EA Stepper
- Experten
- Joseph B Antonacci
- Version: 3.0
- Aktualisiert: 2 Oktober 2020
Ea Stepper ist ein vollautomatischer Expert Advisor für die mt4-Plattform, der für kurz-, mittel- und langfristige Strategien verwendet werden kann. Die Strategie besteht darin, nach Perioden mit sehr geringer Volatilität zu suchen, um Einträge in Richtung des täglichen Trends zu platzieren. Wenn sich die Richtung des Trends ändert und sich ein offener Deal als unrentabel herausstellt, wird ein Deal mit einem erhöhten Los in die entgegengesetzte Richtung eröffnet.
DIE ANGEBOTENEN BEDINGUNGEN:
ECN-Konto mit möglichst geringen Spreads und Provisionen
Hebelwirkung des Sicherungskontos 500: 1
VPS angeboten
Es wird eine Mindesteinzahlung von 1000 USD angeboten (kann mit weniger verwendet werden)
EINGABEPARAMETER (es wird empfohlen, zuerst die Parameter IN_ALL_CAPITALS zu optimieren):
MaxLotSize: Die maximale Lotgröße für den Handel kann von der maximalen Lotgröße des Brokers getrennt werden.
MaxSpread: Wird nicht mit Pips gehandelt, wenn der Spread höher ist. Es wird dringend empfohlen, diesen Wert auf den angegebenen durchschnittlichen Spread Ihres Brokers festzulegen.
AutoLot: Automatische Skalierung der Losgröße entsprechend der Kontogröße.
AutoLotMargin: Betrag zur Berechnung von AutoLot.
InitialLot: Losgröße für die Menge an AutoLotMargin. Beispiel: InitialLot = 0,01, AutoLotMargin beträgt 500 USD und Kontostand 1500 USD, nicht skalierte Handelsgröße = 0,03 Lose.
SCALEDLOT_TRADES: Die Anzahl der aufeinanderfolgenden gewinnenden Trades, die skaliert werden sollen. Skalierungsberechnung - aktuelle Losgröße + anfängliches Los * aufeinanderfolgende Gewinne bis zum variablen Wert. 0 deaktiviert die Skalierung.
MaxOpenTrades: Die Gesamtzahl der gleichzeitig geöffneten Trades.
RESTART_BY_EQUITY%: Setzt die Methode zur Berechnung der Anzahl der Trades zurück, die durch aufeinanderfolgende Gewinne skaliert werden sollen. Hilft das Risiko zu kontrollieren.
EQUITY_DRAWDOWN_SL%: SOFT-Stop-Loss auf Eigenkapital. Der Prozentsatz der Mittel auf dem Konto zum Zeitpunkt der Platzierung eines Handels unter Berücksichtigung der Inanspruchnahme vor Handelsschluss. Der Handel wird beim nächsten Signal fortgesetzt. Es wird hauptsächlich verwendet, um das Risiko von Trades mit einem großen Los oder als virtueller SL zu steuern. Startet auch die sequentielle Skalierung von Gewinnen neu.
Hard_Equity_Sl%: Beendet den Handel nach Erreichen dieses absoluten Drawdowns.
HardEquityStopLossMode: Verwenden Sie den absoluten oder relativen Drawdown für Hard_Equity_SL%
Profit_Target%: Gewünschter Gewinnprozentsatz vor der Aktion. Kann ausgeschaltet oder neu gestartet werden.
RestartOnTarget: Wenn True, setzt der EA den Handel fort, erhöht jedoch den Mindestbetrag auf dem Konto im absoluten Modus um Profit_Target%.
SLTimeframe: ATR-Zeitrahmen zum Festlegen des Stop-Loss-Levels.
TP_TIMEFRAME: ATR-Zeitintervall zum Einstellen der Take Profit-Stufe.
TSPoints: Punkte, nach denen BE Trail Stop für Wiederherstellungsgeschäfte verwendet werden sollte. 0 = deaktiviert
RecoveryDirection: Legt fest, ob ein skalierbarer Lot-Handel gegen die Preisrichtung mit oder mit beiden (bidirektional) platziert werden soll. Für diesen Parameter ist ein Absicherungskonto erforderlich. Andernfalls sollte die Option "Gegen" ausgewählt werden. AUS zum Deaktivieren.
LotScale: InitialLot-Multiplikator, wenn der Wiederherstellungsmechanismus ausgelöst wird.
TREND_TIMEFRAME: Legt den Zeitrahmen für den Haupttrendindikator fest.
ATR_CALCULATION: Welche Berechnung verwendet werden soll, um den Holdover des ATR-Aufzeichnungsschwellenwerts festzulegen.
ATR_MA_PERIOD: Zeitraum zur Berechnung des gleitenden ATR-Durchschnitts.
ATRTimeFrame1: Zeitrahmen für den 1. ATR-Indikator.
ATRperiod1: Zeitraum für den 1. ATR-Indikator.
ATRTimeFrame2: Zeitrahmen für den 2. ATR-Indikator.
ATRperiod2: Zeitraum für den 2. ATR-Indikator.
