The Viper EA MT5
- Asesores Expertos
- Profalgo Limited
- Versión: 2.2
- Actualizado: 7 junio 2023
- Activaciones: 10
Promoción actual:
- Solo queda 1 a 349$
- Precio final: 999$
Bajo riesgo en vivo : https://www.mql5.com/en/signals/1492890
Viper EA utiliza entradas de "reversión a la media" nítidas y efectivas durante el período de rango de las sesiones de negociación (entre las 23h y la 1h GMT+2, horario de verano de EE. UU.).
Estas operaciones ya tienen una tasa de éxito muy alta, pero si el mercado se vuelve en contra de la posición, el EA iniciará su modo de recuperación de marca registrada.
El algoritmo de recuperación intentará convertir cada primera entrada fallida en un resultado rentable.
Este EA se desarrolló usando los resultados en vivo de mis EA anteriores como punto de partida y se optimizó usando 99.99% Tickdata en MT5, usando una comisión de 7$/lote en cada operación.
Ha sido probado con estrés con múltiples "configuraciones aleatorias" para todos los pares y tuvo éxito en todas las pruebas. Esto significa que el riesgo de sobreoptimización se minimiza a casi cero.
Pares admitidos : GBPCAD;GBPCHF;GBPAUD;CHFJPY;AUDCHF;EURCHF;EURUSD;CADCHF;GBPJPY;GBPUSD;AUDCAD;AUDUSD;EURJPY;USDCHF;AUDJPY;USDCAD;EURGBP;EURAUD;EURCAD;
Plazo : M15
Saldo mínimo recomendado : 150$ -> max 4 pares. Para ejecutar los 20 pares, se recomiendan 500 $ o más
Para que AutoGMT y el filtro de noticias funcionen : es importante agregar estas 2 URL a las "URL permitidas" en la configuración de MT4/MT5 (Herramientas -> Opciones -> Expertos):
- https: //ec.forexprostools.com/
- https: //www. worldtimeserver.com/
- (¡quita los espacios!)
Configuración:
- El EA no requiere ningún archivo de configuración para ejecutarse. Todos los pares están preoptimizados y la configuración se almacena internamente.
- Simplemente ejecute el EA en un gráfico EURUSD M15, y luego en los parámetros: habilite OneChartSetup y configure los pares que desea usar.
- Elija un tamaño de lote fijo (AutoLotMode = use StartLots) o un tamaño de lote automático basado en el saldo/equidad (AutoLotMode = use LotsizeStep).
- Al usar los 20 pares -> Bajo riesgo (DD hasta 15%): use LotsizeStep=2000 y un saldo mínimo de 2000$; Riesgo Medio (DD hasta 30%): utilice LotsizeStep=1000 y saldo mínimo de 1000$ ; Alto Riesgo (DD hasta 60%): utilice LotsizeStep=500 y saldo mínimo de 500$. Estos valores se basan en USD. Si está utilizando una moneda base diferente en sus cuentas, convierta estos valores primero.
- También puede ejecutar en una cuenta más pequeña (se recomienda un mínimo de 150 $ cuando se ejecuta un máximo de 4 pares de bajo riesgo) si selecciona solo unos pocos pares para operar.
- Cuando se usan menos pares, es mejor hacer una prueba retrospectiva en MT5 para determinar la reducción máxima y, en base a eso, configurar su LotsizeStep en consecuencia.
Cómo hacer una prueba retrospectiva:
- Se recomienda encarecidamente ejecutar backtests en la plataforma MT5. De esa manera, puede probar toda la cartera a la vez utilizando ticks reales con diferenciales variables. Esto será lo más cerca que pueda llegar a las condiciones comerciales reales en vivo.
- En MT5, ejecute el backtest en EURUSD M15 y habilite OneChartSetup en los parámetros.
- Seleccione la configuración del tamaño del lote (lote fijo o LotsizeStep para el tamaño del lote automático).
- Establezca la calidad de la prueba en "OHLC de 1 minuto" para una prueba más rápida pero bastante confiable o "cada marca basada en marcas reales" para una prueba más confiable.
Configuración del EA:
- "Configuración de EA" -> aquí puede permitir que se muestre el panel de información, ajustar su tamaño, establecer el comentario para las operaciones, establecer el número mágico para el EA, habilitar OneChartSetup y elegir qué pares ejecutar.
- "Tiempos de negociación" -> aquí puede elegir cuándo debe comenzar a operar el EA (solo con respecto a la primera operación, no a las operaciones de recuperación). Recomendado no cambiar esto.
- "Configuración de la primera operación" -> aquí puede establecer el diferencial máximo para la primera operación, así como elegir si desea utilizar órdenes de mercado en lugar de órdenes pendientes y TP virtual o no.
- "Configuración de operaciones de recuperación" -> aquí puede simplemente elegir "usar configuración automática" si desea usar mi configuración optimizada para todos los pares, o configurar todo manualmente para su propia optimización (Conjunto de optimización ) . Explicación más detallada -> haga clic aquí .
- "Filtro de noticias" -> aquí puede habilitar y ajustar el filtro de noticias (solo para la primera operación).
- "Configuración del tamaño del lote" -> Aquí puede configurar el método de cálculo del tamaño del lote.
- "Configuración GMT" -> aquí puede simplemente usar AutoGMT (recomendado) o configurarlo manualmente.
- "Filtro de rollover" -> aquí puede configurar el filtro de rollover para evitar comenzar a operar durante el rollover.
I have been using the bot since the beginning and it generates stable profit. I run it with low risk, news filters on and with JPY pairs and so far I'm very satisfied with its performance.