Questions des débutants MQL5 MT5 MetaTrader 5 - page 1403

 
Marco Nicholas Comment() dans switch() au lieu du même Print.

Est-ce vraiment si difficile de l'essayer soi-même ?

 
Vitaly Muzichenko #:

Serait-il vraiment si difficile de l'essayer soi-même ?

J'ai essayé, ça marche.

Une telle question s'est posée à cause de l'aide interne de F1 concernant "switch", car seul Print y est spécifié. Et j'ai remarqué précédemment queComment() dans void OnTick() ralentit grandement l'exécution du code.

 
J'ai acheté un indicateur mais quand je l'installe j'ai la boîte de dialogue de la communauté MQL5 et il me dit que mon login et mon mot de passe ne sont pas valides, mais pourtant j'entre les informations d'identification envoyées à mon email, j'ai déjà changé le mot de passe, mais rien et je suis enregistré.
 
Quelqu'un peut-il m'aider à faire cela ?
 
kduarte #:
Quelqu'un peut-il m'aider à faire cela ?

Assurez-vous que vous utilisez votre login kduarte et que le mot de passe de votre compte MQL5 ne comporte pas plus de 10 caractères.

 
Vladimir Karputov #:

Vous ne contrôlez en aucun cas les ORDERS, vous vérifiez le numéro et le type de la POSITION dans le code. De plus, vous ne travaillez pas correctement avec les POSITIONS (erreur d'utilisation de 'PositionSelect(_Symbol)' si votre compte est de type hedging). Votre algorithme présente de graves erreurs de conception.

Ce que vous devez faire :

1. Travailler EXCLUSIVEMENT au moment de la naissance d'une nouvelle barre. S'il n'y a pas de nouvelle barre - ne faites rien, ne faites pas de mouvements inutiles.

2. Ce point sera divulgué une fois le point 1 terminé.

Bonjour Vladimir,

Encore une fois, merci beaucoup pour les conseils donnés. Il m'a fallu un certain temps pour comprendre les choses.

Ce que j'ai changé sur la base de vos conseils :

- J'ai changé la logique d'ouverture et de fermeture pour une version de couverture.

- Je travaille maintenant avec la naissance d'une nouvelle barre pour certains calculs/placement d'ordre.


Depuis que ces changements sont appliqués, les ordres ne sont plus ouverts et fermés qu'une seule fois. Mais maintenant j'ai un problème avec le backtesting. Je reçois une erreur indiquant que le tableau de la ligne 121 est hors de portée. Pouvez-vous m'indiquer la bonne direction ? J'ai essayé d'utiliser un tableau de type double pour les prix de clôture et copyClose, mais je reçois toujours l'erreur.

Également excité pour le point 2 :)


Code jusqu'à présent :

En jaune, j'ai mis en évidence la ligne 121.

void OnTick()

{ 
        MqlTradeRequest request;
        MqlTradeResult Result;
        ZeroMemory(request);
        
//Setting newBar event handler
bool newBar = true;
int barShift =0;

newBar = NewBar.CheckNewBar(_Symbol,_Period);
barShift = 1;
        
// Get current market orders
        ulong buyTicket = 0, sellTicket = 0;
        for(int i = 0; i < PositionsTotal(); i++)
        {
           ulong ticket = PositionGetTicket(i);
           PositionSelectByTicket(ticket);
           
           if(PositionGetInteger(POSITION_TYPE) == POSITION_TYPE_BUY)
           {
              buyTicket = ticket;
              Buy_openend = true;
           }
           else if(PositionGetInteger(POSITION_TYPE) == POSITION_TYPE_SELL)
           {
              sellTicket = ticket;
              Sell_openend = true;
           }
        }
   



if(newBar == true)
  {
      double closingprice[];
      datetime date_time[];
      MqlRates bar[];
      ArraySetAsSeries(bar,true);
      ArrayResize(bar,80);
      CopyRates(_Symbol,_Period,0,56,bar);
      
      
      double close = bar[1].close;
      datetime time = bar[1].time;

datetime startTime = CreateDateTime(OpentimeHH,OpentimeMM);
datetime endTime = CreateDateTime(EndtimeHH,EndtimeMM);

if(OpentimeHH <= EndtimeHH)
          {
          endTime -= TIME_ADD_DAY;
          }
      
