Fragen von Neueinsteigern zu MQL4 und MQL5, Hilfe und Diskussion über Algorithmen und Codes

Alexander Avksentyev 2021.12.15 14:49 #18161

Tretyakov Rostyslav #:

Was steht im Logbuch?

Wo sind die //--- Eingabeparameter?

#property strict

string            _0_                = "Test";
extern string     _1_                = " МАРТИН 1 - вкл. 2 - выкл.";
extern int        _2_                = 1;
extern string     _3_                = "множитель след. лота";
extern double  LotMultiplikator      = 1.667;
extern string     _4_                = "начальный лот:";
extern string     _5_                = "true - постоянный, false - от баланса";
extern bool    LotConst_or_not       = FALSE;
extern double  Lot                   = 0.01;
extern double  RiskPercent           = 30.0;
extern string     _6_                = "прибыль в пунктах - ТР";
input int     iTakeProfit           = 10;  //TakeProfit;
extern string     _7_                = "настройки трейлинга";
input int     iTrailStart           = 10;  //Кол-во пунктов для включения тралa;
input int     iTrailDist            = 10;  //Расстояние от стопа до рынка;
input int     iTrailStep            = 10;  //Шаг трейлинг стопа";
input int     iTrailTakeProfit      = 10;  //TakeProfit после включения трейлинга";
extern string     _8_                = "расстояние м/у ордерами";
input int     iStep                 = 10;  //Шаг;
extern double  StepCoef              = 1.5; //Множитель шага между ордерами";
extern string     _9_                = "МАX кол-во ордеров";
input  int     MaxTrades             = 30;
extern string     _10_               = "Ограничение потерь";
extern bool    UseEquityStop         = FALSE;
extern double  TotalEquityRisk       = 20.0;
extern string     _11_               = "Идентификатор ордера";
extern int      Magic                = 12345;
extern string     _12_               = "логотип и вывод данных";
extern bool    ShowTableOnTesting    = TRUE;
extern string     _13_               = "(true-вкл.,false-выкл.)";
extern int     iSlippage             = 5;
extern int     MinOrders             = 1000; //АвтоРассчётЛота;
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Woher kommt der Input?

Wo ist extern

Verstehen Sie den Unterschied.

Tretyakov Rostyslav 2021.12.15 14:57 #18162

Alexander Avksentyev #:

Irgendwo eingeben

Wo ist extern

Verstehen Sie den Unterschied.

Eine Datei anhängen. Ich habe keine Lust, Puzzles zusammenzusetzen.

Alexander Avksentyev 2021.12.15 15:13 #18163

//+------------------------------------------------------------------+
//|                                                         Cova.mq4 |
//|                        Copyright 2019, MetaQuotes Software Corp. |
//|                                             https://www.mql5.com |
//+------------------------------------------------------------------+
#property copyright "Copyright 2019, MetaQuotes Software Corp."
#property link        " https://www.mql5.com "
#property version    "1.00"
#property strict

string             _0_                = "Test" ;
extern string      _1_                = " МАРТИН 1 - вкл. 2 - выкл." ;
extern int         _2_                = 1 ;
extern string      _3_                = "множитель след. лота" ;
extern double   LotMultiplikator      = 1.667 ;
extern string      _4_                = "начальный лот:" ;
extern string      _5_                = "true - постоянный, false - от баланса" ;
extern bool     LotConst_or_not       = FALSE;
extern double   Lot                   = 0.01 ;
extern double   RiskPercent           = 30.0 ;
extern string      _6_                = "прибыль в пунктах - ТР" ;
input int      iTakeProfit           = 10 ;   //TakeProfit;
extern string      _7_                = "настройки трейлинга" ;
input int      iTrailStart           = 10 ;   //Кол-во пунктов для включения тралa;
input int      iTrailDist            = 10 ;   //Расстояние от стопа до рынка;
input int      iTrailStep            = 10 ;   //Шаг трейлинг стопа";
input int      iTrailTakeProfit      = 10 ;   //TakeProfit после включения трейлинга";
extern string      _8_                = "расстояние м/у ордерами" ;
input int      iStep                 = 10 ;   //Шаг;
extern double   StepCoef              = 1.5 ; //Множитель шага между ордерами";
extern string      _9_                = "МАX кол-во ордеров" ;
input    int      MaxTrades             = 30 ;
extern string      _10_               = "Ограничение потерь" ;
extern bool     UseEquityStop         = FALSE;
extern double   TotalEquityRisk       = 20.0 ;
extern string      _11_               = "Идентификатор ордера" ;
extern int       Magic                = 12345 ;
extern string      _12_               = "логотип и вывод данных" ;
extern bool     ShowTableOnTesting    = TRUE;
extern string      _13_               = "(true-вкл.,false-выкл.)" ;
extern int      iSlippage             = 5 ;
extern int      MinOrders             = 1000 ; //АвтоРассчётЛота;
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//

