プロジェクト情報

予算

30 - 100 USD

開発者用

27 - 90 USD

仕様品質
結果チェックの品質
可用性とコミュニケーションスキル