All Blogs / Analytics & Forecasts / Trading Systems

Advanced Scalper Manual and presets

28 August 2017, 11:38

Wim Schrynemakers

24 025

Advanced Scalper EA manual and presets

RECOMMENDED BROKER: bit.ly/3Wd8NPs (-> open "standard" accounttype!)

For the FAQ, go here

Quick setup guide:

to install the EA:

First go to the MT4 -> tools -> options -> community -> enter your MQL5 credentials

Then go to the MT4 -> Market -> purchased -> advanced Scalper -> install

Then, to run on the charts using my recommended settings. The set files can be found attached to this post. They are a low risk setup:

- Open 4 EURUSD H1 charts -> drag the EA to each, but load each with a different EURUSD set (EURUSD_H1_SL14.set, EURUSD_H1_SL22.set, EURUSD_H1_SL17.set and EURUSD_H1_SL18.set) (how to load a set file explained below)

- Open 2 USDJPY H4 charts, drag the EA to the chart and load the 2 USDJPY H4 sets

- Open 2 USDJPY H1 charts, drag the EA to the chart and load the 2 USDJPY H1 sets

To "load" a set file: after dragging the EA to the chart, the EA's properties window will open. Go to "inputs" and click on "load". Select the set file here.

I've attached the recommended in ZIP file. extract them first.

So to be clear: after setup, you'll have a total of 8 charts open. 4 for EURUSD and 4 for USDJPY. each on runs a different setup

Here is a video showing how I set up charts and install the EA (only 4 shown here):

Many people ask about the setup from the Tickmill high growth signal. the high risk sets are attached here also

(Still not sure how to set it up? I can set it up on your VPS for you!)

Files:

adv_scalp_low_risk_MT4.zip 10 kb

Adv_Scalp_High_Risk_MT4.zip 10 kb

Adv_Scalp_Low_Risk_MT5.zip 15 kb

adv_scalp_High_Risk_MT5.zip 15 kb

Wim Schrynemakers 2021.10.04 06:12 #61

phquijano #:

Hi Wim,

I'm trying to test your EA, but rely don't know if I'm doing something wrong.

I followed all your instructions, load the setting, but nothing. Every time I run the test do nothing and receive the following message:

2021.10.03 19:45:12.508 2021.09.01 00:00:00 Advanced Scalper USDJPY,H1: global initialization failed

then...

2021.10.03 19:45:12.508 USDJPY,H1: 1 tick events (0 bars, 985800 bar states) processed in 0:01:33.531 (total time 0:01:51.281)

First time that I test a EA bot and to receive that message.

I have done this in my IC Market and DarwinEx accounts, getting the same message.

Hope you can help me with this.

Best regards

Hi,

make sure you are running the latest version of the MT4/MT5 terminal

try removing the EA from the MT4/MT5 and reinstall it again

try restarting the MT4/MT5

anonymous5_0 2021.10.06 14:46 #62

Hello, I have just bought the product but the high risk setting seems to be wrong:

GBPUSD_H1_SL10 uses fixedlot 0.01 ( Do I need to change for lotperbalance_step with step 70 ?)

EURUSD_H1_SL14 does not seem to work (I mean it did not create any pending orders)

EURUSD_H1_SL50 uses lotsperbalance_step = 30 ( do I need to change for 70)

USDJPY_H1_SL22 uses fixedlot 0.01 ( Do I need to change for lotperbalance_step with step 70 ?)

Wim Schrynemakers #:

SET FILES FROM MY HIGH GROWTH TICKMILL SIGNAL

(these are high risk sets!)

Wim Schrynemakers 2021.10.29 18:14 #63

Jun Liang Lu #:

我使用MT5 MetaQuotes平台基于实时点回2014-12-16 - - - - - 2014-12-17总是爆仓，流动特别大，EA点开差仓，解决方案是什么？

I use MT5 MetaQuotes platform based on real-time point back to test the 2014-12-16 -- -- -- -- -- - the 2014-12-17 always blowing up, point difference fluctuation particularly big, EA repeatedly open positions, what is the solution?

run on lower risk?

DaElio 2021.11.02 12:36 #64

You wrote:
"There is also 1 set for XAUUSD attached, but that is still in testing and not recommended to run at big lots for now"

Is it still testing?