int       Login = 4950287 ;
datetime time  = D'2022.01.01 00:00:00' ;
string    name  = "AutoP_v.3.0" ;
datetime time1 = 0 ;
double    TP, lastlot, minlot;
int       Forder;
int       TakeProfit,TrailStart,TrailDist,TrailStep,TrailTakeProfit,Step,Slippage;
double    level_count= 0 ;
int iDistTrail = iTrailDist;
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
//Torder-Цена открытия первого ордера
//+------------------------------------------------------------------+
//| Expert initialization function                                   |
//+------------------------------------------------------------------+
int OnInit ()
{
     if (AccountNumber() != Login)
       {
         int close = MessageBox ( "Неверный номер счёта" , "Ошибка" , MB_OK | MB_ICONSTOP );
         return ( INIT_FAILED );
       } else (AccountNumber() == Login);
             {
               int close = MessageBox ( "Проверка прошла успешно.Экcперт может приступить к работе." , "Инициализация" , MB_OK | MB_ICONEXCLAMATION );
             }
 //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//  
     if ( TimeCurrent () > time)
        {
         int close = MessageBox ( "Время работы закончилось!!!" , "Время работы" , MB_OK | MB_ICONSTOP );
         return ( INIT_FAILED );
        } else ( TimeCurrent () < time);
             {
               int close = MessageBox ( "Проверка времени работы прошла успешно.Эксперт может приступить к работе!" , "Время работы" , MB_OK | MB_ICONEXCLAMATION );
             }
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
      TakeProfit         =iTakeProfit;
      TrailStart         =iTrailStart;
      TrailDist          =iTrailDist;
      TrailStep          =iTrailStep;
      TrailTakeProfit    =iTrailTakeProfit;
      Step               =iStep;
      Slippage           =iSlippage;
      
 //xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//   
     if ( Digits == 3 || Digits == 5 )
       {
        TakeProfit      *= 10 ;
        TrailStart      *= 10 ;
        TrailDist       *= 10 ;
        TrailStep       *= 10 ;
        TrailTakeProfit *= 10 ;
        Step            *= 10 ;
        Slippage        *= 10 ;
       }
       return ( INIT_SUCCEEDED );
    }
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
//+------------------------------------------------------------------+
//| Expert deinitialization function                                 |
//+------------------------------------------------------------------+
void OnDeinit ( const int reason)
  {
//---
   
  }
//+------------------------------------------------------------------+
//| Expert tick function                                             |
//+------------------------------------------------------------------+