Comment(close,time, "start time:", startTime, "endtime:", endTime);

int bar_index = iBarShift(_Symbol, PERIOD_CURRENT, endTime,true);
double closeprev = bar[bar_index].close; //line 121


// Check for trade conditions
bool BuyCondition = (close >= closeprev) && (bar[1].time == startTime) && (Buy_openend == false);
bool SellCondition = (close <= closeprev) && (bar[1].time == startTime) && (Sell_openend == false);


// Open Market buy order
if(BuyCondition)
  {
   //Close Posible Sell Order
   if(sellTicket > 0)
     {
      PositionSelectByTicket(sellTicket);
      request.action = TRADE_ACTION_DEAL;
      request.type   = ORDER_TYPE_BUY;
      request.symbol = _Symbol;
      request.position = sellTicket;
      request.volume = PositionGetDouble(POSITION_VOLUME);
      request.price = SymbolInfoDouble(_Symbol,SYMBOL_ASK);
      request.type_filling = ORDER_FILLING_IOC;
      request.deviation = 50;
      
      bool sent = OrderSend(request,Result);
     }
     
     request.action = TRADE_ACTION_DEAL;
                request.type = ORDER_TYPE_BUY;
                request.symbol = _Symbol;
                request.position = 0;
                request.volume = TradeVolume;
                request.price = SymbolInfoDouble(_Symbol,SYMBOL_ASK);
                request.type_filling = ORDER_FILLING_IOC;
                request.sl = 0;
                request.tp = 0;
                request.deviation = 50;
                
                bool sent = OrderSend(request,Result);
  }

//Open Market Sell Order
if(SellCondition)
  {
     //Close posible buy orders
     if(buyTicket > 0)
       {
      PositionSelectByTicket(buyTicket);
      request.action = TRADE_ACTION_DEAL;
      request.type   = ORDER_TYPE_SELL;
      request.symbol = _Symbol;
      request.position = buyTicket;
      request.volume = PositionGetDouble(POSITION_VOLUME);
      request.price = SymbolInfoDouble(_Symbol,SYMBOL_BID);
      request.type_filling = ORDER_FILLING_IOC;
      request.deviation = 50;
      
      bool sent = OrderSend(request,Result);
     }
  request.action = TRADE_ACTION_DEAL;
                request.type = ORDER_TYPE_SELL;
                request.symbol = _Symbol;
                request.position = 0;
                request.volume = TradeVolume;
                request.price = SymbolInfoDouble(_Symbol,SYMBOL_BID);
                request.type_filling = ORDER_FILLING_IOC;
                request.sl = 0;
                request.tp = 0;
                request.deviation = 50;
                
                bool sent = OrderSend(request,Result);
  }
}
  }
 
Divania111 # :


Vérifiez le résultat de l'opération :

int bar_index = iBarShift ( _Symbol , PERIOD_CURRENT , endTime, true );
 
Vladimir Karputov #:

Vérifiez le résultat de l'opération :

Omg ! Merci beaucoup !
 
Bonjour commerçants... S'il vous plaît aider

Comment modifier le risque en pourcentage en taille de lot ou en lot fixe dans la répartition EA Experts : répartition.

 //+------------------------------------------------------------------+
//|                           breakdown(barabashkakvn's edition).mq5 |
//|                                                           Arist0 |
//|                                              arist0.rr@gmail.com |
//+------------------------------------------------------------------+
#property copyright "Arist0"
#property link        "arist0.rr@gmail.com"
#property version    "1.001"
//---
#include <Trade\PositionInfo.mqh>
#include <Trade\Trade.mqh>
#include <Trade\SymbolInfo.mqh>  
#include <Trade\AccountInfo.mqh>
#include <Trade\OrderInfo.mqh>
#include <Expert\Money\MoneyFixedMargin.mqh>
CPositionInfo  m_position;                   // trade position object
CTrade         m_trade;                       // trading object
CSymbolInfo    m_symbol;                     // symbol info object
CAccountInfo   m_account;                     // account info wrapper
COrderInfo     m_order;                       // pending orders object
CMoneyFixedMargin *m_money;
//--- input parameters
input ushort    InpStopLoss       = 50 ;       // Stop Loss (in pips)
input ushort    InpTakeProfit     = 50 ;       // Take Profit (in pips)
input ushort    InpTrailingStop   = 5 ;         // Trailing Stop (in pips)
input ushort    InpTrailingStep   = 5 ;         // Trailing Step (in pips)
input ushort    InpMinDistance    = 25 ;       // Minimum distance
input double    Risk              = 5 ;         // Risk in percent for a deal from a free margin
input ulong     m_magic           = 585000550 ; // magic number
//---
ulong           m_slippage= 10 ;                 // slippage

