Convert Tradingview's (Pinescript) Engulfing Indicators to MQL5 for MetaTrader5 Use

Работа завершена

Время выполнения 1 день
Отзыв от заказчика
Excellent work! Perfectly done and quick.
Отзыв от исполнителя
Kind and correct customer. great!!!

Техническое задание

For bearish:

//@version=4

study("Engulfing - Bearish", shorttitle = "Engulfing - Bear", overlay=true)


C_DownTrend = true

C_UpTrend = true

var trendRule1 = "SMA50"

var trendRule2 = "SMA50, SMA200"

var trendRule = input(trendRule1, "Detect Trend Based On", options=[trendRule1, trendRule2, "No detection"])


if trendRule == trendRule1

priceAvg = sma(close, 50)

C_DownTrend := close < priceAvg

C_UpTrend := close > priceAvg


if trendRule == trendRule2

sma200 = sma(close, 200)

sma50 = sma(close, 50)

C_DownTrend := close < sma50 and sma50 < sma200

C_UpTrend := close > sma50 and sma50 > sma200

C_Len = 14 // ema depth for bodyAvg

C_ShadowPercent = 5.0 // size of shadows

C_ShadowEqualsPercent = 100.0

C_DojiBodyPercent = 5.0

C_Factor = 2.0 // shows the number of times the shadow dominates the candlestick body


C_BodyHi = max(close, open)

C_BodyLo = min(close, open)

C_Body = C_BodyHi - C_BodyLo

C_BodyAvg = ema(C_Body, C_Len)

C_SmallBody = C_Body < C_BodyAvg

C_LongBody = C_Body > C_BodyAvg

C_UpShadow = high - C_BodyHi

C_DnShadow = C_BodyLo - low

C_HasUpShadow = C_UpShadow > C_ShadowPercent / 100 * C_Body

C_HasDnShadow = C_DnShadow > C_ShadowPercent / 100 * C_Body

C_WhiteBody = open < close

C_BlackBody = open > close

C_Range = high-low

C_IsInsideBar = C_BodyHi[1] > C_BodyHi and C_BodyLo[1] < C_BodyLo

C_BodyMiddle = C_Body / 2 + C_BodyLo

C_ShadowEquals = C_UpShadow == C_DnShadow or (abs(C_UpShadow - C_DnShadow) / C_DnShadow * 100) < C_ShadowEqualsPercent and (abs(C_DnShadow - C_UpShadow) / C_UpShadow * 100) < C_ShadowEqualsPercent

C_IsDojiBody = C_Range > 0 and C_Body <= C_Range * C_DojiBodyPercent / 100

C_Doji = C_IsDojiBody and C_ShadowEquals


patternLabelPosLow = low - (atr(30) * 0.6)

patternLabelPosHigh = high + (atr(30) * 0.6)


C_EngulfingBearishNumberOfCandles = 2

C_EngulfingBearish = C_UpTrend and C_BlackBody and C_LongBody and C_WhiteBody[1] and C_SmallBody[1] and close <= open[1] and open >= close[1] and ( close < open[1] or open > close[1] )

alertcondition(C_EngulfingBearish, title = "Engulfing", message = "New Engulfing - Bearish pattern detected.")

if C_EngulfingBearish

    var ttBearishEngulfing = "Engulfing\nAt the end of a given uptrend, a reversal pattern will most likely appear. During the first day, this candlestick pattern uses a small body. It is then followed by a day where the candle body fully overtakes the body from the day before it and closes in the trend’s opposite direction. Although similar to the outside reversal chart pattern, it is not essential for this pattern to fully overtake the range (high to low), rather only the open and the close."

    label.new(bar_index, patternLabelPosHigh, text="BE", style=label.style_label_down, color = color.red, textcolor=color.white, tooltip = ttBearishEngulfing)

bgcolor(highest(C_EngulfingBearish?1:0, C_EngulfingBearishNumberOfCandles)!=0 ? color.red : na, offset=-(C_EngulfingBearishNumberOfCandles-1))