void OnTick ()
  {
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
 /*  Comment( 
  "\n",                      name,
  "\n", 
  " ",                       Symbol(),  
  "\n",
  "Тайм Фрейм ",             Period(),
  "\n",                      AccountCompany(),
  "\n",
  "\n ",                     AccountServer(),
  "\n", 
  "Lots\n",                  B_S_Lot(),
  "\n",
  "Price ",                  Bid,
  "\n", 
  "Дата ",                   TimeToString( TimeCurrent(), TIME_DATE ),
  "\n",
  "Server Time ",            TimeToString( TimeCurrent(), TIME_SECONDS ),
  "\n", 
  "Profit ",                 Profit(),
  "\n",
  "AvTP ",                   CalcTP (),
  "\n", 
  "Количество ордеров ",     CountTrades(),
  "\n",
  "\n ",                     GetVolumeLotLastOrder(),
  "\n",
  "\n", "Процент просадки ", NormalizeDouble(  (AccountInfoDouble(ACCOUNT_BALANCE)-AccountInfoDouble(ACCOUNT_MARGIN_FREE))/AccountInfoDouble(ACCOUNT_BALANCE)*100,2)
  );*/ 
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
   double body = Close[ 1 ] - Open[ 1 ];
   if (CountTrades() == 0 && body > 0 ) BuyOpen();     // Если нет открытых и сигнал бай
   if (CountTrades() == 0 && body < 0 ) SellOpen();     // Если нет открытых и сигнал селл
   if (CountTrades( 0 ) > 0 && body > 0 ) BuyOpen();     // Если есть открытые бай и сигнал бай
   if (CountTrades( 1 ) > 0 && body < 0 ) SellOpen();     // Если есть открытые селл и сигнал селл
   if (iTrailStart<MarketInfo( Symbol (),MODE_STOPLEVEL))
 /*  iTrailStart= MarketInfo(Symbol(), MODE_STOPLEVEL * Point);
   iTrailSL();
 */ 
   if (iDistTrail<MarketInfo( Symbol (),MODE_STOPLEVEL))
   iDistTrail = MarketInfo( Symbol (),MODE_STOPLEVEL);
  }
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
void BuyOpen() //Открытие позиции Buy
  {
   Forder = ( OrderSend ( _Symbol ,OP_BUY,Lot,Ask,iSlippage, 0 , 0 , "Коммент" ,Magic, 0 ,Blue));
   if (Forder > 0 )
     {
       Print ( "Открыта Позиция BUY" );
       if ( OrderSelect (Forder, SELECT_BY_TICKET))
        {
         TP = NormalizeDouble ((Ask+iTakeProfit* _Point ), _Digits );
         if (OrderModify(OrderTicket(),OrderOpenPrice(), 0 ,TP, 0 ))
             Print ( "Ордер Модифицирован BUY " ); 
         else 
             Print ( "Ошибка Модификации Ордера BUY = " , GetLastError ());
        }
     }
   else Print ( "Ошибка Открытия Позиции BUY" );
  }
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
void SellOpen() //Открытие позиции Sell  
  {
   Forder = ( OrderSend ( _Symbol ,OP_SELL,Lot,Bid,iSlippage, 0 , 0 , "Коммент Sell" ,Magic, 0 ,Red));
   if (Forder > 0 )
     {
       Print ( "Открыта Позиция SELL" );
       if ( OrderSelect (Forder, SELECT_BY_TICKET))
        {
         TP = NormalizeDouble ((Bid-iTakeProfit* _Point ), _Digits );
         if (OrderModify(OrderTicket(),OrderOpenPrice(), 0 ,TP, 0 ))
             Print ( "Ордер Модифицирован SELL " ); 
         else 
             Print ( "Ошибка Модификации Ордера SELL = " , GetLastError ());
        }
     }
   else Print ( "Ошибка Открытия Позиции SELL" );
  }
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
//+------------------------------------------------------------------+
//| Tester function                                                  |
//+------------------------------------------------------------------+
double OnTester ()
  {
//---
   double ret= 0.0 ;
//---