DEMARKER_ENTRY: Gibt an, ob der RSI-Filter für die Eingabe verwendet werden soll
DEMARKER_MA_PERIOD: Periode für RSI-Filter.
DeMarkerTimeFrame: Zeitrahmen für den Demarker-Indikator
DeMarkerPeriod: Zeitraum für den RSI-Eintragsindikator.
DIE ANGEBOTENEN BEDINGUNGEN:
ECN-Konto mit möglichst geringen Spreads und Provisionen
Hebelwirkung des Sicherungskontos 500: 1
VPS angeboten
Es wird eine Mindesteinzahlung von 1000 USD angeboten (kann mit weniger verwendet werden)
EINGABEPARAMETER (es wird empfohlen, zuerst die Parameter IN_ALL_CAPITALS zu optimieren):
MaxLotSize: Die maximale Lotgröße für den Handel kann von der maximalen Lotgröße des Brokers getrennt werden.
MaxSpread: Wird nicht mit Pips gehandelt, wenn der Spread höher ist. Es wird dringend empfohlen, diesen Wert auf den angegebenen durchschnittlichen Spread Ihres Brokers festzulegen.
AutoLot: Automatische Skalierung der Losgröße entsprechend der Kontogröße.
AutoLotMargin: Betrag zur Berechnung von AutoLot.
InitialLot: Losgröße für die Menge an AutoLotMargin. Beispiel: InitialLot = 0,01, AutoLotMargin beträgt 500 USD und Kontostand 1500 USD, nicht skalierte Handelsgröße = 0,03 Lose.
SCALEDLOT_TRADES: Die Anzahl der aufeinanderfolgenden gewinnenden Trades, die skaliert werden sollen. Skalierungsberechnung - aktuelle Losgröße + anfängliches Los * aufeinanderfolgende Gewinne bis zum variablen Wert. 0 deaktiviert die Skalierung.
MaxOpenTrades: Die Gesamtzahl der gleichzeitig geöffneten Trades.
RESTART_BY_EQUITY%: Setzt die Methode zur Berechnung der Anzahl der Trades zurück, die durch aufeinanderfolgende Gewinne skaliert werden sollen. Hilft das Risiko zu kontrollieren.
EQUITY_DRAWDOWN_SL%: SOFT-Stop-Loss auf Eigenkapital. Der Prozentsatz der Mittel auf dem Konto zum Zeitpunkt der Platzierung eines Handels unter Berücksichtigung der Inanspruchnahme vor Handelsschluss. Der Handel wird beim nächsten Signal fortgesetzt. Es wird hauptsächlich verwendet, um das Risiko von Trades mit einem großen Los oder als virtueller SL zu steuern. Startet auch die sequentielle Skalierung von Gewinnen neu.
Hard_Equity_Sl%: Beendet den Handel nach Erreichen dieses absoluten Drawdowns.
HardEquityStopLossMode: Verwenden Sie den absoluten oder relativen Drawdown für Hard_Equity_SL%
Profit_Target%: Gewünschter Gewinnprozentsatz vor der Aktion. Kann ausgeschaltet oder neu gestartet werden.
RestartOnTarget: Wenn True, setzt der EA den Handel fort, erhöht jedoch den Mindestbetrag auf dem Konto im absoluten Modus um Profit_Target%.
SLTimeframe: ATR-Zeitrahmen zum Festlegen des Stop-Loss-Levels.
TP_TIMEFRAME: ATR-Zeitintervall zum Einstellen der Take Profit-Stufe.
TSPoints: Punkte, nach denen BE Trail Stop für Wiederherstellungsgeschäfte verwendet werden sollte. 0 = deaktiviert
RecoveryDirection: Legt fest, ob ein skalierbarer Lot-Handel gegen die Preisrichtung mit oder mit beiden (bidirektional) platziert werden soll. Für diesen Parameter ist ein Absicherungskonto erforderlich. Andernfalls sollte die Option "Gegen" ausgewählt werden. AUS zum Deaktivieren.
LotScale: InitialLot-Multiplikator, wenn der Wiederherstellungsmechanismus ausgelöst wird.
TREND_TIMEFRAME: Legt den Zeitrahmen für den Haupttrendindikator fest.
ATR_CALCULATION: Welche Berechnung verwendet werden soll, um den Holdover des ATR-Aufzeichnungsschwellenwerts festzulegen.
ATR_MA_PERIOD: Zeitraum zur Berechnung des gleitenden ATR-Durchschnitts.
ATRTimeFrame1: Zeitrahmen für den 1. ATR-Indikator.
ATRperiod1: Zeitraum für den 1. ATR-Indikator.
ATRTimeFrame2: Zeitrahmen für den 2. ATR-Indikator.
ATRperiod2: Zeitraum für den 2. ATR-Indikator.
DEMARKER_ENTRY: Gibt an, ob der RSI-Filter für die Eingabe verwendet werden soll
DEMARKER_MA_PERIOD: Periode für RSI-Filter.
DeMarkerTimeFrame: Zeitrahmen für den Demarker-Indikator
DeMarkerPeriod: Zeitraum für den RSI-Eintragsindikator.
just starting and very good entries. could you precise how he proceed about take profit and trailing please ?