For bullish:

//@version=4

study("Engulfing - Bullish", shorttitle = "Engulfing - Bull", overlay=true)


C_DownTrend = true

C_UpTrend = true

var trendRule1 = "SMA50"

var trendRule2 = "SMA50, SMA200"

var trendRule = input(trendRule1, "Detect Trend Based On", options=[trendRule1, trendRule2, "No detection"])


if trendRule == trendRule1

priceAvg = sma(close, 50)

C_DownTrend := close < priceAvg

C_UpTrend := close > priceAvg


if trendRule == trendRule2

sma200 = sma(close, 200)

sma50 = sma(close, 50)

C_DownTrend := close < sma50 and sma50 < sma200

C_UpTrend := close > sma50 and sma50 > sma200

C_Len = 14 // ema depth for bodyAvg

C_ShadowPercent = 5.0 // size of shadows

C_ShadowEqualsPercent = 100.0

C_DojiBodyPercent = 5.0

C_Factor = 2.0 // shows the number of times the shadow dominates the candlestick body


C_BodyHi = max(close, open)

C_BodyLo = min(close, open)

C_Body = C_BodyHi - C_BodyLo

C_BodyAvg = ema(C_Body, C_Len)

C_SmallBody = C_Body < C_BodyAvg

C_LongBody = C_Body > C_BodyAvg

C_UpShadow = high - C_BodyHi

C_DnShadow = C_BodyLo - low

C_HasUpShadow = C_UpShadow > C_ShadowPercent / 100 * C_Body

C_HasDnShadow = C_DnShadow > C_ShadowPercent / 100 * C_Body

C_WhiteBody = open < close

C_BlackBody = open > close

C_Range = high-low

C_IsInsideBar = C_BodyHi[1] > C_BodyHi and C_BodyLo[1] < C_BodyLo

C_BodyMiddle = C_Body / 2 + C_BodyLo

C_ShadowEquals = C_UpShadow == C_DnShadow or (abs(C_UpShadow - C_DnShadow) / C_DnShadow * 100) < C_ShadowEqualsPercent and (abs(C_DnShadow - C_UpShadow) / C_UpShadow * 100) < C_ShadowEqualsPercent

C_IsDojiBody = C_Range > 0 and C_Body <= C_Range * C_DojiBodyPercent / 100

C_Doji = C_IsDojiBody and C_ShadowEquals


patternLabelPosLow = low - (atr(30) * 0.6)

patternLabelPosHigh = high + (atr(30) * 0.6)


C_EngulfingBullishNumberOfCandles = 2

C_EngulfingBullish = C_DownTrend and C_WhiteBody and C_LongBody and C_BlackBody[1] and C_SmallBody[1] and close >= open[1] and open <= close[1] and ( close > open[1] or open < close[1] )

alertcondition(C_EngulfingBullish, title = "Engulfing", message = "New Engulfing - Bullish pattern detected.")

if C_EngulfingBullish

    var ttBullishEngulfing = "Engulfing\nAt the end of a given downward trend, there will most likely be a reversal pattern. To distinguish the first day, this candlestick pattern uses a small body, followed by a day where the candle body fully overtakes the body from the day before, and closes in the trend’s opposite direction. Although similar to the outside reversal chart pattern, it is not essential for this pattern to completely overtake the range (high to low), rather only the open and the close."

    label.new(bar_index, patternLabelPosLow, text="BE", style=label.style_label_up, color = color.blue, textcolor=color.white, tooltip = ttBullishEngulfing)

bgcolor(highest(C_EngulfingBullish?1:0, C_EngulfingBullishNumberOfCandles)!=0 ? color.blue : na, offset=-(C_EngulfingBullishNumberOfCandles-1))


*The bullish and bearish indicators shall be combined into one indicator, any object e.g. arrow can be used to indicate the signal, plus integration of alerts. Trend rules not necessary and may be removed for simplicity. Conditions in bold text are the only ones necessary to create arrow object and alert. Thank you.


