Por que minha EA continua dando lucro negativo quando volta a testar? - página 5

Novo comentário

[Excluído] 2013.02.03 15:37 #41

deVries:

Dê uma olhada no código da Média Móvel EA em sua estação metatrader e veja como ela é feita lá ....

tudo bem

[Excluído] 2013.02.05 03:22 #42

deVries:

Neste momento você tem que verificar se já existe um comércio aberto

antes de abrir um negócio, você tem que saber se há um negócio aberto

ainda não consigo ver que você fez a contagem dos negócios

Dê uma olhada no código da Média Móvel EA em sua estação metatrader e veja como ela é feita lá ....

li muitas amostras e imitei seu estilo de codificação.

este é meu último código. infelizmente, ainda está tendo lucro negativo, o que não deveria ser.

//+------------------------------------------------------------------+
//|                                       RSI_strategy_cyxstudio.mq4 |
//|                                  Copyright 2013, Tjipke de Vries |
//|                                     https://forum.mql4.com/53695/ |
//+------------------------------------------------------------------+
#property copyright "Copyright 2013, MetaQuotes Software Corp."
#property link      "http://www.metaquotes.net"
#include <stderror.mqh>
#include <stdlib.mqh>


extern int RSIPeriod        =  2;      //number of periods for RSI
extern double UpperBound    =  95;     //set upper bound value for RSI
extern double LowerBound    =  5;      //set lower bound value for RSI

extern double Lots  = 0.1;
extern double StopLoss      = 60;       //Set the stop loss level
extern double TakeProfit    = 120;       //Set the take profit level
extern double TrailingStop = 40;
//extra settings for OrderSend
extern int        MagicNumber = 54333;
extern string     CommentEA = "RSI strategy";
extern int        Slippage.Pips    = 10;



//---
//+------------------------------------------------------------------+
//| expert initialization function                                   |
//+------------------------------------------------------------------+
int init()
  {
//----   
  Alert(OrdersTotal());

//----
   return(0);
  }
//+------------------------------------------------------------------+
//| expert deinitialization function                                 |
//+------------------------------------------------------------------+
int deinit()
  {
//----
   
//----
   return(0);
  }
//+------------------------------------------------------------------+
//| expert start function                                            |
//+------------------------------------------------------------------+
int start()
  {
//----
RefreshRates();
   int Ticket1;
   int Ticket2;
   bool Ticket3;
   bool Ticket4;
   
   double SL,TP;
   int Total;
   double MagicNo;
   double Slippage;
    int cnt;
   
   double pAsk = MarketInfo(Symbol(), MODE_ASK);
   double pBid = MarketInfo(Symbol(), MODE_BID);
   double pAskPrev = iClose(Symbol(),0,1);
   double pBidPrev = iClose(Symbol(),0,1);
   double pAskLast = iClose(Symbol(),0,2);
   double pBidLast = iClose(Symbol(),0,2);
   double MA200 = iMA(NULL, 1440, 200, 0,MODE_SMA,PRICE_CLOSE, 0);  //200 day Moving Average   
   double MA5 = iMA(NULL, 1440, 5, 0,MODE_SMA,PRICE_CLOSE, 0);      //  5 day Moving Average
   double CurrentRSI = iRSI (NULL, 0, RSIPeriod,PRICE_CLOSE ,0);
   double PrevRSI =  iRSI (NULL, 0, RSIPeriod,PRICE_CLOSE ,1);
   double LastRSI = iRSI (NULL, 0, RSIPeriod,PRICE_CLOSE ,2);
   
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   
   if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }



//Check for open orders if there are none then check for conditions to open one

      if ((OrdersTotal() ==0) && (LastRSI > PrevRSI) && (PrevRSI > CurrentRSI) && (CurrentRSI < LowerBound) && (pAsk > MA200) && (pAsk < pAskPrev) && (pAskPrev < pAskLast)) {    //Condition to execute buy entry
  
