Auftrag beendet
Spezifikation
Hello,
I have a request of modifying 1 pre-made indicator as I described here.
Firstly, take a look at below image, please.
As
you can see, there are 6 buffers in data window.
I need an extra buffer to calculate buffers as a mark point as followings below.
If there is upper mark 1, then it will
show “v7 (MarkPoint) == 1.0” in data window.
v1 1 Top 1.12345
v2 1 Bottom 0.00000
v3 2 Top 0.00000
v4
2 Bottom 0.00000
v5 3 Top 0.00000
v6 3 Bottom 0.00000
v7 MarkPoint 1.0
If there is upper mark 2, then it will show “v7 (MarkPoint) == 2.0” in data window.
v1 1 Top
1.12345
v2 1 Bottom 0.00000
v3 2 Top 1.12345
v4 2 Bottom 0.00000
v5 3
Top 0.00000
v6 3 Bottom 0.00000
v7 MarkPoint 2.0
If there is upper mark 3, then it will show “v7 (MarkPoint) == 3.0” in data window.
v1 1 Top
1.12345
v2 1 Bottom 0.00000
v3 2 Top 1.12345
v4 2 Bottom 0.00000
v5 3
Top 1.12345
v6 3 Bottom 0.00000
v7 MarkPoint 3.0
If there is lower mark 1, then it will show “v7 (MarkPoint) == -1.0” in data window.
v1 1 Top
0.00000
v2 1 Bottom 1.12345
v3 2 Top 0.00000
v4 2 Bottom 0.00000
v5 3
Top 0.00000
v6 3 Bottom 0.00000
v7 MarkPoint -1.0
If there is lower mark 2, then it will show “v7 (MarkPoint) == -2.0” in data window.
v1 1 Top
0.00000
v2 1 Bottom 1.12345
v3 2 Top 0.00000
v4 2 Bottom 1.12345
v5 3
Top 0.00000
v6 3 Bottom 0.00000
v7 MarkPoint -2.0
If there is lower mark 3, then it will show “v7 (MarkPoint) == -3.0” in data window.
v1 1 Top
0.00000
v2 1 Bottom 1.12345
v3 2 Top 0.00000
v4 2 Bottom 1.12345
v5 3
Top 0.00000
v6 3 Bottom 1.12345
v7 MarkPoint -3.0
For more details, take a look at my attached document, please.
Thanks in advance,
David