Trabalho concluído
Tempo de execução 5 dias
![](https://c.mql5.com/i/avatar/avatar_na2.png)
Comentário do desenvolvedor
5+
Termos de Referência
I need you to add two indicators inside my heding robot code, so I don't need to use the indicators outside). I want him to open orders only
when there is agreement on the signals of the 2 indicators.
This robot is from Heding and is based on mathematical calculations, which works within a channel as in the print example below. It works semi
automatic, but I want to turn it into a fully automatic robot with the 2 indicators that I will add.
The 2 indicators are:
* STI_OBOS
* ADX ARROW
1. I want the robot to open orders only when the STI_OBOS indicators and ADX have alerts on the same side, but it is VERY IMPORTANT that the
STI_OBOS signal is strong. That is, the signals that appear within or very close to the bolinger bands lines should be ignored ... Only
the signals that form a large wave far away from the bolinger bands are valid (in which case it would be better to insert levels to make it
easier for detect the difference of strong signal and weak signal)
2. After having the signal from the first indicator, the robot must wait for the second signal from the other indicator to the same side to
confirm the opening of the order.
The closing of orders should continue to be the robot's cauculos, because the indicators are only for the EA to start.
3. Enter a variable (true false) so that I decide whether or not the robot should continue to open a new cycle after it profitably closes the first cycle.
I have the source code of my MT4 robot, and also the indicators source codes (MT4)
Respondido
1
Classificação
Projetos
103
20%
Arbitragem
6
0%
/
83%
Expirado
3
3%
Livre
2
Classificação
Projetos
506
40%
Arbitragem
147
18%
/
72%
Expirado
99
20%
Carregado
3
Classificação
Projetos
0
0%
Arbitragem
3
0%
/
100%
Expirado
0
Livre
4
Classificação
Projetos
138
41%
Arbitragem
30
7%
/
77%
Expirado
17
12%
Livre
5
Classificação
Projetos
932
47%
Arbitragem
302
59%
/
25%
Expirado
124
13%
Ocupado
6
Classificação
Projetos
5
0%
Arbitragem
2
0%
/
100%
Expirado
0
Livre
7
Classificação
Projetos
204
30%
Arbitragem
25
40%
/
44%
Expirado
12
6%
Livre
8
Classificação
Projetos
34
26%
Arbitragem
7
14%
/
43%
Expirado
7
21%
Livre
9
Classificação
Projetos
415
38%
Arbitragem
86
44%
/
19%
Expirado
70
17%
Ocupado
10
Classificação
Projetos
6
33%
Arbitragem
3
0%
/
100%
Expirado
0
Livre
Pedidos semelhantes
Buy an sell symbols and guide showing entry to buy or sell setups and I need it gives and tell me to enter buy or to enter sell by automation nnnnnnnnnn fgggghhuuuiijh hhrddfhuuufffff yygggg hhgt hiidcb hygdfbby gyytdv uttrdd. Httdd hyyydv. Yhygf. Uu juhgff uyttt uuuytdbhy uuuyyy hhhff jjueeiivhgffdgu hyuu7trg yyyyffj yyytd u6tttf uuyrrrhi uytrrfh utterly jyrfgkkttv uhyybhhyy hytfgivuyt utfbh utghjio7t. Uuytg uytru
Utilizing the MQL5 MetaEditor Wizard, I created an Expert Advisor, having the following Signal indicators: I was able to optimize the EA and reached a backtest with the following specifications: I was able to reach a profit level of 30K, as indicated below. However, the Bot is not without faults and following the backtest, I started a forward test with real live data and the results were not so great. The EA took a
Connect from Mt5 via binary deriv account api
30 - 50 USD
Connect from Mt5 via binary deriv account api I have mt5 indicator, need to connect with binary deriv account through api. If anyone can setup via API then contact me. everything control mt5
50% Retracement Indicator
30 USD
Hello I am looking for a developer to create an 50% retracement Indicator of the previous candle . So once a candle close the Indicator is supposed to take the full candle size from high to low and make a 61% and 50% level on that candle and I would like the candle to show until the next previous candle is done creating. After this I would look to create an ea with it possibly
Hi, I have 2 indicators which are based on the super trend , the alerts on indicator (1) does not work at all , and on the other indicator the alerts do not come on time on time, which is kind of delayed. see attached file below
Looking for an experienced developer to modify my existing TDI strategy , want to add filter for Buy and Sell Signals, Arrows are displayed on chart and what only to leave high accurate arrows Source code to be provided
I have the mq5 file, I need a buffer adding to the indicator, so it appears in the data window so I can reference it later in an EA. As the below screenshot shows, there is a median ray line from yesterday (the dashed horizontal line) - I want this value in the data window called Median Ray. I want this to be a single value per day, so todays Median Ray would be 17868, and so on each day. So I want all the Developing
Creating an indicator for metatrader 4
30 - 50 USD
I would like to develop my own indicator on metatrader 4 and tradingview. We would start with a basic version that we would improve later. It is an indicator based on several analyses and which would provide several indications. I am looking for someone who can develop on MT4 and Mt5, initially I would like to do it on mt4 and then on mt5. If you have expertise in pinescript it is a plus because I would like to
Indicator Conversion
30+ USD
I urgently require swift assistance to convert a complex indicator into a fully functional scanner, capable of automatically sending real-time data, alerts, and notifications via email, ensuring seamless integration and prompt delivery of critical information to facilitate informed decision-making and timely action
Make indicator lighter/faster
30+ USD
I need to improve the code of an indicator that is too heavy and slow when running and when used with iCustom in an EA. No other changes to the indicator are requested: the original features of the indicator should remain as theay are. I'll provide the indicator after job acceptance. I request final source code mq5 file. Thank you Regards
Informações sobre o projeto
Orçamento
30+ USD
Desenvolvedor
27
USD
Prazo
de 5 para 10 dias