        Ticket1 = OrderSend(Symbol(), OP_BUY, Lots, pAsk, Slippage.Pips, pBid - ( StopLoss * Point ), pBid + ( TakeProfit * Point ), "Buy.", MagicNumber,0,Yellow);       //execute buy order
   
    if(Ticket1>0)
           {
            if(OrderSelect(Ticket1,SELECT_BY_TICKET,MODE_TRADES)) 
               Print("BUY order opened : ",OrderOpenPrice());
            
           }
         if (Ticket1 < 0) {
         Print("Error opening BUY order : ",GetLastError()); 
         return(0); 
   }  
   }
  

  if ((OrdersTotal() ==0) && (LastRSI < PrevRSI) && (PrevRSI < CurrentRSI) && (CurrentRSI > UpperBound) && (pBid < MA200)) {     //Condition to execute sell entry
  
       Ticket2 = OrderSend(Symbol(), OP_SELL, Lots, pBid, Slippage.Pips, pAsk + ( StopLoss * Point ), pAsk - ( TakeProfit * Point ), "Sell.",MagicNumber, 0, Yellow)  ;     //execute sell order
       if(Ticket2>0)
           {
            if(OrderSelect(Ticket2,SELECT_BY_TICKET,MODE_TRADES)) 
               Print("SELL order opened : ",OrderOpenPrice());
           
           }
         if (Ticket2<0) {
          Print("Error opening SELL order : ",GetLastError()); 
         return(0); 
        }
   } 
      
      
 


   
    int ticket=OrderTicket();
    double lots=OrderLots();
   
   
   for (int i = OrdersTotal() - 1; i >= 0; i--)
   {
   
      if (OrderSelect(i, SELECT_BY_POS))
      {
      if ((OrderSymbol() == Symbol()) && (OrderMagicNumber() == MagicNumber) ) {


         if (OrderType() == OP_BUY && pBid > MA5 && (pBid > pBidPrev) && (pBidPrev > pBidLast))
         {
          Ticket3 = OrderClose(ticket, lots, pBid, Slippage.Pips);
          
          if (Ticket3 == true ) {
          Print("BUY position closed", OrderClosePrice());
          }
          if (Ticket3 == false) {
          Print("Error closing BUY position", ErrorDescription(GetLastError()));
          }
          }
      }
   }
   }
   
   
   for (int m = OrdersTotal() - 1; m >= 0; m--)
   {
   
      if (OrderSelect(m, SELECT_BY_POS))
      {
      if ((OrderSymbol() == Symbol()) && (OrderMagicNumber() == MagicNumber)) {


    if (OrderType() == OP_SELL && pAsk < MA5)
          {
          Ticket4 = OrderClose(ticket, lots, pAsk, Slippage.Pips);
           if (Ticket4 == true ) {
          Print("SELL position closed", OrderClosePrice());
          }
          if (Ticket4 == false) {
          Print("Error closing SELL position", ErrorDescription(GetLastError()));
          }
    }
       }
   }
   }
   
        
        
           return(0);
}

você pode me dizer diretamente qual parte está errada?

Perguntas de um "boneco" Perguntas de Iniciantes MQL5 pedidos em aberto com

[Excluído] 2013.02.05 03:27 #43

Eu também tentei isto

//+------------------------------------------------------------------+
//|                                       RSI_strategy_cyxstudio.mq4 |
//|                                  Copyright 2013, Tjipke de Vries |
//|                                     https://forum.mql4.com/53695/ |
//+------------------------------------------------------------------+
#property copyright "Copyright 2013, MetaQuotes Software Corp."
#property link      "http://www.metaquotes.net"
#include <stderror.mqh>
#include <stdlib.mqh>

extern int maxTrades = 1;
extern int RSIPeriod        =  2;      //number of periods for RSI
extern double UpperBound    =  95;     //set upper bound value for RSI
extern double LowerBound    =  5;      //set lower bound value for RSI

extern double Lots  = 0.1;
extern double StopLoss      = 60;       //Set the stop loss level
extern double TakeProfit    = 120;       //Set the take profit level
extern double TrailingStop = 40;
//extra settings for OrderSend
extern int        MagicNumber = 54333;
extern string     CommentEA = "RSI strategy";
extern int        Slippage.Pips    = 10;



