작업 종료됨

실행 시간 13 일
고객의 피드백
Aleksandr has delivered with perfection. His response time is excellent, understood what I wanted, he went above and beyond and will hire him again for future developments. Pleasure to do work with.

명시

Hello Everyone,

I need a real professional who can create the same indicator that already exists such as GraphOnGraph (GoG) seen here. Although it is an extremely simple indicator you need to be very familiar with it or look at it if you haven't seen it before, particularly the coding and the mathematics behind it.

*** Please note I need this done within 5 days or less from acceptance as it is very urgent. If you complete it within 3 days there will be a 20% bonus! ***

I will be using the same developer to enhance this indicator later and to turn this into a robot with a Money Management Strategy System (MMSS). And after that, also another MAJOR project involving the development of a multi-indicator matrix (adding to this one), where this will also be turned into an EA Robot with MMSS.

No newbies, only established professionals please. I don't have time to try out developers. I will be paying good money as time goes on so please don't waste my time. I've wasted enough as it is!


As for this indicator, I need a lot of extra modifications to the existing (GoG) version. There will be 2 parts to this indicator.

1. A GRAPH showing multiple symbols on one frame like the GoG. (With the current GoG version you can add multiple GoGs on one timeframe).

2. An ALL IN ONE DASHBOARD.


1. GRAPH showing multiple symbols:

Pretty much like the GoG version but with the options to change its view via the Dashboard as described further down.

gog

As you can see I have added all 10 pairs onto one graph with different colours for each. I then added a scale from 0-100 from top to bottom extremes. This was for the M1 timeframe. If you noticed the extreme tops and extreme bottoms are good indicators of reversal for that timeframe. If a pair tops out then I know it will most like head down until it reaches the bottom. I measure where it's at using a matrix (as shown below) but I do this manually which takes too much time. That's why I need you to develop it for me automatically. 

Notice also that there is a figure at the top right (1.689) and one at the bottom right (1.1595). This is the cumulative value of all pairs but I need you to explain to me mathematically how this calculates in a basic manner.

Please see the matrix (below) where I entered values for the graph manually.

yoyo

Another thing that is important... notice when you have 10 pairs on one graph, you zoom out and set the scale, right? You can clearly see nice and straight bottom and top, but... as soon as you scroll or zoom, those bottoms and tops change. Notice that?

The calculations in the matrix panel needs to be exactly the same as the graph as I showed, otherwise it becomes something different and I don't want that.

The panel/matrix needs to emulate the graph exactly. And it needs to emulate it with full zoom out only.


2. ALL IN ONE DASHBOARD

The dashboard will have several sections:

  • the main matrix table of symbols (currency pairs, commodities, shares etc) with all time frames (M1-MN) showing where they are on the graph - see table image above. It must also allow for indices and commodities and shares if needed as long as the symbol name is entered. There should be an "add symbol" button under the last existing symbol where a text box opens. Once entered a new row for that symbol will be added. The list should be able to add up to 50 symbols in the mix and be seen visually on a single chart with different colours for each. The chart should be separate to the dashboard as it needs to be enlarged for a good view.
  • another settings section for basic visual viewing options (open/high/low/close -- candlestick/line/ohlc bar etc).


- a graph showing all selections like the existing indicator (GoG) but with an option to view as line/open/close/high/low/ohlc with buttons available on the dashboard in the settings section, which will also be visible. 

- currency pairs (or stock indices) can be added via the dashboard by adding rows via a button.

- the ability to open a chart for any currency pair or indices by clicking a button.

- the ability to hide/show symbol on live graph/chart but still keep it in the main matrix table. The reason for this is because sometimes you can't see if a particular pair has topped out or bottomed out due to other colours in its way.

- the main table shows index value for each time frames with green going up (+1% to +100%) and red going down (-1% to -100%).

- it needs to be fast and not slow down the computer or MT4 itself.

- I will need some basic advice/education about how the limits/calculations work when you add multiple currency pairs to the same chart.