//---
   return (ret);
  }
//+------------------------------------------------------------------+
//+------------------------------------------------------------------+
//| Подсчет открытых ордеров по типу                                 |
//+------------------------------------------------------------------+
int CountTrades( int ot=- 1 ) 
  {
   int cnt= 0 ;
   int i= OrdersTotal ()- 1 ;
   for ( int pos=i;pos>= 0 ;pos--)
     {
       if ( OrderSelect (pos,SELECT_BY_POS,MODE_TRADES))
        {
         if (OrderSymbol()== _Symbol )
           {
             if (OrderMagicNumber()==Magic)
              {
               if (OrderType()==ot||ot==- 1 ) cnt++;
              }
           }
        }
     }
   return (cnt);
  }
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
//+----------------------------------------------------------------------------+
//|                             Трейлинг стоп                                  |//off
//+----------------------------------------------------------------------------+
/*void iTrailSL()
{
   if (iTrailStart <= 0.0 || iTrailStep <= 0.0)
      return; 
      
   double sl_lev;
         
   for (int i = OrdersTotal() - 1; i >= 0; i--)
   {
      if(!OrderSelect(i, SELECT_BY_POS,MODE_TRADES))
         continue;
      
      if (OrderSymbol() != Symbol() || OrderMagicNumber() != Magic)
         continue;  
         
      if(OrderType() == OP_BUY) 
      {
         if (NormalizeDouble(Bid - OrderOpenPrice(),Digits) < iTrailStart * MarketInfo(Symbol(),MODE_POINT) )
            continue;

         if (OrderStopLoss() >= OrderOpenPrice() || NormalizeDouble(Bid - OrderStopLoss(), Digits()) < iTrailDist * MarketInfo(Symbol(),MODE_POINT))
            continue;

         if (OrderStopLoss() == 0.0 || NormalizeDouble((Bid - OrderStopLoss()) - iTrailDist * MarketInfo(Symbol(),MODE_POINT),Digits) < iTrailStep * MarketInfo(Symbol(),MODE_POINT))
            continue;

         sl_lev = Bid - iTrailDist * MarketInfo(Symbol(),MODE_POINT);
         if (NormalizeDouble(Bid - sl_lev,Digits) < MarketInfo(Symbol(),MODE_STOPLEVEL))
            continue;
            
         if (!OrderModify(OrderTicket(), OrderOpenPrice(), sl_lev, OrderTakeProfit(), 0, clrRed))
            Print("Не удалось модифицировать стоплосс ордера №",OrderTicket(),". Ошибка: ",GetLastError());
      }

      /*if(OrderType() == OP_SELL)
             {
              if(OrderProfit() + OrderSwap() + OrderCommission() > MarketInfo(Symbol(), MODE_TICKVALUE) * iTrailStart * OrderLots())return;
                {
                 if(NormalizeDouble((OrderProfit() - Ask),_Digits) >= iTrailStart)return;
                   {
                    if(OrderStopLoss() > Ask + iTrailDist*Point || OrderStopLoss()==0)return;
                      {
                       if(iTrailStep > 0.0 && OrderStopLoss() == 0.0 && NormalizeDouble((OrderStopLoss() - Ask) - iTrailDist * Point(),_Digits) < iTrailStep * Point())return;
                         {
                          sl_lev = NormalizeDouble(Ask + iTrailDist * Point(),_Digits);
                          double iprice=NormalizeDouble(Ask + sl_lev,Digits);
                          if(iprice > MarketInfo(Symbol(),MODE_STOPLEVEL) * Point) return;
                            {
                            if(OrderModify(Forder, OrderOpenPrice(),sl_lev,OrderTakeProfit(), OrderExpiration()))
                            Print("Не удалось модифицировать стоплосс ордера №",OrderTicket(),". Ошибка: ",GetLastError());
}}}}}}}}*/
//xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx//
//+----------------------------------------------------------------------------+
//|                             Трейлинг стоп                                  |
//+----------------------------------------------------------------------------+
void TrailSL()
  {
   if (iTrailStart <= 0 ) return ; 
      
   double sl_lev;
         
