Нужна конвертация стратегии из pine в mql5

Здравствуйте!

необходимо конвертировать стратегию под названием "Open Close Cross Strategy R5.1 revised by JustUncleL" на сайте tradingview.com, код стратегии привожу ниже. Необходимо, чтобы настройки стратегии были так же на MetaTrader 5.

//@version=3

//

strategy(title = "Open Close Cross Strategy R5.1 revised by JustUncleL", shorttitle = "OCC Strategy R5.1", overlay = true, 

  pyramiding = 0, default_qty_type = strategy.percent_of_equity, default_qty_value = 10, calc_on_every_tick=false)

//

// Revision:        5

// Original Author: @JayRogers

// Revision Author: JustUncleL revisions 3, 4, 5

//

// *** USE AT YOUR OWN RISK ***

//  - There are drawing/painting issues in pinescript when working across resolutions/timeframes that I simply

//    cannot fix here.. I will not be putting any further effort into developing this until such a time when

//    workarounds become available. 

//    NOTE: Re-painting has been observed infrequently with default settings and seems OK up to Alternate 

//          multiplier of 5.

//          Non-repainting mode is available by setting "Delay Open/Close MA" to 1 or more, but the reported

//          performance will drop dramatically.

//

// R5.1 Changes by JustUncleL

//  - Upgraded to Version 3 Pinescript.

//  - Added option to select Trade type (Long, Short, Both or None)

//  - Added bar colouring work around patch.

//  - Small code changes to improve efficiency.

//  - NOTE: To enable non-Repainting mode set "Delay Open/Close MA" to 1 or more.

//  9-Aug-2017

//  - Correction on SuperSmooth MA calculation.

//

// R5 Changes by JustUncleL

//  - Corrected cross over calculations, sometimes gave false signals.

//  - Corrected Alternate Time calculation to allow for Daily,Weekly and Monthly charts.

//  - Open Public release.

// R4 Changes By JustUncleL

//  - Change the way the Alternate resolution in selected, use a Multiplier of the base Time Frame instead,

//    this makes it easy to switch between base time frames.

//  - Added TMA and SSMA moving average options. But DEMA is still giving the best results.

//  - Using "calc_on_every_tick=false" ensures results between backtesting and real time are similar.

//  - Added Option to Disable the coloring of the bars.

//  - Updated default settings.

//

// R3 Changes by JustUncleL:

//  - Returned a simplified version of the open/close channel, it shows strength of current trend.

//  - Added Target Profit Option.

//  - Added option to reduce the number of historical bars, overcomes the too many trades limit error.

//  - Simplified the strategy code.

//  - Removed Trailing Stop option, not required and in my opion does not work well in Trading View,

//    it also gives false and unrealistic performance results in backtesting.

//

// R2 Changes:

//  - Simplified and cleaned up plotting, now just shows a Moving Average derived from the average of open/close.

//  - Tried very hard to alleviate painting issues caused by referencing alternate resolution..

//

// Description:

//  - Strategy based around Open-Close Crossovers.

// Setup:

//  - I have generally found that setting the strategy resolution to 3-4x that of the chart you are viewing

//    tends to yield the best results, regardless of which MA option you may choose (if any) BUT can cause

//    a lot of false positives - be aware of this

//  - Don't aim for perfection. Just aim to get a reasonably snug fit with the O-C band, with good runs of

//    green and red.

//  - Option to either use basic open and close series data, or pick your poison with a wide array of MA types.

//  - Optional trailing stop for damage mitigation if desired (can be toggled on/off)

//  - Positions get taken automagically following a crossover - which is why it's better to set the resolution

//    of the script greater than that of your chart, so that the trades get taken sooner rather than later.

//  - If you make use of the stops, be sure to take your time tweaking the values. Cutting it too fine

//    will cost you profits but keep you safer, while letting them loose could lead to more drawdown than you

//    can handle.

//  - To enable non-Repainting mode set "Delay Open/Close MA" to 1 or more.

//

// === INPUTS ===

useRes      = input(defval = true, title = "Use Alternate Resolution?")

intRes      = input(defval = 3,    title = "Multiplier for Alernate Resolution")

stratRes    = ismonthly? tostring(interval*intRes,"###M") : isweekly? tostring(interval*intRes,"###W") : isdaily?  tostring(interval*intRes,"###D") : isintraday ? tostring(interval*intRes,"####") : '60'

basisType   = input(defval = "SMMA", title = "MA Type: ", options=["SMA", "EMA", "DEMA", "TEMA", "WMA", "VWMA", "SMMA", "HullMA", "LSMA", "ALMA", "SSMA", "TMA"])

basisLen    = input(defval = 8, title = "MA Period", minval = 1)

offsetSigma = input(defval = 6, title = "Offset for LSMA / Sigma for ALMA", minval = 0)

offsetALMA  = input(defval = 0.85, title = "Offset for ALMA", minval = 0, step = 0.01)

scolor      = input(false, title="Show coloured Bars to indicate Trend?")

delayOffset = input(defval = 0, title = "Delay Open/Close MA (Forces Non-Repainting)", minval = 0, step = 1)

tradeType   = input("BOTH", title="What trades should be taken : ", options=["LONG", "SHORT", "BOTH", "NONE"])

// === /INPUTS ===

// Constants colours that include fully non-transparent option.

