MQL5 Multisymbol EA using Ichimoku indicator and Efficiency Indicator

Job finished

Execution time 9 days
Feedback from employee
Perfect. Good job.
Feedback from customer
Job was completed perfectly. Great communication and support through the project. Thanks Kyra!

Specification

Helo!

I am looking for an Expert Advisor that will use the Ichimoku indicator and an Efficiency indicator (provided if needed) to open buy/sell market orders

The EA must only open buy/sell orders when the following conditions are met on the closing of the current candlestick or later on the current open timeframe.

The EA must use two timeframes to confirm the buy/sell entry(The currently opened timeframe and an optional higher timeframe).


For Buy condition the following conditions should be met

  1. Candle breaks and closes above the current Kumo. t=0
  2. Bullish Kumo Ahead. t=-26
  3. Chikou Span above the Kumo or above the close of the current bar. t=26
  4. Stop Loss

-

For Sell condition the following conditions should be met

  1. Candle breaks and closes below the current Kumo. t=0
  2. Bearish Kumo Ahead.  t=-26
  3. Chikou Span below the Kumo or below the close of the current bar. t=26
  4. Stop Loss

N.B Another order can only be opened when the current order is closed per pair. Multiple orders can be opened if the pair is different. 

 

ALL PARAMETERS SHOULD BE USER DEFINED(These parameters will be applied to both the currently opened timeframe and the optional higher timeframe):

THE FOLLOWING ADDITIONAL PARAMETERS SHOULD BE USER DEFINED

Take profit = user defined in Ratio of risk

Break even option (partial close) = user defined

Manual Lot site for each trade = user defined

Automatic Lot size(calculated using percentage of equity) = user defined

Magic number for trades

Option to select trade direction(only buy or only sell)

Optional time frame to confirm entry


Responded

1
Developer 1
Rating
Projects
0
0%
Arbitration
1
0% / 100%
Overdue
0
Free
2
Developer 2
Rating
(100)
Projects
125
23%
Arbitration
12
0% / 75%
Overdue
22
18%
Free
3
Developer 3
Rating
(42)
Projects
62
8%
Arbitration
12
58% / 42%
Overdue
1
2%
Free
4
Developer 4
Rating
(294)
Projects
371
21%
Arbitration
43
60% / 23%
Overdue
43
12%
Working
5
Developer 5
Rating
(47)
Projects
68
13%
Arbitration
2
50% / 0%
Overdue
7
10%
Working
6
Developer 6
Rating
(103)
Projects
130
44%
Arbitration
7
43% / 43%
Overdue
7
5%
Free
7
Developer 7
Rating
(22)
Projects
28
11%
Arbitration
6
33% / 50%
Overdue
4
14%
Working
8
Developer 8
Rating
(140)
Projects
203
80%
Arbitration
17
29% / 47%
Overdue
10
5%
Working
9
Developer 9
Rating
(63)
Projects
84
26%
Arbitration
23
22% / 48%
Overdue
23
27%
Free
10
Developer 10
Rating
(563)
Projects
932
47%
Arbitration
301
59% / 25%
Overdue
124
13%
Working
11
Developer 11
Rating
(264)
Projects
538
50%
Arbitration
55
40% / 36%
Overdue
224
42%
Working
12
Developer 12
Rating
(548)
Projects
1330
59%
Arbitration
28
82% / 0%
Overdue
10
1%
Free
13
Developer 13
Rating
(56)
Projects
174
71%
Arbitration
4
100% / 0%
Overdue
1
1%
Free
14
Developer 14
Rating
(375)
Projects
473
40%
Arbitration
82
37% / 33%
Overdue
13
3%
Loaded
15
Developer 15
Rating
(68)
Projects
77
8%
Arbitration
33
9% / 55%
Overdue
6
8%
Working
16
Developer 16
Rating
(116)
Projects
137
36%
Arbitration
15
13% / 67%
Overdue
9
7%
Free
17
Developer 17
Rating
(5)
Projects
8
0%
Arbitration
1
100% / 0%
Overdue
1
13%
Free
18
Developer 18
Rating
(363)
Projects
389
70%
Arbitration
3
100% / 0%
Overdue
2
1%
Working
Similar orders
I have a Gann HiLo indicator on MT4 & MT5. The size of the dots differs greatly. The pictures below show the two versions with the width set to '1' I would like to be able to reduce the size of the dots on the MT5 version to be visually the same size as the MT4 version. I've attached the current MQ5 file for you to edit
Hi, I need a robot, which wil get instructions to trade in 3 symbols at the same time based on few parameters and calculations. Example: There is 1 symbol called Gold-Near and the rate for it is 1000-1002 If i specify that when the rate reaches 1050, it should sell 1 lot Upon execution it will have to sell 1 lot of cme gold, buy 3 lots of mcx gold and buy currently (lots will be based on calculation). All the
Trading bot 300+ USD
We need bot that trades when medium and low impact news hits It will release pending order both directions few min prior to news impact And will have certain risk management strategy attached Example If Monday and Tuesday news successful clears profits It will reduce risk for next news events until new week starts each week message on tg: Dstatewealthtrading NOTE: 4 YAERS OF EXPERIENCE UPWORD, YOU MUST BE A
I need someone the create a supertrend indicator based on Heikin Ashi candles instead of normal candles. Needs to be exactly the same as the supertrend (original one) + ha from tradingview. In m1,m5,m15 the indicator must have the same values ​​found with the tradingview. Work that meets this requirement will be accepted ( depending on the broker and spread, however, a few pips of difference will be accepted)
are you aware of the Monday Range Strategy? https://www.youtube.com/watch?v=7B_yBBFx6z8 5pm EST time sunday - monday 5pm est and it has to be on the H1 chart , minimum 1:2 Risk to reward and break even function after 1:1
Hello, I need someone who have a great experience in ATAS platforms, I use ATAS software for orderflow and i would like tradingview to draw some light information from ATAS to tradingview. If you are capable of this please send me a message and let's proceed
Hi, I have a Live Data feature for my trading accounts that lets me check details like total open positions, number of lots, profits, etc. I need someone to add the number of pending orders to this live data. This is important for me to ensure that all accounts have the same number of pending orders, since I use a copy trading system. Also, there is a website where I check all the data. In this case, you would need
Hello, i am searching for an experienced, professional software engineer, who can convert three Indicators from MQL4 to MQL5. This may sound like an easy job, but one indicator is like a trading system and therefore a bit complex. So you need to have a very good understanding of both languages. You should also be able to code MQL5 classes ( https://www.mql5.com/en/docs/basis/oop ). The intention is to code MQL5
I was looking around for a robot to trade with and came across one that looked like it had some promising results, i would like to optimize the existing robot for even better and more consistent results and convert the mql4 code to mql5 so that i can run it on my live account after testing. I would like the expert to be run on the 5 minute time frame. Note: The robot is based on the martingale system. I have provided
### Summary of EA Requirements 1. **Time Period**: - The EA should operate on the H4 timeframe. 2. **RelicusRoad MACD v2 Indicator**: - **Parameters**: - Fast EMA Period: 12 - Fast EMA Type: Close price - Slow EMA Period: 24 - Slow EMA Type: Close price - Signal SMA Period: 9 - The EA should use this indicator to determine the crossover condition between the MACD line and the signal line. 3

Project information

Budget
50+ USD
For the developer
45 USD
Deadline
from 3 to 10 day(s)