   for ( int i= OrdersTotal ()- 1 ; i>= 0 ; i--)
     {
       if ( OrderSelect (i, SELECT_BY_POS,MODE_TRADES))
        {
         if (OrderSymbol() == Symbol () && OrderMagicNumber() == Magic)
           {
             if (OrderType() == OP_BUY) 
              {
               if ((OrderStopLoss() == 0 && Bid > OrderOpenPrice() + iTrailStart * _Point )||(OrderStopLoss() != 0 && Bid > OrderStopLoss() + (iDistTrail+iTrailStep) * _Point ))
                 {
                  sl_lev = NormalizeDouble (Bid - iDistTrail * _Point , Digits );
                   if (OrderModify(OrderTicket(), OrderOpenPrice(), sl_lev, OrderTakeProfit(), 0 , clrRed ))
                     Print ( "Удачная модифиция стоплосс ордера №" ,OrderTicket());
                   else
                     Print ( "Не удалось модифицировать стоплосс ордера №" ,OrderTicket(), ". Ошибка: " , GetLastError ());
                 }
              }
             if (OrderType() == OP_SELL) 
              {
               if ((OrderStopLoss() == 0 && Ask < OrderOpenPrice() - iTrailStart * _Point )||(OrderStopLoss() != 0 && Ask < OrderStopLoss() - (iDistTrail+iTrailStep) * _Point ))
                 {
                  sl_lev = NormalizeDouble (Ask + iDistTrail * _Point , Digits );
                   if (OrderModify(OrderTicket(), OrderOpenPrice(), sl_lev, OrderTakeProfit(), 0 , clrRed ))
                     Print ( "Удачная модифиция стоплосс ордера №" ,OrderTicket());
                   else
                     Print ( "Не удалось модифицировать стоплосс ордера №" ,OrderTicket(), ". Ошибка: " , GetLastError ());
                 }
              }
           }
        }
     }
  }
//+------------------------------------------------------------------+

Tretyakov Rostyslav 2021.12.15 15:21 #18164

Alexander Avksentyev #:

Kennen Sie diese Schaltfläche?

Tretyakov Rostyslav 2021.12.15 15:27 #18165

Alexander Avksentyev #:

Hier ist der Code, vielleicht gebe ich etwas falsch an, aber es gibt keinen Effekt.

Sie haben das Schleppnetz auskommentiert!!!

 /*  iTrailStart= MarketInfo(Symbol(), MODE_STOPLEVEL * Point);
   iTrailSL();
 */

Alexander Avksentyev 2021.12.15 15:27 #18166

Tretyakov Rostyslav #:

Kennen Sie diese Schaltfläche?

ok

Dateien:

Test34.mq4 37 kb

Alexander Avksentyev 2021.12.15 15:28 #18167

Tretyakov Rostyslav #:

Sie haben doch das Schleppnetz empfohlen!!!

gibt es mehrere

Tretyakov Rostyslav 2021.12.15 15:31 #18168

Alexander Avksentyev #:

gibt es mehrere

Sie haben das Schleppnetz in OnTick() auskommentiert

Alexander Avksentyev 2021.12.15 16:57 #18169

Tretyakov Rostyslav #:
Sie haben das Schleppnetz in OnTick() auskommentiert

Es gab zwei Schleppnetze, eines von Ihnen und eines von mir, die zerlegt wurden.

Ich habe alles in Ordnung gebracht. Es funktioniert.

Ich habe alles gelöscht und neu geschrieben.

Vielen Dank für Ihre Hilfe!

Ich werde weiter nachforschen, um herauszufinden, warum das alte Schleppnetz nicht funktioniert hat.

Fehler, Irrtümer, Fragen Multi-Timeframe-Indikatoren [WARNUNG GESCHLOSSEN!] Alle Fragen

Tretyakov Rostyslav 2021.12.15 17:12 #18170

Alexander Avksentyev #:

Es gab zwei Schleppnetze, eines von Ihnen und eines von mir, die demontiert waren.

Ich habe alles in Ordnung gebracht. Es funktioniert.

Ich habe alles gelöscht und neu geschrieben.

Vielen Dank für Ihre Hilfe!

Ich werde weiter nachforschen, um herauszufinden, warum das alte Schleppnetz nicht funktioniert hat.

Ich habe gesehen, dass es zwei Schleppnetze gab, aber Sie haben sich zu einem Schleppnetz geäußert.

Fragen von Neueinsteigern zu MQL4 und MQL5, Hilfe und Diskussion über Algorithmen und Codes - Seite 1817