Breaking through the morning flat - which pairs? - page 3

 

Fixed the redraw. Everything should work fine.

Parameters:

Nlin - minimum length of the lin. regression channel in bars

r0 - maximum double channel width in points

t0 - target relative to the channel width

useClose - if true - closing prices are used, if not - High/Low

Nbars - depth of bar history for indicator calculation

 
baltik >>:

Надо Юру Зайцева https://www.mql5.com/ru/users/yuraz найти его любимая тема

пробоя утреннего флета EURUSD

В свое время писал даже индикатор который в верхнем левом углу выставлял разницу валют мз списка к доллару

Стратегия основывалась на фиксации данных до начала европейскрй после окончания азиатсякой

сессии по парам через USD если бакс падал был в красной зоне

то скорее всего пробитие максимума пред дня если доллар в зеленой зоне т.е расчет ко всем валютам

пробитие минимума пред дня

Если ни чего не путая то так

https://www.mql5.com/ru/forum/116916

https://www.mql5.com/ru/forum/107695

а вот сдесь даже куча индикаторов

https://www.mql5.com/ru/forum/116916/page4#163652


Thank you!

YuraZ has read the YuraZ thread, but it wouldn't hurt to refresh it. I'll have a look at the indicators.

 
The idea, of course, is not new, but compared to the breakdown of the morning flat, the difference is that any sufficiently narrow channel is broken, which works for example when changing the trend at the beginning of the American session. I.e. the channel may be heavily sloped.
 
Check out the advisor to this BEAUTIFUL indicator
Files:
 
The indicator is good, the idea is great! The only question is how to come up with an algorithm that determines whether it is a true or false breakout. So far nothing better comes to mind than placing a couple of stop orders at a certain distance from the Close of a breakout candlestick, because there are too many false-breaks.
 
khorosh >>:
Индикатор хороший, идея отличная! Только вот как бы придумать алгоритм определяющий истинный это пробой или ложный. Пока ничего лучшего в голову не приходит кроме как ставить пару стоповых ордеров на каком-то расстоянии от Close пробойной свечи, так как уж слишком много ложных пробоев.

You could try using a 1-2-3 pattern. And becomes only on a breakdown of the 1st high or high. I have shown in the screenshot approximately.

 
Necron >>:

Можно попробовать использовать паттерн 1-2-3. И становится только на пробое 1-го максимума или максимума. Я показал на скриншоте примерно.



Yeah, it's all coming together!

I'm wondering how to attach a 1-2-3 to my indicator myself.

 
Dserg >>:


Ага, мысли сходятся!

Сам думаю, как к моему индикатору 1-2-3 прикрутить.

Here's an indicator I found in mine. It's done by fractals on the current time frame. It can be done here as well. Or by low timeframe, searching for the minimum fractal for the time interval.

Files:
fzr.zip  3 kb
 
Doing good work, comrades, how can I help? Do you want to get out of the way?
 

Here's an idea for an owl on the last thing I saw

Put two pendants on the "end" of the channel

1. A simple example, the pendent triggered - the price went exactly where it was supposed to go

2. 2 pending orders triggered - but it's not a dead end here either; please read this and it will work easily if calculated appropriately

Closing of opposite positions
An opposite position is considered as an opposite position for the same instrument. If there is one or more opposite positions, the position can be closed with the opposite position. To do so, first open the "Order" window (see above for opening methods). Then, in the "Type" field, select "Close by Matching Position". A list of all opposite positions will appear at the bottom of the window. A matching position must be selected in the list, and the "Close..." button is activated. This allows you to close two positions simultaneously. If the opposite positions have different lot sizes, only one remains open. The volume of this position (number of lots) will be equal to the difference in lots of the closed positions, and its direction and the opening price (short or long) will be equal to the greater (by volume) of the positions being closed.

"Bythis you mean that if you have an open position, i.e. a long position for both buying and selling of the same asset - for example buy 1 lot and sell 1 lot, you will lose the spread in 2 lots when you close those positions. If you close these positions counter - then you only lose the spread for 1 lot and for the second lot it comes back. "

3. what to screw 1-2-3 or ZZ direction checking would no longer be particularly important