double          ExtStopLoss= 0.0 ;
double          ExtTakeProfit= 0.0 ;
double          ExtTrailingStop= 0.0 ;
double          ExtTrailingStep= 0.0 ;
double          ExtMinDistance= 0.0 ;

double          m_adjusted_point;             // point value adjusted for 3 or 5 points

bool            bln_delete_all= false ;
datetime        dt_last_delete= 0 ;
//+------------------------------------------------------------------+
//| Expert initialization function                                   |
//+------------------------------------------------------------------+
int OnInit ()
  {
   if (InpTrailingStop!= 0 && InpTrailingStep== 0 )
     {
       string text=( TerminalInfoString ( TERMINAL_LANGUAGE )== "Russian" )?
                   "Трейлинг невозможен: параметр \"Trailing Step\" равен нулю!" :
                   "Trailing is not possible: parameter \"Trailing Step\" is zero!" ;
       Alert ( __FUNCTION__ , " ERROR! " ,text);
       return ( INIT_PARAMETERS_INCORRECT );
     }
   if (!m_symbol.Name( Symbol ())) // sets symbol name
       return ( INIT_FAILED );
   RefreshRates();
//---
   m_trade.SetExpertMagicNumber(m_magic);
   m_trade.SetMarginMode();
   m_trade.SetTypeFillingBySymbol(m_symbol.Name());
   m_trade.SetDeviationInPoints(m_slippage);
//--- tuning for 3 or 5 digits
   int digits_adjust= 1 ;
   if (m_symbol. Digits ()== 3 || m_symbol. Digits ()== 5 )
      digits_adjust= 10 ;
   m_adjusted_point=m_symbol. Point ()*digits_adjust;

   ExtStopLoss    = InpStopLoss     * m_adjusted_point;
   ExtTakeProfit  = InpTakeProfit   * m_adjusted_point;
   ExtTrailingStop= InpTrailingStop * m_adjusted_point;
   ExtTrailingStep= InpTrailingStep * m_adjusted_point;
   ExtMinDistance = InpMinDistance  * m_adjusted_point;
//---
   if (m_money!= NULL )
       delete m_money;
   m_money= new CMoneyFixedMargin;
   if (m_money!= NULL )
     {
       if (!m_money.Init( GetPointer (m_symbol), Period (),m_symbol. Point ()*digits_adjust))
         return ( INIT_FAILED );
      m_money.Percent(Risk);
     }
   else
     {
       Print ( __FUNCTION__ , ", ERROR: Object CMoneyFixedMargin is NULL" );
       return ( INIT_FAILED );
     }
//---
   bln_delete_all= false ;
   dt_last_delete= 0 ;
//---
   return ( INIT_SUCCEEDED );
  }
//+------------------------------------------------------------------+
//| Expert deinitialization function                                 |
//+------------------------------------------------------------------+
void OnDeinit ( const int reason)
  {
//---
   if (m_money!= NULL )
       delete m_money;
  }
//+------------------------------------------------------------------+
//| Expert tick function                                             |
//+------------------------------------------------------------------+
void OnTick ()
  {
//---
   if (bln_delete_all)
     {
       if (IsPendingOrdersExists())
        {
         DeleteAllPendingOrders();
         //dt_last_delete=iTime(m_symbol.Name(),Period(),0);
         return ;
        }
       else
        {
         bln_delete_all= false ;
         dt_last_delete= iTime (m_symbol.Name(), PERIOD_D1 , 0 );
        }
     }
//---
   if (IsPendingOrdersExists() && dt_last_delete< iTime (m_symbol.Name(), PERIOD_D1 , 0 ))
     {
      bln_delete_all= true ;
       return ;
     }
//---
   if (!IsPendingOrdersExists())
     {
       if (!RefreshRates())
         return ;
       //---
       double price= iHigh (m_symbol.Name(), PERIOD_D1 , 1 )+ExtMinDistance;
       double sl=(InpStopLoss== 0 )? 0.0 :price-ExtStopLoss;
       double tp=(InpTakeProfit== 0 )? 0.0 :price+ExtTakeProfit;
      PendingBuyStop(price,sl,tp);
       //---
      price= iLow (m_symbol.Name(), PERIOD_D1 , 1 )-ExtMinDistance;
      sl=(InpStopLoss== 0 )? 0.0 :price+ExtStopLoss;
      tp=(InpTakeProfit== 0 )? 0.0 :price-ExtTakeProfit;
      PendingSellStop(price,sl,tp);

