//+------------------------------------------------------------------+//| MACD Sample.mq4 |//| Copyright 2005-2014, MetaQuotes Software Corp. |//| http://www.mql4.com |//+------------------------------------------------------------------+#property copyright"2005-2014, MetaQuotes Software Corp."#property link"http://www.mql4.com"inputdouble TakeProfit =2190;
inputdouble Lots =0.5;
inputdouble TrailingStop =650;
inputint OpenLevel =70;
inputint CloseLevel=23;
inputintPeriod =86;
inputint Period1 =87;
int LastBars=0;
externint Magic1 = 110721;
//+------------------------------------------------------------------+//| |//+------------------------------------------------------------------+voidOnTick(void)
{
int cnt,ticket,total;
//---// initial data checks// it is important to make sure that the expert works with a normal// chart and the user did not make any mistakes setting external // variables (Lots, StopLoss, TakeProfit, // TrailingStop) in our case, we check TakeProfit// on a chart of less than 100 bars//---//--- Trade only if new bar has arrivedif(LastBars!=Bars) LastBars=Bars;
elsereturn(0);
if(Bars<100)
{
Print("bars less than 100");
return;
}
if(TakeProfit<10)
{
Print("TakeProfit less than 10");
return;
}
//--- to simplify the coding and speed up access data are put into internal variablesif(CountOrders("", -1,Magic1)<1)
total=OrdersTotal();
if(total<1)
{
//--- no opened orders identifiedif(AccountFreeMargin()<(1000*Lots))
{
Print("We have no money. Free Margin = ",AccountFreeMargin());
return;
}
//--- check for long position (BUY) possibilityif(iRSI(NULL,0,OpenLevel,PRICE_LOW,Period)>iRSI(NULL,0,CloseLevel,PRICE_HIGH,Period1))
{
ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,Bid-TakeProfit*Point,Bid+TakeProfit*Point,"GBPCADD",Magic1,0,Green);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES))
Print("BUY order opened : ",OrderOpenPrice());
}
elsePrint("Error opening BUY order : ",GetLastError());
return;
}
//--- check for short position (SELL) possibilityif(iRSI(NULL,0,OpenLevel,PRICE_LOW,Period1)<iRSI(NULL,0,CloseLevel,PRICE_HIGH,Period))
{
ticket=OrderSend(Symbol(),OP_SELL,Lots,Bid,3,Ask+TakeProfit*Point,Ask-TakeProfit*Point,"GBPCADD",Magic1,0,Red);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES))
Print("SELL order opened : ",OrderOpenPrice());
}
elsePrint("Error opening SELL order : ",GetLastError());
}
//--- exit from the "no opened orders" blockreturn;
}
//--- it is important to enter the market correctly, but it is more important to exit it correctly... for(cnt=0;cnt<total;cnt++)
{
if(!OrderSelect(cnt,SELECT_BY_POS,MODE_TRADES))
continue;
if(OrderType()<=OP_SELL && // check for opened position
OrderSymbol()==Symbol()&& OrderMagicNumber()==Magic1) // check for symbol
{
//--- long position is openedif(OrderType()==OP_BUY)
{
//--- should it be closed?if(iRSI(NULL,0,OpenLevel,PRICE_LOW,Period1)<iRSI(NULL,0,CloseLevel,PRICE_HIGH,Period))
{
//--- close order and exitif(!OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet))
Print("OrderClose error ",GetLastError());
return;
}
//--- check for trailing stopif(TrailingStop>0)
{
if(Bid-OrderOpenPrice()>Point*TrailingStop)
{
if(OrderStopLoss()<Bid-Point*TrailingStop)
{
//--- modify order and exitif(!OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green))
Print("OrderModify error ",GetLastError());
return;
}
}
}
}
else// go to short position
{
//--- should it be closed?if(iRSI(NULL,0,OpenLevel,PRICE_LOW,Period)>iRSI(NULL,0,CloseLevel,PRICE_HIGH,Period1))
{
//--- close order and exitif(!OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet))
Print("OrderClose error ",GetLastError());
return;
}
//--- check for trailing stopif(TrailingStop>0)
{
if((OrderOpenPrice()-Ask)>(Point*TrailingStop))
{
if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0))
{
//--- modify order and exitif(!OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red))
Print("OrderModify error ",GetLastError());
return;
}
}
}
}
}
}
//---
}
//+------------------------------------------------------------------+//+----------------------------------------------------------------------------+//| Подсчет ордеров |//+----------------------------------------------------------------------------+//| -1 - Все типы ордеров |//| 0 - ордера типа BUY |//| 1 - ордера типа SELL |//| 2 - ордера типа BUYLIMIT |//| 3 - ордера типа SELLLIMIT |//| 4 - ордера типа BUYSTOP |//| 5 - ордера типа SELLSTOP |//+----------------------------------------------------------------------------+int CountOrders(string symb="", int or_ty=-1, int magiс=-1)
{
int cnt=0;
if(symb=="0") symb=_Symbol;
for(int pos=OrdersTotal()-1;pos>=0;pos--)
{
if(OrderSelect(pos,SELECT_BY_POS)==true)
{
if((OrderSymbol()==symb || symb=="")&&(or_ty<0 || or_ty==OrderType()))
{
if(magiс<0 || OrderMagicNumber()==magiс) cnt++;
}
}
}
return(cnt);
}
Включение файлов (#include) - Препроцессор - Основы языка - Справочник MQL5 - Справочник по языку алгоритмического/автоматического трейдинга для MetaTrader 5
これは正しいことなのでしょうか?