//---
//+------------------------------------------------------------------+
//| expert initialization function                                   |
//+------------------------------------------------------------------+
int init()
  {
//----   


//----
   return(0);
  }
//+------------------------------------------------------------------+
//| expert deinitialization function                                 |
//+------------------------------------------------------------------+
int deinit()
  {
//----
   
//----
   return(0);
  }
//+------------------------------------------------------------------+
//| expert start function                                            |
//+------------------------------------------------------------------+
int start()
  {
//----
RefreshRates();
   int Ticket1;
   int Ticket2;
   bool Ticket3;
   bool Ticket4;
   
   double SL,TP;

   double MagicNo;
   double Slippage;
  
   
   double pAsk = MarketInfo(Symbol(), MODE_ASK);
   double pBid = MarketInfo(Symbol(), MODE_BID);
   double pAskPrev = iClose(Symbol(),0,1);
   double pBidPrev = iClose(Symbol(),0,1);
   double pAskLast = iClose(Symbol(),0,2);
   double pBidLast = iClose(Symbol(),0,2);
   double MA200 = iMA(NULL, 1440, 200, 0,MODE_SMA,PRICE_CLOSE, 0);  //200 day Moving Average   
   double MA5 = iMA(NULL, 1440, 5, 0,MODE_SMA,PRICE_CLOSE, 0);      //  5 day Moving Average
   double CurrentRSI = iRSI (NULL, 0, RSIPeriod,PRICE_CLOSE ,0);
   double PrevRSI =  iRSI (NULL, 0, RSIPeriod,PRICE_CLOSE ,1);
   double LastRSI = iRSI (NULL, 0, RSIPeriod,PRICE_CLOSE ,2);
   
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   
   if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }



//Check for open orders if there are none then check for conditions to open one
int ticket;
   int total=CheckOpenTrade(MagicNumber, Symbol());
   
   if(total<maxTrades)
   {
      if ((LastRSI > PrevRSI) && (PrevRSI > CurrentRSI) && (CurrentRSI < LowerBound) && (pAsk > MA200) && (pAsk < pAskPrev) && (pAskPrev < pAskLast)) {    //Condition to execute buy entry
  
        Ticket1 = OrderSend(Symbol(), OP_BUY, Lots, pAsk, Slippage.Pips, pBid - ( StopLoss * Point ), pBid + ( TakeProfit * Point ), "Buy.", MagicNumber,0,Yellow);       //execute buy order
   
    if(Ticket1>0)
           {
            if(OrderSelect(Ticket1,SELECT_BY_TICKET,MODE_TRADES)) 
               Print("BUY order opened : ",OrderOpenPrice());
            
           }
         if (Ticket1 < 0) {
         Print("Error opening BUY order : ",GetLastError()); 
         return(0); 
   }  
   }
  

  if ((OrdersTotal() ==0) && (LastRSI < PrevRSI) && (PrevRSI < CurrentRSI) && (CurrentRSI > UpperBound) && (pBid < MA200)) {     //Condition to execute sell entry
  
       Ticket2 = OrderSend(Symbol(), OP_SELL, Lots, pBid, Slippage.Pips, pAsk + ( StopLoss * Point ), pAsk - ( TakeProfit * Point ), "Sell.",MagicNumber, 0, Yellow)  ;     //execute sell order
       if(Ticket2>0)
           {
            if(OrderSelect(Ticket2,SELECT_BY_TICKET,MODE_TRADES)) 
               Print("SELL order opened : ",OrderOpenPrice());
           