      dt_last_delete= iTime (m_symbol.Name(), PERIOD_D1 , 0 );
       return ;
     }
//---
   Trailing();
  }
//+------------------------------------------------------------------+
//| TradeTransaction function                                        |
//+------------------------------------------------------------------+
void OnTradeTransaction ( const MqlTradeTransaction &trans,
                         const MqlTradeRequest &request,
                         const MqlTradeResult &result)
  {
//---
   double res= 0.0 ;
   int losses= 0.0 ;
//--- get transaction type as enumeration value
   ENUM_TRADE_TRANSACTION_TYPE type=trans.type;
//--- if transaction is result of addition of the transaction in history
   if (type== TRADE_TRANSACTION_DEAL_ADD )
     {
       long      deal_ticket       = 0 ;
       long      deal_order        = 0 ;
       long      deal_time         = 0 ;
       long      deal_time_msc     = 0 ;
       long      deal_type         =- 1 ;
       long      deal_entry        =- 1 ;
       long      deal_magic        = 0 ;
       long      deal_reason       =- 1 ;
       long      deal_position_id  = 0 ;
       double    deal_volume       = 0.0 ;
       double    deal_price        = 0.0 ;
       double    deal_commission   = 0.0 ;
       double    deal_swap         = 0.0 ;
       double    deal_profit       = 0.0 ;
       string    deal_symbol       = "" ;
       string    deal_comment      = "" ;
       string    deal_external_id  = "" ;
       if ( HistoryDealSelect (trans.deal))
        {
         deal_ticket       = HistoryDealGetInteger (trans.deal, DEAL_TICKET );
         deal_order        = HistoryDealGetInteger (trans.deal, DEAL_ORDER );
         deal_time         = HistoryDealGetInteger (trans.deal, DEAL_TIME );
         deal_time_msc     = HistoryDealGetInteger (trans.deal, DEAL_TIME_MSC );
         deal_type         = HistoryDealGetInteger (trans.deal, DEAL_TYPE );
         deal_entry        = HistoryDealGetInteger (trans.deal, DEAL_ENTRY );
         deal_magic        = HistoryDealGetInteger (trans.deal, DEAL_MAGIC );
         deal_reason       = HistoryDealGetInteger (trans.deal, DEAL_REASON );
         deal_position_id  = HistoryDealGetInteger (trans.deal, DEAL_POSITION_ID );

         deal_volume       = HistoryDealGetDouble (trans.deal, DEAL_VOLUME );
         deal_price        = HistoryDealGetDouble (trans.deal, DEAL_PRICE );
         deal_commission   = HistoryDealGetDouble (trans.deal, DEAL_COMMISSION );
         deal_swap         = HistoryDealGetDouble (trans.deal, DEAL_SWAP );
         deal_profit       = HistoryDealGetDouble (trans.deal, DEAL_PROFIT );

         deal_symbol       = HistoryDealGetString (trans.deal, DEAL_SYMBOL );
         deal_comment      = HistoryDealGetString (trans.deal, DEAL_COMMENT );
         deal_external_id  = HistoryDealGetString (trans.deal, DEAL_EXTERNAL_ID );
        }
       else
         return ;
       if (deal_symbol==m_symbol.Name() && deal_magic==m_magic)
         if (deal_entry== DEAL_ENTRY_IN )
             if (deal_type== DEAL_TYPE_BUY || deal_type== DEAL_TYPE_SELL )
               DeleteAllPendingOrders();
     }
  }
//+------------------------------------------------------------------+
//| Refreshes the symbol quotes data                                 |
//+------------------------------------------------------------------+
bool RefreshRates( void )
  {
//--- refresh rates
   if (!m_symbol.RefreshRates())
     {
       Print ( "RefreshRates error" );
       return ( false );
     }
//--- protection against the return value of "zero"
   if (m_symbol.Ask()== 0 || m_symbol.Bid()== 0 )
       return ( false );
//---
   return ( true );
  }
//+------------------------------------------------------------------+
//| Pending order of Buy Stop                                        |
//+------------------------------------------------------------------+
void PendingBuyStop( double price, double sl, double tp)
  {
   sl=m_symbol.NormalizePrice(sl);
   tp=m_symbol.NormalizePrice(tp);