これは正しいことなのでしょうか?
ありがとうございます。 複雑なので、2、3行でシンプルにしました。
ありがとうございます。 複雑なので、2、3行でシンプルにしました。
かどうか興味深い
for(i=k; i>=0;i--){。
if(OrderSelect(i,SELECT_BY_POS,MODE_TRADES)){
if(OrderSymbol()==Symbol())とする。{
if(OrderMagicNumber()==マジック) {
{ if(OrderType()>1) continue;
if(OrderType()==OP_BUY || OrderType()==OP_SELL) total++;
}}}}
//---
// total=OrdersTotal()。
if(total<1)
{
皆さん、こんにちは。私はロボットの中で同じ関数をよく使うので、自分自身の関数ライブラリを作りたいと思いました。私はすべて正しいことをした。ライブラリを作成し、Librariesフォルダに入れ、#importを使ってインジケーターにプラグインしました。
#import "andylib.ex4"。
bool KeyPr (long l, string k)。
文字列 TestFunc ();
#インポート
ライブラリ内の指定された関数とその説明。しかし、ライブラリからの関数は呼び出されない。ダイアログをインジケーターのフォルダに入れたり、ダイアログと関連するインジケーターがある場所に直接入れてみたりしましたが、結果はダメでした。何が問題なのでしょうか?
皆さん、こんにちは。私はロボットの中で同じ関数をよく使うので、自分自身の関数ライブラリを作りたいと思いました。私はすべて正しいことをした。ライブラリを作成し、Librariesフォルダに入れ、#importを使ってインジケーターにプラグインしました。
#import "andylib.ex4"。
bool KeyPr (long l, string k)。
文字列 TestFunc ();
#インポート
ライブラリ内の指定された関数とその説明。しかし、ライブラリからの関数は呼び出されない。ダイアログをインジケーターのフォルダに入れたり、ダイアログに接続するインジケーターと同じフォルダに直接入れてみたりしましたが、結果はダメでした。何が問題なのでしょうか?
含む
for(i=k; i>=0;i--){。
if(OrderSelect(i,SELECT_BY_POS,MODE_TRADES)){
if(OrderSymbol()==Symbol())とする。{
if(OrderMagicNumber()==マジック) {
{ if(OrderType()>1) continue;
if(OrderType()==OP_BUY || OrderType()==OP_SELL) total++;
}}}}
//---
// total=OrdersTotal()。
if(total<1)
{
あなたが書いたものは、うまくいくはずがありません。
まず "total++"を計算し、ゼロアウトして "OrdersTotal()"、つまりすべての注文を設定します。
皆さん、こんにちは。私はロボットの中で同じ関数をよく使うので、自分自身の関数ライブラリを作りたいと思いました。私はすべて正しいことをした。ライブラリを作成し、Librariesフォルダに入れ、#importを使ってインジケーターにプラグインしました。
#import "andylib.ex4"。
bool KeyPr (long l, string k)。
文字列 TestFunc ();
#インポート
ライブラリ内の指定された関数とその説明。しかし、ライブラリからの関数は呼び出されない。ダイアログをインジケーターのフォルダに入れたり、ダイアログに接続するインジケーターと同じフォルダに直接入れてみたりしましたが、結果はダメでした。何が問題なのでしょうか?
ライブラリの関数名の後にexportと書いたのを覚えていますか?
さらに良い方法は、ライブラリを作らず、クラスがなくても関数のある.mqhファイルを作り、コンパイルは必要な関数だけを取り、EA/インジケータから呼ばれるようにすることです。