           }
         if (Ticket2<0) {
          Print("Error opening SELL order : ",GetLastError()); 
         return(0); 
        }
   } 
     } 
      
 
double lots=OrderLots();

total=CheckOpenTrade(MagicNumber, Symbol());
   for(int cnt=total-1;cnt>=0;cnt--)
    {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if(   OrderType()<=OP_SELL                      // check for opened position 
         && OrderSymbol()==Symbol()                   // check for symbol
         && OrderMagicNumber() == MagicNumber)        // my magic number
      {



         if (OrderType() == OP_BUY && pBid > MA5 && (pBid > pBidPrev) && (pBidPrev > pBidLast))
         {
          Ticket3 = OrderClose(ticket, lots, pBid, Slippage.Pips);
          
          if (Ticket3 == true ) {
          Print("BUY position closed", OrderClosePrice());
          }
          if (Ticket3 == false) {
          Print("Error closing BUY position", ErrorDescription(GetLastError()));
          }
          }

    if (OrderType() == OP_SELL && pAsk < MA5)
          {
          Ticket4 = OrderClose(ticket, lots, pAsk, Slippage.Pips);
           if (Ticket4 == true ) {
          Print("SELL position closed", OrderClosePrice());
          }
          if (Ticket4 == false) {
          Print("Error closing SELL position", ErrorDescription(GetLastError()));
          }
    }
}
}
   
   

   
   
   
   
   
   
        
        
           return(0);
}


int CheckOpenTrade(int iMN, string sOrderSymbol)
{
   int icnt, itotal, retval;
 
   retval=0;
   itotal=OrdersTotal();
 
      for(icnt=itotal-1;icnt>=0;icnt--) // for loop
      {
         OrderSelect(icnt, SELECT_BY_POS, MODE_TRADES);
         // check for opened position, symbol & MagicNumber
         if (OrderSymbol()== sOrderSymbol)
         {
            if (OrderMagicNumber()==iMN) 
               retval++;             
         } // sOrderSymbol
      } // for loop
 
   return(retval);
}

Tjipke de Vries 2013.02.05 08:56 #44

cyxstudio:

li muitas amostras e imitei seu estilo de codificação.

este é meu último código. infelizmente, ainda está tendo lucro negativo, o que não deveria ser.

você pode me dizer diretamente qual parte está errada?

Eu disse o que estava errado, não fui suficientemente claro ??

você fez mudanças no código que eu lhe dei

suas mudanças nessa parte estão todas erradas e eu escrevi antes onde estava errado.

//+------------------------------------------------------------------+
//|                                       RSI_strategy_cyxstudio.mq4 |
//|                                  Copyright 2013, Tjipke de Vries |
//|                                     https://forum.mql4.com/53695/ |
//+------------------------------------------------------------------+
#property copyright "Copyright 2013, MetaQuotes Software Corp."
#property link      "http://www.metaquotes.net"


extern int RSIPeriod        =  3;      //number of periods for RSI
extern double UpperBound    =  90;     //set upper bound value for RSI
extern double LowerBound    =  5;      //set lower bound value for RSI
extern int MASlowPeriod     = 200;
extern int MAFastPeriod     = 5;
extern double Lots  = 0.1;
extern double StopLoss      = 60;       //Set the stop loss level
extern double TakeProfit    = 120;       //Set the take profit level
extern double TrailingStop = 40;
//extra settings for OrderSend
extern int        MagicNumber = 54333;
extern string     CommentEA = "RSI strategy";
extern int        Slippage.Pips    = 3;


int    BUYS=1,SELLS=1;
//++++ These are adjusted for 5 digit brokers.
int     pips2points;      // slippage  3 pips    3=points    30=points
double  pips2dbl;         // Stoploss 15 pips    0.015      0.0150
int     Digits.pips;      // DoubleToStr(dbl/pips2dbl, Digits.pips)
//---
//+------------------------------------------------------------------+
//| expert initialization function                                   |
//+------------------------------------------------------------------+
int init()
  {
//----   
   if(Digits % 2 == 1)  // DE30=1/JPY=3/EURUSD=5 forum.mql4.com/43064#515262
     {pips2dbl = Point*10; pips2points = 10;   Digits.pips = 1;}
     else {pips2dbl = Point;    pips2points =  1;   Digits.pips = 0;}
     // OrderSend(... Slippage.Pips * pips2points, Bid - StopLossPips * pips2dbl        
//----      