   double check_open_long_lot=m_money.CheckOpenLong(m_symbol.Ask(),sl);
   Print ( "sl=" , DoubleToString (sl,m_symbol. Digits ()),
         ", CheckOpenLong: " , DoubleToString (check_open_long_lot, 2 ),
         ", Balance: " ,     DoubleToString (m_account.Balance(), 2 ),
         ", Equity: " ,     DoubleToString (m_account.Equity(), 2 ),
         ", FreeMargin: " , DoubleToString (m_account.FreeMargin(), 2 ));
   if (check_open_long_lot== 0.0 )
     {
       Print ( __FUNCTION__ , ", ERROR: method CheckOpenLong returned the value of \"0.0\"" );
       return ;
     }
//--- check volume before OrderSend to avoid "not enough money" error (CTrade)
   double check_volume_lot=m_trade.CheckVolume(m_symbol.Name(),check_open_long_lot,m_symbol.Ask(), ORDER_TYPE_BUY );
   if (check_volume_lot!= 0.0 )
     {
       if (check_volume_lot>=check_open_long_lot)
        {
         if (m_trade.BuyStop(check_open_long_lot,m_symbol.NormalizePrice(price),
            m_symbol.Name(),m_symbol.NormalizePrice(sl),m_symbol.NormalizePrice(tp)))
           {
             if (m_trade.ResultOrder()== 0 )
              {
               Print ( "#1 Buy Stop -> false. Result Retcode: " ,m_trade.ResultRetcode(),
                     ", description of result: " ,m_trade.ResultRetcodeDescription());
               PrintResultTrade(m_trade,m_symbol);
              }
             else
              {
               Print ( "#2 Buy Stop -> true. Result Retcode: " ,m_trade.ResultRetcode(),
                     ", description of result: " ,m_trade.ResultRetcodeDescription());
               PrintResultTrade(m_trade,m_symbol);
              }
           }
         else
           {
             Print ( "#3 Buy Stop -> false. Result Retcode: " ,m_trade.ResultRetcode(),
                   ", description of result: " ,m_trade.ResultRetcodeDescription());
            PrintResultTrade(m_trade,m_symbol);
           }
        }
       else
        {
         Print ( __FUNCTION__ , ", ERROR: method CheckVolume (" , DoubleToString (check_volume_lot, 2 ), ") " ,
               "< method CheckOpenLong (" + DoubleToString (check_open_long_lot, 2 )+ ")" );
         return ;
        }
     }
   else
     {
       Print ( __FUNCTION__ , ", ERROR: method CheckVolume returned the value of \"0.0\"" );
       return ;
     }
//---
  }
//+------------------------------------------------------------------+
//| Pending order of Sell Stop                                       |
//+------------------------------------------------------------------+
void PendingSellStop( double price, double sl, double tp)
  {
   sl=m_symbol.NormalizePrice(sl);
   tp=m_symbol.NormalizePrice(tp);

