По завершении установки в меню "Пуск" создается группа программ торговой платформы, а на рабочем столе дополнительно помещается ярлык программы. Используйте их для запуска. Нельзя запускать одновременно две копии платформы из одной директории. Чтобы одновременно запустить несколько копий, установите соответствующее количество программ в разные...
人们,分享一些信息。你用对齐的方法做什么?
这是 以浣熊为导向的编程!
唉,没有它是不行的;)
这是 以浣熊为导向的编程!
唉,没有它是不行的;)
我很清楚这一点。我不是要你教我OOP的知识。我问的是谁在什么情况下使用排列组合。
人们,你能分享一些信息吗?你用对齐的方法做什么?
在多线程环境中,这一切都很方便,我是这样看的。MKL与此有什么关系?我不知道,这个问题被问到了,所以我被卡住了。
而总的来说--这些都是基础知识,对于任何像样的程序员来说,基本的理解是必要的。
ZS:嗯,这里有很多速度狂人,如果他们开始智能地调整一切,他们应该飞得更快,至少在理论上。人们,分享一些信息。你用对齐的方法做什么?
Vict:
ZS:这里有很多速度爱好者,如果他们开始弄好了,至少在理论上应该走得更快。
一般来说,我甚至没有想到。
这段代码有点过于复杂--我试着把那个不适合缓存行的元素直接撞上去,但是失败了(如果我想的话可能可以做到,但是我觉得很无聊),而且我没有对代码做太多改动。但这更让人印象深刻--16次折叠中只有一次是在不属于缓存线的元素上进行的,但它给出了合理的结果。
SZY:在这种情况下,更客观的做法是通过插入两个短的来做RIGHT_ALIGNED,而不是删除唯一的(所以我们在两种情况下都会实现缓存线的两次更新)。速度的提升会比较小,但仍然是1.5倍左右。
顺便说一下,在mql中,pack的默认值是1,有点像。
从以前的帖子来看,也许对所有结构和类明确规定8是有意义的。
我无法克服这个错误。
我从Metatrader的交付中提取了 "之 "字形,以证明这个错误。在代码中增加了额外的缓冲区,取自我的程序。在这段代码中没有打算用额外的缓冲区进行操作。他们只是为了证明这个错误。
在欧元兑美元的H1时间框架上绘制了这个之字形图。关闭终端。从历史上删除了所有生成的欧元兑美元的时间序列。也就是说,删除了欧元兑美元货币对的所有*.hcc和*.hc文件。这样做是为了确保加载.hcc文件和从一个干净的表单中生成.hc文件。
终端启动 后,你会在欧元兑美元的图表上看到很多人工痕迹。这些神器是无法处理的。
我把修改后的 "之 "字形代码以文本和文件的形式附上。
我想提醒你,"之 "字形的参数是通过#propert指定的。
所有其他的缓冲区都不是通过#propert设置的,因为所有的东西,包括zigzags缓冲区,都是动态变化的。
请帮助终端开发者修复这个错误。
有人工痕迹的图片。
我无法克服这个错误。
我从Metatrader的交付中提取了 "之 "字形,以证明这个错误。在代码中增加了额外的缓冲区,取自我的程序。本代码中没有提供额外的缓冲区的操作。他们只是为了证明这个错误。
在欧元兑美元的H1时间框架上绘制了这个之字形图。关闭终端。从历史上删除了所有生成的欧元兑美元的时间序列。也就是说,删除了欧元兑美元货币对的所有*.hcc和*.hc文件。这样做是为了确保加载.hcc文件和从一个干净的表单中生成.hc文件。
终端启动 后,你会在欧元兑美元的图表上看到很多人工痕迹。这些神器是无法处理的。
我把修改后的 "之 "字形代码以文本和文件的形式附上。
我想提醒你,"之 "字形的参数是通过#propert指定的。
所有其他的缓冲区都不是通过#propert设置的,因为所有的东西,包括zigzags缓冲区,都是动态变化的。
请帮助终端开发者修复这个错误。
有人工痕迹的图片。
所有的缓冲区都需要被初始化。
如果缓冲区内没有酒吧的值,必须明确写入缓冲区。换句话说,如果计算值要输出到缓冲区,就把它写到缓冲区,否则就写一个空值。
总的来说,我甚至没有想到会这样。
我自己的运行情况没有显示出明显的差异。
如果代替
关于交易、自动交易系统和策略测试的论坛
虫子,虫子,问题
胜利, 2019.07.09 07:17
Data data[32768];
使
有一个6倍的减速!
所有的缓冲区都需要被初始化。
如果酒吧的缓冲区内没有值,必须明确地写入缓冲区内。也就是说,如果计算值应该输出到缓冲区,我们就把它写到缓冲区,否则就写空值。
对不起,我错过了初始化。我的程序里有这个东西,但在例子里漏掉了。
附上一个带有初始化的文件。其效果是一样的。
对开发商来说,问题依然存在。请修复这个错误。
-------------
在我看来,会发生以下情况。当与终端一起启动程序时,时间序列大小要么等于零,要么有一些最小值。
程序在现有的历史片段上被初始化。但是当时间序列的大小增加时,没有通过初始化的内存片段被用于缓冲区阵列。因此,我们有这样的效果。
我试图用终端的事件来处理这种效果。同样的,伪影出现的时间只有几分之一秒。而这并不是好事。这样的方案一定不会被释放。
下面是如何解决这个问题。在为缓冲区分配完内存后,你应该立即清除这部分内存。但我们如何才能做到这一点呢?我还没有在终端应用程序的开发者那边发现这样的功能。