//----
   return(0);
  }
//+------------------------------------------------------------------+
//| expert deinitialization function                                 |
//+------------------------------------------------------------------+
int deinit()
  {
//----
   
//----
   return(0);
  }
//+------------------------------------------------------------------+
//| expert start function                                            |
//+------------------------------------------------------------------+
int start()
  {
//----
   int Ticket;
   double SL,TP;
   int Total;
   
   double pAsk = MarketInfo(Symbol(), MODE_ASK);
   double pBid = MarketInfo(Symbol(), MODE_BID);
   double MA200 = iMA(NULL, 1440, MASlowPeriod, 0,MODE_SMA,PRICE_CLOSE, 0);  //200 day Moving Average   
   double MA5 = iMA(NULL, 1440, MAFastPeriod, 0,MODE_SMA,PRICE_CLOSE, 0);      //  5 day Moving Average
   double CurrentRSI = iRSI (NULL, 1440, RSIPeriod,PRICE_CLOSE ,0);
   
   
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   
   if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }


   if(OrdersTotal()<1)
        {
         BUYS=0;
         SELLS=0;
        } 


   if(BUYS>0||SELLS>0)    //condition start   LOOP FOR CHECKING TRADES THIS EA                     
    {
     BUYS=0;
     SELLS=0;             //RESET VALUES TO ZERO BEFORE START COUNTING
     for(int i = OrdersTotal()-1; i >= 0 ; i--) 
     {
      if(OrderSelect(i,SELECT_BY_POS,MODE_TRADES)==false)        break;
      if(OrderMagicNumber()!=MagicNumber || OrderSymbol()!=Symbol()) continue;
      //.
      //.
      //---- check order type
      if(OrderType()==OP_BUY)  // <==  IMPORTANT FUNCTION TO KNOW WHAT KIND OF TRADE IS SELECTED
        {
         BUYS++;           //COUNT BUY TRADES
         //.
         if(pAsk > MA5) {OrderClose(OrderTicket(),OrderLots(),OrderClosePrice(),Slippage.Pips*pips2points,White);}
        }
 
      if(OrderType()==OP_SELL)
        {
         SELLS++;           //COUNT SELL TRADES
         //.
         if(pBid < MA5) {OrderClose(OrderTicket(),OrderLots(),OrderClosePrice(),Slippage.Pips*pips2points,White);}
        }
     }
    }

// MAKE PART FOR OPENING BUY TRADE            
..........          

//----
   return(0);
  }
//+------------------------------------------------------------------+

Há mais dentro do laço que eu dou mais tarde

Depois do loop fazer a parte para abrir negócios de compra...

// MAKE PART FOR OPENING BUY TRADE

tem que trabalhar para corretores de 4/5 dígitos e tem que trabalhar para contas ECN

Eu gosto de ver

Você muda este código original que você tinha

    if (CurrentRSI < LowerBound && MarketInfo(Symbol(), MODE_ASK) > MA200 ) 
       {    //Condition to execute buy entry
        Ticket = OrderSend(Symbol(), OP_BUY, BuyVolume, Ask, 3, Bid - ( StopLoss * Point ), Ask + ( TakeProfit * Point ), "Buy.", 111,0,Yellow)   ;       //execute buy order
   
        if(Ticket>0)
           {
            if(OrderSelect(Ticket,SELECT_BY_TICKET,MODE_TRADES)) 
               Print("BUY order opened : ",OrderOpenPrice());
           }
         if (Ticket < 0) 
           {
            Print("Error opening BUY order : ",GetLastError()); 
            return(0); 
           }
         return(0);
        }

tem que trabalhar para corretores de 4/5 dígitos e tem que trabalhar para contas ECN

Firebird v63G Quaisquer perguntas de recém-chegados Aprenda a ganhar dinheiro

1 2 3 4 5

Novo comentário