   double check_open_short_lot=m_money.CheckOpenShort(m_symbol.Bid(),sl);
   Print ( "sl=" , DoubleToString (sl,m_symbol. Digits ()),
         ", CheckOpenLong: " , DoubleToString (check_open_short_lot, 2 ),
         ", Balance: " ,     DoubleToString (m_account.Balance(), 2 ),
         ", Equity: " ,     DoubleToString (m_account.Equity(), 2 ),
         ", FreeMargin: " , DoubleToString (m_account.FreeMargin(), 2 ));
   if (check_open_short_lot== 0.0 )
     {
       Print ( __FUNCTION__ , ", ERROR: method CheckOpenShort returned the value of \"0.0\"" );
       return ;
     }
//--- check volume before OrderSend to avoid "not enough money" error (CTrade)
   double check_volume_lot=m_trade.CheckVolume(m_symbol.Name(),check_open_short_lot,m_symbol.Bid(), ORDER_TYPE_SELL );
   if (check_volume_lot!= 0.0 )
     {
       if (check_volume_lot>=check_open_short_lot)
        {
         if (m_trade.SellStop(check_open_short_lot,m_symbol.NormalizePrice(price),
            m_symbol.Name(),m_symbol.NormalizePrice(sl),m_symbol.NormalizePrice(tp)))
           {
             if (m_trade.ResultOrder()== 0 )
              {
               Print ( "#1 Sell Stop -> false. Result Retcode: " ,m_trade.ResultRetcode(),
                     ", description of result: " ,m_trade.ResultRetcodeDescription());
               PrintResultTrade(m_trade,m_symbol);
              }
             else
              {
               Print ( "#2 Sell Stop -> true. Result Retcode: " ,m_trade.ResultRetcode(),
                     ", description of result: " ,m_trade.ResultRetcodeDescription());
               PrintResultTrade(m_trade,m_symbol);
              }
           }
         else
           {
             Print ( "#3 Sell Stop -> false. Result Retcode: " ,m_trade.ResultRetcode(),
                   ", description of result: " ,m_trade.ResultRetcodeDescription());
            PrintResultTrade(m_trade,m_symbol);
           }
        }
       else
        {
         Print ( __FUNCTION__ , ", ERROR: method CheckVolume (" , DoubleToString (check_volume_lot, 2 ), ") " ,
               "< method CheckOpenShort (" + DoubleToString (check_open_short_lot, 2 )+ ")" );
         return ;
        }
     }
   else
     {
       Print ( __FUNCTION__ , ", ERROR: method CheckVolume returned the value of \"0.0\"" );
       return ;
     }
//---
  }
//+------------------------------------------------------------------+
//| Print CTrade result                                              |
//+------------------------------------------------------------------+
void PrintResultTrade(CTrade &trade,CSymbolInfo &symbol)
  {
   Print ( "Code of request result: " + IntegerToString (trade.ResultRetcode()));
   Print ( "code of request result as a string: " +trade.ResultRetcodeDescription());
   Print ( "Deal ticket: " + IntegerToString (trade.ResultDeal()));
   Print ( "Order ticket: " + IntegerToString (trade.ResultOrder()));
   Print ( "Volume of deal or order: " + DoubleToString (trade.ResultVolume(), 2 ));
   Print ( "Price, confirmed by broker: " + DoubleToString (trade.ResultPrice(),symbol. Digits ()));
   Print ( "Current bid price: " + DoubleToString (symbol.Bid(),symbol. Digits ())+ " (the requote): " + DoubleToString (trade.ResultBid(),symbol. Digits ()));
   Print ( "Current ask price: " + DoubleToString (symbol.Ask(),symbol. Digits ())+ " (the requote): " + DoubleToString (trade.ResultAsk(),symbol. Digits ()));
   Print ( "Broker comment: " +trade.ResultComment());
  }
//+------------------------------------------------------------------+
//| Is pendinf orders exists                                         |
//+------------------------------------------------------------------+
bool IsPendingOrdersExists( void )
  {
   for ( int i= OrdersTotal ()- 1 ;i>= 0 ;i--) // returns the number of current orders
       if (m_order.SelectByIndex(i))     // selects the pending order by index for further access to its properties
         if (m_order. Symbol ()==m_symbol.Name() && m_order.Magic()==m_magic)
             return ( true );
//---
   return ( false );
  }
//+------------------------------------------------------------------+
//| Delete all pending orders                                        |
//+------------------------------------------------------------------+
void DeleteAllPendingOrders( void )
  {
   for ( int i= OrdersTotal ()- 1 ;i>= 0 ;i--) // returns the number of current orders
       if (m_order.SelectByIndex(i))     // selects the pending order by index for further access to its properties
         if (m_order. Symbol ()==m_symbol.Name() && m_order.Magic()==m_magic)
            m_trade.OrderDelete(m_order.Ticket());
  }
//+------------------------------------------------------------------+
//| Trailing                                                         |
//+------------------------------------------------------------------+
void Trailing()
  {
   if (InpTrailingStop== 0 )
       return ;
   for ( int i= PositionsTotal ()- 1 ;i>= 0 ;i--) // returns the number of open positions
       if (m_position.SelectByIndex(i))
         if (m_position. Symbol ()==m_symbol.Name() && m_position.Magic()==m_magic)
           {
             if (m_position.PositionType()== POSITION_TYPE_BUY )
              {
               if (m_position.PriceCurrent()-m_position.PriceOpen()>ExtTrailingStop+ExtTrailingStep)
                   if (m_position.StopLoss()<m_position.PriceCurrent()-(ExtTrailingStop+ExtTrailingStep))
                    {
                     if (!m_trade.PositionModify(m_position.Ticket(),
                        m_symbol.NormalizePrice(m_position.PriceCurrent()-ExtTrailingStop),
                        m_position.TakeProfit()))
                         Print ( "Modify " ,m_position.Ticket(),
                               " Position -> false. Result Retcode: " ,m_trade.ResultRetcode(),
                               ", description of result: " ,m_trade.ResultRetcodeDescription());
                     RefreshRates();
                     m_position.SelectByIndex(i);
                     PrintResultModify(m_trade,m_symbol,m_position);
                     continue ;
                    }
              }
             else
              {
               if (m_position.PriceOpen()-m_position.PriceCurrent()>ExtTrailingStop+ExtTrailingStep)
                   if ((m_position.StopLoss()>(m_position.PriceCurrent()+(ExtTrailingStop+ExtTrailingStep))) ||
                     (m_position.StopLoss()== 0 ))
                    {
                     if (!m_trade.PositionModify(m_position.Ticket(),
                        m_symbol.NormalizePrice(m_position.PriceCurrent()+ExtTrailingStop),
                        m_position.TakeProfit()))
                         Print ( "Modify " ,m_position.Ticket(),
                               " Position -> false. Result Retcode: " ,m_trade.ResultRetcode(),
                               ", description of result: " ,m_trade.ResultRetcodeDescription());
                     RefreshRates();
                     m_position.SelectByIndex(i);
                     PrintResultModify(m_trade,m_symbol,m_position);
                    }
              }