green100 = #008000FF

lime100  = #00FF00FF

red100   = #FF0000FF

blue100  = #0000FFFF

aqua100  = #00FFFFFF

darkred100 = #8B0000FF

gray100 = #808080FF

// === BASE FUNCTIONS ===

// Returns MA input selection variant, default to SMA if blank or typo.

variant(type, src, len, offSig, offALMA) =>

    v1 = sma(src, len)                                                  // Simple

    v2 = ema(src, len)                                                  // Exponential

    v3 = 2 * v2 - ema(v2, len)                                          // Double Exponential

    v4 = 3 * (v2 - ema(v2, len)) + ema(ema(v2, len), len)               // Triple Exponential

    v5 = wma(src, len)                                                  // Weighted

    v6 = vwma(src, len)                                                 // Volume Weighted

    v7 = 0.0

    v7 := na(v7[1]) ? sma(src, len) : (v7[1] * (len - 1) + src) / len    // Smoothed

    v8 = wma(2 * wma(src, len / 2) - wma(src, len), round(sqrt(len)))   // Hull

    v9 = linreg(src, len, offSig)                                       // Least Squares

    v10 = alma(src, len, offALMA, offSig)                               // Arnaud Legoux

    v11 = sma(v1,len)                                                   // Triangular (extreme smooth)

    // SuperSmoother filter

    // © 2013  John F. Ehlers

    a1 = exp(-1.414*3.14159 / len)

    b1 = 2*a1*cos(1.414*3.14159 / len)

    c2 = b1

    c3 = (-a1)*a1

    c1 = 1 - c2 - c3

    v12 = 0.0

    v12 := c1*(src + nz(src[1])) / 2 + c2*nz(v12[1]) + c3*nz(v12[2])

    type=="EMA"?v2 : type=="DEMA"?v3 : type=="TEMA"?v4 : type=="WMA"?v5 : type=="VWMA"?v6 : type=="SMMA"?v7 : type=="HullMA"?v8 : type=="LSMA"?v9 : type=="ALMA"?v10 : type=="TMA"?v11: type=="SSMA"?v12: v1

// security wrapper for repeat calls

reso(exp, use, res) => use ? security(tickerid, res, exp, gaps=barmerge.gaps_off, lookahead=barmerge.lookahead_on) : exp

// === /BASE FUNCTIONS ===

// === SERIES SETUP ===

closeSeries     = variant(basisType, close[delayOffset], basisLen, offsetSigma, offsetALMA)

openSeries      = variant(basisType, open[delayOffset], basisLen, offsetSigma, offsetALMA)

// === /SERIES ===

// === PLOTTING ===

// Get Alternate resolution Series if selected.

closeSeriesAlt = reso(closeSeries, useRes, stratRes)

openSeriesAlt = reso(openSeries, useRes, stratRes)

//

trendColour = (closeSeriesAlt > openSeriesAlt) ? green : red

bcolour     = (closeSeries > openSeriesAlt) ? lime100 : red100

barcolor(scolor?bcolour:na, title = "Bar Colours")

closeP=plot(closeSeriesAlt, title = "Close Series", color = trendColour, linewidth = 2, style = line, transp = 20)

openP=plot(openSeriesAlt, title = "Open Series", color = trendColour, linewidth = 2, style = line, transp = 20)

fill(closeP,openP,color=trendColour,transp=80)

// === /PLOTTING ===

//

//

// === ALERT conditions

xlong       = crossover(closeSeriesAlt, openSeriesAlt)

xshort      = crossunder(closeSeriesAlt, openSeriesAlt)

longCond    = xlong   // alternative: longCond[1]? false : (xlong or xlong[1]) and close>closeSeriesAlt and close>=open

shortCond   = xshort  // alternative: shortCond[1]? false : (xshort or xshort[1]) and close<closeSeriesAlt and close<=open

// === /ALERT conditions.

// === STRATEGY ===

// stop loss

slPoints    = input(defval = 0, title = "Initial Stop Loss Points (zero to disable)", minval = 0)

tpPoints    = input(defval = 0, title = "Initial Target Profit Points (zero for disable)", minval = 0)

// Include bar limiting algorithm

ebar            = input(defval = 10000, title="Number of Bars for Back Testing", minval=0)

dummy           = input(false,        title="- SET to ZERO for Daily or Longer Timeframes" )

//

// Calculate how many mars since last bar

tdays       = (timenow-time)/60000.0  // number of minutes since last bar

tdays       := ismonthly? tdays/1440.0/5.0/4.3/interval : isweekly? tdays/1440.0/5.0/interval : isdaily? tdays/1440.0/interval : tdays/interval // number of bars since last bar

//

//set up exit parameters

TP = tpPoints>0?tpPoints:na

SL = slPoints>0?slPoints:na

// Make sure we are within the bar range, Set up entries and exit conditions

if ((ebar==0 or tdays<=ebar) and tradeType!="NONE")

    strategy.entry("long", strategy.long, when=longCond==true and tradeType!="SHORT")

    strategy.entry("short", strategy.short, when=shortCond==true and tradeType!="LONG")

    strategy.close("long", when = shortCond==true and tradeType=="LONG")

    strategy.close("short", when = longCond==true and tradeType=="SHORT")

    strategy.exit("XL", from_entry = "long", profit = TP, loss = SL)

    strategy.exit("XS", from_entry = "short", profit = TP, loss = SL)

// === /STRATEGY ===

// eof