And what about the zip-file? I can see only the single set up files.

Samuel Agustina 2021.11.04 09:18 #65

Hi Wim,

Do you have the set file for XAUUSD ?

Did you try other pairs ?

Alexis Tormo 2021.11.19 17:42 #66

Is the GBP/USD pair set available?

thanks

80652416 Adhy 2021.12.01 18:55 #67

Wim Schrynemakers #:

explained in the manual (attached)

Also attached is an example set file for manual trade follow up

pochun12 2021.12.22 06:30 #68

Hi,I did not see the set for xauusd,

Can you let me know where it is?

Thank you!

1800computers 2022.04.11 13:13 #69

Hi mate, thanks for the app, it's working well but I have 1 major issue. Some open orders come up as double or tripple. So when a trade hits and if it's double or triple there, I get the same order oepened 2 or 3 times. Recently EURUSD Opened 2022/04/07 16:33 BUY 1.09383 it was a loss, and it did it 3 times at the same time. How can I avoid this or why is this happening? Thanks

Sergey Komarovsky 2022.05.12 15:39 #70

please tell me, does your EA use 4-digit or 5-digit for calculating quotes? how can he indent 0.5 pips or filter the spread by 3 pips if the average spread is 5p by 5 digits?

Wim Schrynemakers 2022.05.12 15:43 #71

Sergey Komarovsky #:
please tell me, does your EA use 4-digit or 5-digit for calculating quotes? how can he indent 0.5 pips or filter the spread by 3 pips if the average spread is 5p by 5 digits?

ideally is 5 digits (most brokers have this). But it also works on 4 digit brokers.

5point (0.5pips) is surely good enough

Sergey Komarovsky 2022.05.12 16:06 #72

Wim Schrynemakers #:

ideally is 5 digits (most brokers have this). But it also works on 4 digit brokers.

5point (0.5pips) is surely good enough

So, if the spread filter is set to 3 in the adviser's settings, then this means 30 points five-digit 0.00030, right?

Wim Schrynemakers 2022.05.12 16:08 #73

Sergey Komarovsky #:

So, if the spread filter is set to 3 in the adviser's settings, then this means 30 points five-digit 0.00030, right?

yes, the spread is set in pips, not points

Sergey Komarovsky 2022.05.12 16:12 #74

Sergey Komarovsky #:

So, if the spread filter is set to 3 in the adviser's settings, then this means 30 points five-digit 0.00030, right?

if so, is it correct for accounts with large spreads to adjust the settings and add the true spread value for my account to the values in the settings? For example, if the value in the stop loss settings is 1p and my spread is 25 points (=2.5 pips), then I need to set the value in the settings to SL=2.5 instead of SL=1, right?

I understand that after that you need to check in the tester and the results will differ significantly from yours, and it's better to use ecn =)

Sergey Komarovsky 2022.05.12 16:13 #75

Wim Schrynemakers #:

yes, the spread is set in pips, not points

thx =)

Sergey Komarovsky 2022.05.12 16:24 #76

Wim Schrynemakers #:

yes, the spread is set in pips, not points

I understand that after that you need to check in the tester and the results will differ significantly from yours, and it's better to use ecn =)

Wim Schrynemakers 2022.05.12 17:47 #77

Sergey Komarovsky #:

I understand that after that you need to check in the tester and the results will differ significantly from yours, and it's better to use ecn =)

in theory yes, but those kind of spread (2.5pips for EURUSD) won't be profitable I think

Stevanus 2022.06.11 05:11 #78

Wim Schrynemakers # :

Setel file untuk MT4 semua terpisah, bagi mereka yang mengalami masalah saat mengekstrak file zip

halo wim, mengapa trailing stop untuk pasangan GBPUSD saya tidak berfungsi? minggu ini untuk pair GBPUSD saya sering mendapatkan cut loss, padahal keadaan harusnya sering breakout hingga 5pips, tapi trailing stop tidak berfungsi, sehingga market reversal dan terkena stoploss 10pips. Apakah ada perngaturan preset yang salah? Ataukah saya harus membuka beberapa MT4 untuk masing masing pair?

Files:

Screenshot_20220611_120727.jpg 492 kb