           }
  }
//+------------------------------------------------------------------+
//| Print CTrade result                                              |
//+------------------------------------------------------------------+
void PrintResultModify(CTrade &trade,CSymbolInfo &symbol,CPositionInfo &position)
  {
   Print ( "Code of request result: " + IntegerToString (trade.ResultRetcode()));
   Print ( "code of request result as a string: " +trade.ResultRetcodeDescription());
   Print ( "Deal ticket: " + IntegerToString (trade.ResultDeal()));
   Print ( "Order ticket: " + IntegerToString (trade.ResultOrder()));
   Print ( "Volume of deal or order: " + DoubleToString (trade.ResultVolume(), 2 ));
   Print ( "Price, confirmed by broker: " + DoubleToString (trade.ResultPrice(),symbol. Digits ()));
   Print ( "Current bid price: " + DoubleToString (symbol.Bid(),symbol. Digits ())+ " (the requote): " + DoubleToString (trade.ResultBid(),symbol. Digits ()));
   Print ( "Current ask price: " + DoubleToString (symbol.Ask(),symbol. Digits ())+ " (the requote): " + DoubleToString (trade.ResultAsk(),symbol. Digits ()));
   Print ( "Broker comment: " +trade.ResultComment());
   Print ( "Price of position opening: " + DoubleToString (position.PriceOpen(),symbol. Digits ()));
   Print ( "Price of position's Stop Loss: " + DoubleToString (position.StopLoss(),symbol. Digits ()));
   Print ( "Price of position's Take Profit: " + DoubleToString (position.TakeProfit(),symbol. Digits ()));
   Print ( "Current price by position: " + DoubleToString (position.PriceCurrent(),symbol. Digits ()));
  }
//+------------------------------------------------------------------+


 

Bonjour, experts, s'il vous plaît aidez-moi à comprendre ce qu'est l'erreur. J'ai connecté l'indicateur depuis le trading view via pinconnector au compte de démonstration mt5. Je ne reçois aucun signal. J'ai joint une capture d'écran de l'écran du journal