- code must be hidden and un-readable and un-crackable. You must show me or leave instructions on how to show them if needed later.

- basic logo. The name of this indicator will be provided to the winning developer.

- notifications to email or phone when any symbol or timeframe (in the matrix) approaches top or bottom extreme.


Thank you and good luck to all of you.

응답함

1
개발자 1
등급
(195)
프로젝트
395
28%
중재
155
20% / 52%
기한 초과
112
28%
무료
비슷한 주문
Hi I do not know why but my other order have been deleted and it's not me... I do not know what i did wrong, let me explain again. Would you be able to decompile and/create a scalper EA with the option I do ask. I had somebody built a EA called Drawdown manager for me that I do use to manage risk of any EA that I test and I have the built code. My problem is that I cannot back test this EA Fast M1 Gold Scalper
CHAPTER 1: BASICS 1.THE BASICS 1.1. EXPANSION AND RETRACEMENT Expansion =>occurs when there is an impulse movement towards a direction. Retracement => is the correction movement after an impulse movement. 1.2. FIBBONACCI RETRACEMENT USED TO DETERMINE THE END OF THE RETRACTION MOVEMENT, USUALLY THE PRICE RETRACTS TO 50% OR UNTIL OTE (0.62, 0.705, 0.79) BEFORE ANOTHER IMPULSE MOVEMENT OCCURS. 1.3. BMS - BREAK IN MARKET
Hello i need someone who can convert a trading view indicator into an mt5 indicator that can work smoothly also need to add an alert on the indicator i will require to test the indicator run it for 1-2days to confirm all is okay thank you
i have a ready made SMC EA and looking for optimizing and debugging and also adding back the missing things in the requirement file. Basically work with the current code and refine it to fit the requirement file. Most indicator is already in the EA and the requirement file below are mostly finish. here are the things need to add back and debug based on the requirement file 1. TP from the filter and need to check
Hello. I would like to get a TOS script converted to Tradingview for my alerts. I’m haven’t a hard time getting my entry point because the script does not fire off alerts on thinkorswim. I will send the script so you can see if it’s possible
The strategy is a martingale type . i.e if it hits the stop loss , it will double the lot size and place again in that direction, and when it hits the take profit at any level of the martingale, it will start over from the first lot size used initially
1. Strategija: EA će biti skalper dizajniran za trgovanje zlatom na M1 ili M5 vremenskom okviru. Trgovanje će se bazirati na kombinaciji indikatora: Moving Average (MA): Korištenje eksponencijalnog pomičnog prosjeka (EMA) s brzim (5) i sporim (20) periodom za identifikaciju trenda. Stochastic Oscillator : Korištenje za identifikaciju prekupovanih i preprodanih područja (razine 80/20). Bollinger Bands : Kao pomoć pri
The requirements for the order of robots XAUUSD and XAGUSD EURUSD forex in the STOP loss TAKE profit signal in this order, you can bring benefits to the changes in the market, that is, when the market changes frequently, it will also help to prevent losses and bring great profits all work to trade high and low python line position
I'm seeking a C# developer with Quantower experience to assist me in exporting data from the Option Analytic panel in real-time via an API. This data will be exported based on a window app, not a web app. You can review the document at the following link : . https://github.com/Quantower/Examples/blob/master/IndicatorExamples/GetOptionsInfo.cs Please check it before bidding NOTE : - Quantower is an app, not web
Please I Need A Programmer Who Can Create A Requirement Specification Document For My Trading System THE IDEA OF THE INDICATOR Create A Standard ZigZag Auto Fibo Indicator Combined With A ZigZag Fibonacci Time Zone Indicator Which Has The Specified Levels Written In The Indicator Strategy TEXT FILE/DOCUMENT HOW DOES THE INDICATOR KNOW AN UPTREND MOVEMENT? If Price Hasn't Touched The 123.6% Level Of The Recent Static

프로젝트 정보

예산
30 - 70 USD
개발자에게
27 - 63 USD
기한
 5 일