Откликнулись

1
Разработчик 1
Оценка
(170)
Проекты
193
11%
Арбитраж
37
38% / 35%
Просрочено
5
3%
Загружен
2
Разработчик 2
Оценка
(128)
Проекты
162
36%
Арбитраж
4
25% / 50%
Просрочено
13
8%
Свободен
3
Разработчик 3
Оценка
(409)
Проекты
537
75%
Арбитраж
9
44% / 0%
Просрочено
24
4%
Свободен
Похожие заказы
This is not an EA that actually opens/closes trades. Instead this project involves creating a dashboard where the user can create a grid trade scenario with initial entry and scale trade pip distances, lot sizes for each trade, and draw down amount. It then calculates the break-even + profit level where all trades would close. For each new scale trade the BE+ point is recalculated which is then displayed on the
Hi I have the code in pinescript for an indicator that I need done in Ninja Trader, I wanted this indicator in NT bcs I chart in NT, and if the indicator could also have been an automated strategy even better. Please confirm that it will be an indicator and Automated Trading Strategy
Hi guys I would like to k ow if someone has experience with machine learning models? I would like to train a model to identify if there is a range market or trendy market based on several parameters like EMA and ATR for example. If we use for example a 20 and 50 EMA and we measure the distance between both lines the algo should oearn if the trend is strong or weak. If it‘s steong it keeps trending and if it‘s weak
Hello I need a very simple indicator This indicator should show the highest floating or history drawdown of the account It means that it can display the highest number that the account drawdown to be displayed on the chart in this format max drawdown account(xxxx$$) ...date(00/00/00)time:(00:00) max drawdown currency ..( currency name with max drwadown) . (xxxx$$) date(00/00/00)time:(00:00) thanks
I want have the possibility to increase lotsize not alone by Lot-multiplier rather I want add a fix-lot increase for excample for 0,05 lot. I want have this for buy / sell and hedge-buy and hedge sell
Hello, I‘m interested in an indicator to predict the next candles probability (bullish or bearish). But honestly I have no idea how to do this. Would be interested in your opinion how we can create such an indicator. Please let me know if you‘ve done similar work
Profitable EA HFT 50 - 300 USD
From a long time i am searching for a profitable EA i have lost a lot , and now i have only 300$ to buy a profitable EA , i wish to say with 0 losses but some or most traders they don't want to hear this i am really tired of searching for a programmer to just create me a profitable EA with the least losses or zero losses maybe nearly 1 year i am searching i just need an HFT EA that can work very well on MT4,MT5
у нас есть стратегия, нам нужно написать mql5-код ​​для тестера стратегий МТ5,Цена договорная. Мой контакт @abbosaliyev из Telegram Программист должен знать РУССКИЙ ИЛИ УЗБЕКСКИЙ язык. Задание: разработать тестер, который использует шаблон условий на открытие и проверит весь исторический график на всех доступных таймфреймах. Остальная информация будет предоставлена ​​после согласования цены
New york session based strategy 9:30 open Price takes out buy side or sell side liquidity Usually using 15min high and lows 5m entry Price takes out that high/low and price must close strongly back into the zone Is price is above price we have a sell bias vis versa for buys Sl is at the high or low with option for “offset” for cushion Tp is usually the opposite High or low. Would like the option for set pips-points &
Utilizing the MQL5 MetaEditor Wizard, I created an Expert Advisor, having the following Signal indicators: I was able to optimize the EA and reached a backtest with the following specifications: I was able to reach a profit level of 30K, as indicated below. However, the Bot is not without faults and following the backtest, I started a forward test with real live data and the results were not so great. The EA took a

Информация о проекте

Бюджет
30 - 40 USD
Исполнителю
27 - 36 USD
Сроки выполнения
от 2 до 4 дн.