Servizio freelance su MQL5.com: Modify existing EA to trade at S/R zones [issue 2]

Descrizione

Specifiche

I have an existing EA that I would like to add some features to:

The current EA can operate either as a simple indicator, or an auto-trading EA and generates buy / sell signals on the basis of candlestick patterns.

When in auto-trading mode, the EA will only place an order once a valid buy/sell signal has been received, and the price has also moved "x" pips in the correct direction as a confirmation.

I wish to add/modify the following features to the EA/Indicator.

1. Add support/resistance zones where the signal candlestick must be touching to generate a valid signal. e.g in the attached image Signal 1 (a buy arrow) has it's High value in Zone 1 so would initially be considered to be valid.

An up/down arrow should be drawn on the screen when a valid signal is generated, but this is not yet a buy/sell signal.

Once a valid signal has been generated, it is not necessary for the confirmation move to stay within the zone.

10 resistance zones should be supported, with the upper and lower limits entered in the EA settings.

When new values for the S/R zones are entered, the original rectangles should be removed.

The rectangles should be drawn with a start time of at least 1 year ago, and an end time of at least +1 day (can be infinite in both directions). The colour of the rectangles should be selectable in the input parameters.

2. Only allow buy signals if the price has entered from above a zone, and only allow sell signals if the price has entered from below the zone. ( so in the case of Signal 1, this would no longer be valid as the price entered from below the zone).

The valid signals in the attached image are: 2, 4, 9.

In order to debug the EA it would be useful to display the status of the "price from above/ price from below/ out of zone".

Whilst any part of a candle touches a zone it is considered to still have entered from the inital entry condition, i.e. the price enters from below before signal bar 1, and stays "from below" until the price leaves the zone on the candle after signal 3.

The price enters Zone 2 from below at Signal 4, and then enters Zone 1 from above on the next bar.

3. Resolve an issue where the existing EA creates multiple up/down arrows on the chart for each valid signal. (At the moment the EA can generate up to around 100 arrow objects on the chart at the same location)

4. Stop auto-trading at the end of each day at a pre-set time (variable time parameter required to select end of day, e.g. 22:30). The EA should stop trading (not open new orders) at the end of each day, and only restart trading when an on-screen button is pressed at the start of the next trading day ( this is to allow me to change the zones as they only remain valid for 1 day ).

The on-screen button should display "Press to activate" when the EA has stopped, and "Running" once activated.

5. The EA should also draw a number of groups of lines that show various additional support and resistance lines. Data for each line will be manually entered, it is not necessary to calculate any values. The lines required should be labelled as follows:

These lines are not used by the auto-trading feature, and are just visual. Old lines should be removed when new values are entered.

i) All round numbers from P1 to P2, in P3 increments, e.g. 5000 - 7000 in 100 increments. One definable line type and one colour for this group. The limits and distance between the round numbers should be defined in three fields, e.g. 5000,7000,100.

ii) R3,R2,R1.One definable line type and one colour for this group.

iii) Pivot. One definable line type and one colour for this group.

iv) S1,S2,S3. One definable line type and one colour for this group.

v) Support Lines. 6 support lines. One definable line type and one colour for this group.

vi) Resistance Lines. 6 resistance lines. One definable line type and one colour for this group.
vii) Open, High, Low, Close. One definable line type and one colour for each of these 4 lines.

6. Include a trailing stop which can be turned on or off.

7. The final EA must still be able to act as either an indicator or EA, i.e. be able to turn off trading, but still generate the signal candle alerts.

8. An on-screen indication of the following conditions should be shown in order to help debug operation of the EA [Price out of zone, Price approached from above, Price approached from below].

If the price touches two zones then the signal/trade is invalid.

The price is considered "Out of zone" once a candle has fully completed and is not touching a zone.

File:

PNG

Valid_Buy_Sell_Signals_in_Zones.png

12.1 Kb

TXT

Specification.txt

4.5 Kb

Con risposta

Valutazioni

(121)

Progetti

134

66%

Arbitraggio

25% / 56%

In ritardo

16%

Gratuito

Ordini simili

I am looking to develop an automated trading bot based on a strategy involving the crossing of four Simple Moving Averages (SMA). The bot should be capable of entering trades based on this strategy. Additionally, I would like to incorporate some custom diversions tailored for NinjaTrader

We are seeking a talented and experienced developer to convert two sophisticated TradingView indicators to NinjaTrader 8. These indicators are crucial for our trading strategy, and we need them to function flawlessly in the new environment. The project comes with specific usage restrictions, which will be discussed in detail with the chosen developer. Requirements: Extensive experience with both TradingView and

preciso de um robô com duas médias móveis, uma exponencial high e uma exponencial low. preciso também ter a opção de utilizar e todos os tempos gráficos e alterar os parâmetros das médias. entrada de compra será feita quando um candle de alta romper e fechar a cima da média high e fechará a posição quando um candle de baixa romper e fechar a baixo da média low. a venda será feita quando o candle de baixa romper e

Greetings, As the title suggests, I am trying to convert an indicator that calls itself via an iCustom call like this. iMAArray_Buffer[loop_1] = iCustom ( NULL , Selected_TF, MQLInfoString ( MQL_PROGRAM_NAME ), "calculate" , RPeriod, MType, MPeriod, 1 , shift); Full code will not be provided, only the position that needs fixing. I cannot get this working in MQL5 but the original code runs smoothly in MQL4. Please

I need a chart to replicate/track my equity + Balance Curve into my mt4. Also this chart i need to be able to add Stochastic / Bollingerband / Moving average on the equity/balance curve. Besides the equity curve i would like the indicator to show the Line-chart of my win + 1 and my loss -1 which results in a win-loss curve. ( i will discuss this with the choosen developer in depth. ) More information on what i want

Greetings great developer, I am in search of a highly skilled developer to assist with an exciting project. I need to convert two open-source TradingView indicators to NinjaTrader 8 and implement a usage restriction based on computer IDs. If you have experience with NinjaTrader 8 coding please let me know. I’d be happy to discuss the details further

Hello, This is pretty simple and its an indicator with On/Off button 1-Off will remove all indicator from the chart. 2-On will put them all back again with the same settings

We need bot that trades when medium and low impact news hits It will release pending order both directions few min prior to news impact And will have certain risk management strategy attached Example If Monday and Tuesday news successful clears profits It will reduce risk for next news events until new week starts each week message on tg: Dstatewealthtrading NOTE: 4 YAERS OF EXPERIENCE UPWORD, YOU MUST BE A

I need someone the create a supertrend indicator based on Heikin Ashi candles instead of normal candles. Needs to be exactly the same as the supertrend (original one) + ha from tradingview. In m1,m5,m15 the indicator must have the same values found with the tradingview. Work that meets this requirement will be accepted ( depending on the broker and spread, however, a few pips of difference will be accepted)

Here is a detailed instruction for the coder to implement the vertical lines based on the BrainTrainSignalAlert indicator: --- **Task: Implement Vertical Lines for Alerts from BrainTrainSignalAlert Indicator** **Objective:** Create a system that adds vertical lines on specified timeframes (M5 or M30) whenever an alert is generated by the BrainTrainSignalAlert indicator on the H1, H4, and D1 timeframes. The lines

Informazioni sul progetto

Budget

20 - 50 USD

Per lo sviluppatore

18 - 45 USD

Scadenze

da 1 a 5 giorno(i)

Qualità delle specifiche
Qualità del controllo dei risultati
Disponibilità e capacità di comunicazione